stone mill used for sale

Notching cutter Comall Type: Mill One

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

This Mazak SLANT TURN 40N - ATC Mill center 1500 was manufactured in 1986. A robust turn-mill centre, it offers reliable performance for various machining needs. Consider the opportunity to buy this Mazak SLANT TURN 40N - ATC Mill center 1500. Contact us for more information.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm With jacketcheck Jet Mills MaterialStainless steel 1.4306 (304L) General MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicMicromacinazioneMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food &  ...

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm General No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX designedcheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steelWith sound proof cabinetWorking hours 56 hrsBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsSiebtechnikMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries  ...

General SKU022Y162 LocationBarneveld MakeComec Sassuolo TypeMicronet Tipo M8 No.7107 Material Housing materialStainless steel Disc materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Specified Features - Sand mill Vertical sandmill:Discontinuous micro ball mill: (1x) Capacity8 Ltr Housing dimensions dia. 170x335mm With sievecheck With jacketcheck Motorcheck MaterialStainless steel With jacketcheck General Year of construction1995 With switchcheck Floorspace0,6x0,6 M Total height1,1 M Weight160 KG Extra Specifications- Mixing chamber equipped with 2 dissolver discs (dia. 115mm) on 1 shaftSand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU353S829 MakeHosokawa Micron TypeACM-15 No.600088071 Year of construction1988 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 With grinding trackcheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts With variable speed drivecheck Speed160 - 1 600 rpm. With jacketcheck Classifier Mills MaterialMild steel General Mounted on framecheck LocationBarneveld With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul&:nbsp:RAL 6, with spare partsClassifier millsPowdered foodsGeneric m ...

General SKU377S917 LocationBarneveld MakeNeumann &: Esser Main Features Motor7.5 KW Inlet diameter55 mm Specified Features - Classifier mill Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm InletDN 50 Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 7,5 kW 380-420/660-690 Volt With jacketcheck Classifier Mills MaterialMild steel, Stainless steel General TypeICM-15 No.02.300.0166 Year of construction2002 Floorspace1,25x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith:Dosing airlockDust collectorCyclone collectorEx barier valveTurbofanClassifier millsPowdered foodsGeneric medicinesStarchSpicesCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inor ...

General SKU353S828 MakeHosokawa Micron TypeACM-15 No.600880072 Year of construction1988 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 Without sieve cagecheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts Speed160 - 1 600 rpm. With jacketcheck Classifier Mills MaterialMild steel General Mounted on framecheck LocationBarneveld With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul&:nbsp:RAL 6Classifier millsPowdered foodsGeneric medicinesStarchSpicesCatalysts & fillersFeed additiv ...

General SKU262M267 MakeDrais TypePM-1 STS No.52729 Year of construction1986 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume1.3 Ltr. Motor3.6 KW Specified Features - Sand mill Vertical sandmillcheck Capacity1.0 Ltr With jacketcheck Motor3,6 KW 220/380 Volt 50 Herz With pumpcheck Motor0,12 KW 220/380 Volt (Ex) 50 Hertz With variable speed drivecheck MaterialStainless steel With jacketcheck General With switchgearcheck Floorspace1.3x0.7 M Total height1.0 M Weight250 KG ATEX designedcheckSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

General SKUR1161 MakeHoogendijk Utrecht (NL) LocationBarneveld Type3ET Main Features MaterialMild steel Motor0.55 KW Specified Features - Ball mill Frame with rollscheck Between the rolls55, 80, 105, 130, 155, 180, 205, 230, 255mm Number of stages:3 Motor0,55 kW 220/380 Volt Speed38-66 rpm MaterialMild steel General No.875 Year of construction1988 Floorspace1,9x0,5 M Total height1,5 M Weight350 KgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigments-Mills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Con ...

General SKU362X851 MakeCOLLIN LocationBarneveld CEcheck Type3-Roller Calander: calander type 250 × 600 Main Features Motor46 KW Width600 mm Specified Features - Mixing mill Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooled(roller 2&:3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjusted0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Mixing mills MaterialHardened Tool Steel General No.4490-07-06 Year of construction2006 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg Extra SpecificationsApplication: finishing/planishing of foil materials up to 2 mm thickness&: ...

