still hamburg used for sale

Equipment: 7606032 Brand: STILL Model: RX20-20P Operating hours: 1133 Year of construction: 2018 Mast: Telescopic mast Overall height: 2,310 mm Nominal stroke: 3,450 mm Free lift: Hydraulic actuation: Multi-lever Battery: including load capacity: 2,000 kg, Condition: Nameplate damaged Fork carriage clearance Hydraulic hoses damaged Forks crooked Interior trim damaged Wheels front damaged Wheels rear Damaged and out of round Frame Rust spots Rear trim Dents Battery door Rust spots Battery terminals oxidized and sunken End discharge damaged and oxidized Paint damage Auction-ID: A7-45634-80

Equipment: 7562108 Manufacturer: STILL Type designation: RX20-16 Operating hours: 8919 h Year of construction: 2021 Mast: triple mast Overall height: 2,060 mm Nominal stroke: 4,620 mm Free lift: 1,470 mm Hydraulic actuation: Mini lever Battery included: Including load capacity: 1,600kg Condition description: Mast rollers play Fork carriage and tilt cylinder knocked out Hydraulic hoses damaged Forks crooked roof window cracked Seat upholstery and interior trim damaged Front wheels Worn rear wheels damaged Front axle makes noise Frame, overhead guard and battery door Dents Battery terminals and trough oxidized Battery terminals increased and sunken Paint damage Auction-ID: A7-45634-134

Equipment: 7464417 Brand: STILL Model: RX50-13 Operating hours: 1340 Year of construction: 2018 Mast: Telescopic mast Overall height: 2,160 mm Nominal stroke: 3,230 mm Free lift: Hydraulic actuation: Multi-lever Battery: Load capacity: Included: Load capacity: 1,250 kg , Condition: Tilt cylinder knocked out Forks crooked seat cushion damaged Rear wheels out of round Frame dents Paint damage Auction-ID: A7-45634-91

Equipment: 7476642 Brand: STILL Model: EXU16 Operating hours: 1884 Year of construction: 2019 Mast: Height: Nominal stroke: Free lift: Hydraulic actuation: Battery: Including load capacity: 1,600 kg, Condition: Nameplate damaged Slewing ring bearing Clearance Battery cover bent Paint damage Auction-ID: A7-45634-112

Equipment: 7661177 Manufacturer: STILL Type designation: RX20-18PL Hours: 3787 h Year of Make: 2020 Mast: Triple mast Overall height: 2,060 mm Nominal stroke: 3,160 mm Free lift: 1,500 mm Hydraulic Actuation: Fingertip Battery Included: Included Load capacity: 1,600 kg Condition description: Special use: Feed Nameplate missing Fork carriage clearance and chips in the mast Seat cushion damaged Battery terminals increased Battery trough and end discharge oxidized Paint damage Auction-ID: A7-45634-171

Equipment: 7497874 Manufacturer: STILL Type designation: RX20-20L Operating hours: 8891 h Year of construction: 2018 Mast: triple mast Overall height: 2,160 mm Nominal stroke: 4,780 mm Free lift: 1,670 mm Hydraulic actuation: Mini lever Battery included: Including load capacity: 2,000kg Condition description: Mast rollers and fork carriages Play chips in the mast Rims front damaged Frame dents Rear fairing dents Battery door dents Battery terminals oxidized and sunken, trough oxidizes paint damage Fork positioner: AA: 1030 mm AI: 795 mm ZA: 310 mm ZI: 75 mm Auction-ID: A7-45634-124

Equipment: 7336688 Brand: STILL Model: EXV20 Operating hours: 2414 Year of construction: 2020 Mast: NiHo Overall height: 2,365 mm Nominal stroke: 3,584 mm Free lift: 1,835 mm Hydraulic actuation: Battery: Including load capacity: 2,000 kg, Condition description: Pull chain jumped from the bracket Engine and battery cover damaged Paint damage Auction-ID: A7-45634-96

Equipment: 7476599 Brand: STILL Model: EXU16 Operating hours: 1572 Year of construction: 2019 Mast: Overall height: Nominal stroke: Free lift: Hydraulic actuation: Battery: Including load capacity: 1,600 kg, Condition description: Engine cover + drive wheel damaged Slewing ring bearing knocked out Battery cover dents Battery trough + pole oxidized Paint damage Auction-ID: A7-45634-109

Equipment: 7693570 Brand: STILL Model: RX60-35 Operating hours: 1471 Year of construction: 2019 Mast: triple mast Overall height: 2,375 mm Nominal stroke: 5,190 mm Free lift: 1,630 mm Hydraulic actuation: Fingertip Battery: Including load capacity: 3,500 kg, Condition description: Tilt cylinder knocked out Mast bearing play Forks crooked Door damaged Wheels front and rear damaged Rear fairing dents Battery door panel damaged battery trough oxidizes paint damage Fork positioner: AA: 1330 mm AI: 1090 mm ZA: 340 mm ZI: 100 mm Auction-ID: A7-45634-10

Equipment: 7514701 Manufacturer: STILL Type designation: RX60-45 Operating hours: 8686 h Year of construction: 2019 Mast: Telescopic mast Height: 3,250 mm Nominal stroke: 4,880 mm Hydraulic actuation: Joystick4+ Battery included: Including load capacity: 4,500kg Condition description: Nameplate barely legible Mast rollers, fork carriage and tilt cylinder Backlash Hydraulic hoses damaged Door damaged Interior trim damaged Rear wheels damaged, battery terminals increase paint damage Auction-ID: A7-45634-128

Equipment: 7565823 Brand: STILL Model: EXU16 Operating hours: 2500 Year of construction: 2021 Mast: Height: Nominal stroke: Free lift: Hydraulic actuation: Battery: Including load capacity: 1,600 kg, Condition: Slewing ring bearing knocked out Battery poles oxidized Paint damage Auction-ID: A7-45634-115

Equipment: 7687630 Brand: STILL Model: RX20-20P Operating hours: 2709 Year of construction: 2020 Mast: triple mast Height: 2,260 mm Nominal stroke: 5,080 mm Free lift: 1,780 mm Hydraulic actuation: Mini lever Battery: Including load capacity: 2,000 kg, Condition description: Fork carriage clearance Mast rollers Mast bearings and tilt cylinders knocked out Door damaged Frame rusty Battery door Rust spots Battery terminals and trough Oxidizes paint damage Auction-ID: A7-45634-18

Equipment: 7473249 Brand: STILL Model: RXE13 Operating hours: 2203 Year of construction: 2023 Mast: Telescopic mast Height: 2,655 mm Nominal stroke: 4,170 mm Free lift: Hydraulic actuation: Mini lever Battery: Load capacity: 1,300 kg, Condition: Fork carriage knocked out Chips in the mast Wheels at the rear unround Paint damage Auction-ID: A7-45634-33

Equipment: 7600795 Brand: STILL Model: EXV