General SKUR1382 LocationBarneveld MakeHosokawa Mikropul (D) Main Features Motor15 KW Inlet diameter50 mm Specified Features - Classifier mill Grinderclassifying fine impact mill 2 Driven rotorscheck Rotor sizedia. 195mm Grinding room sizedia.330x130mm Pin diameter10mm (16x) With grinding trackcheck Inletdia. 220mm rotating valve to inlet 50mm Feeding with rotating valvecheck Motormill 15,0 kW, classifier 3,0 kW , 380 Volt Classifier Mills MaterialMild steel General TypeACM 10 No.600088063 Year of construction1988 Mounted on framecheck With switchgear(as is) Floorspace1,5x1,9 M Total height1,2 M Weight900 Kg Extra Specificationswith ventilator, explosion valves and noise reduction pipeClassifier millsPowdered foodsGeneric medicinesStarchSpicesCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesSugarAnimal feedOther feedSolid pharmaceutics ...

Key data: 1000 mm, 450 mm

Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel

Used colloid mill made by JM Series Colloid Miller. New 2008. 11kW motor.

General SKU223Y099 MakeAlpine TypeAFG-100 Year of construction1985 Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck Jet Mills MaterialStainless steel 1.4541 (321) General LocationBarneveld Mounted on wheelscheck With switchgear(as is) Floor space1,70 x 1,10 m Total height2,40 m Extra SpecificationsWith K-Tron dosing screw, type T20A, 0.25 kW:Becker vacuum pump:Alpine stainless steel filter, type K6R, 2.4 m²:with spare rotors and parts:Jet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicAlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillers ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill Grinder(Agitated ball mill (dry grinding)) With jacketcheck Ball mills Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Specified Features - Ball mill Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck MaterialStainless steel 1.4301 (304) General No.M3 239783 Year of construction2016 Mounted on framecheck With switchgear(as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders.The dry agitated bead mill is equipped with an integrated d ...

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cage2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgear(as is) Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

Turning and milling machine combined in one machine. The most stable table milling machine in the world! Machine tool MD-23 Rotary equipment: - complete tailstock - Three-jaw chuck with jaws stepped inwards and outwards - Turning tool holder - matching feed flange Horizontal milling device: - milling shaft - Counterholder including fastening rails Tools and clamping devices - Machine vice - a selection of cutters and holders - different rotating center punches - two boring heads - Cone wiper - Clarkson collet holders - ER32 collet holders And original Waldmann machine light

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

General SKU135N667 MakeSussmeyer TypeHM 150 E.H.P. No.103780 Year of construction1990 LocationBarneveld Main Features MaterialMild steel Volume150 Ltr. Motor84 KW Specified Features - Sand mill Horizontal sand millcheck Capacity150 Ltr. Housing dimensions Dia. 420x1300mm With mechanical sealcheck With jacketcheck Motor84 KW, 380/660 Volt (Ex) With variable speed drivecheck MaterialMild steel With jacketcheck General Floorspace3,6x1,5 m Total height1,9 m Weight4250 kg ATEX designedcheckSand millsDiscountSussmeyerMills > Sand millsDiscountBrand > Sussmeyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU092A453 MakeDrais TypePMV-25 RL (RL=Lochscheiben-Rührwerk) No.53418 Year of construction1989 LocationBarneveld Material Disc materialStainless steel Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialMild steel Volume26 Ltr. Motor24 KW Specified Features - Sand mill MaterialNickel alloy (201) 2.4068 Vertical sandmill(1x) Capacity26,0 Ltr Housing dimensions dia. 230x580mm With jacketcheck Motor24,0 KW, 380/660 Volt (Ex) CapacityMax. 750 Ltr/Hr With pumpcheck Motor0,75 KW, 220/380 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace1,6x0,9 M Total height2,3 M Weight1400 KGSand millsDiscountDraisMills > Sand millsDiscountBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide - ...

General SKU286M327 LocationBarneveld MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General No.:unknown, manufacturer tag is missing: Year of construction±2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndust ...

General SKU286M326 LocationBarneveld MakeALPINE A.G./ Henco &: Co. Type:ATP200 / 4ATP: No.:unknown, manufacturer tag is missing: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General Year of construction+/- 2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesInd ...

General SKU286M325 LocationBarneveld MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General No.:manufacturer tag is missing: Year of construction±2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsTea, herbs & coffeeCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicHosokawa AlpineMills > Jet MillsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Fo ...

X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening  ...

General SKU256Y259 LocationBarneveld CEcheck Main Features MaterialMild steel Volume0.25 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck CapacityMax 4 x 250 ml Drum sizesDia. 75x65 mm Motor1.1kW, 230V Speed30-400 rpm With ballscheck MaterialTool steel 1.2080 General MakeRetsch Haan Serial6260312 TypePM 4000 Year of construction1996 With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight350 kgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsNew arrivalsRetsch HaanMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Fee ...

Warco WM40 turret mill with 2 axis DRO and with a third DRO retro fitted to the knee (Z axis). The X axis has powered feed and the knee has powered height adjustment.

milling machine, year 1990. Used machine in good condition. More info & price on IndustrialBuyer.

ATEX basket mill from the NTD brand model UVI MILL-CN10 VE ATEX. Features: Maximum pressure 8 kg/cm2 Maximum temperature 50 ºC Maximum speed: 750 rpm Maximum shaft height 1000 mm Cowless diameter 248 mm Motor 7.5 kw 1460 rpm 50 hz 400 v Technical characteristics Model UVI MILL-CN 10 VE ATEX Year of manufacture 2017 Motor 7.5 kw 1460 rpm 50 hz 400 v Transportation Information Length 1560 mm Width 700 mm Height 1660 mm Weight 500 Kg Documentation CE Certificate Maintenance Manual Operation Manual Plans Electrical diagrams In your state

Key data: 250 mm, 600 mm

24” wide x 10” diam. Two Roll Mill Emergency stop button at the front of the machine & a guard above the roller

Key data: 150 mm, 300 mm

Francis Shaw 300mm (12") wide x 150mm (6”) diam Two Roll Lab Mill Even and friction

General SKU313Y647 MakeRetsch TypePM400 No.TU 2145 Year of constructionunknown LocationBarneveld Main Features MaterialCeramic Volume0.4 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck Capacity4 x 400 ml Drum sizesDia. 80x80mm InletDia. 60mm Motor1,5kW, 230v Speed30-400 rpm MaterialCeramic General Mounted on wheelscheck With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight250 kgBall millsSpicesCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsNew arrivalsRetschMills > Ball millsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIn ...

Completely food-safe stainless steel construction for surfaces that come into contact with the product.Blades/hammers → blunt hammer elements on both sides.Cooling → water cooling integrated into the system. Machine as good as new (unused)

Stainless steel Jet Mill. About 3 legs. Features: Vertical inner diameter 77 mm Lower outlet diameter 52 mm inside 72 mm outer diameter junction outlet. Transportation Information Width 550 mm Height 1050 mm No documentation In your state

Mill of the brand FITZ MILL model D. Stainless steel with iron structure with 4 wheels. Motor 6.8 kw 1430 rpm 50 hz 390 v NW100 bottom outlet Maximum top entry 250 mm Top inlets 115 mm Transportation Information Length 1400 mm Width 1300 mm Height 1700 mm No documentation In your state

General SKU297Y562 MakeCondux TypeCGS32/V-DSF No.93102312 Year of construction1994 Main Features Motor4 KW Inlet diameter100 mm Specified Features - Jet Mill Rotor sizeø 170 mm Grinding room sizeø 340 mm Housing dimensions ø 340 mm InletDN 100 Motor4,0 kW (400 V 2900 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Mounted on framecheck LocationBarneveld Floor space1,30 x 1,20 m Total height2,00 m Weight580 kg Extra SpecificationsOutput DN80Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Millipore IsoPak STS, System equipped to pack and unpack columns for Millipore K Prime Biochromatography system year of manufacturing 2000

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)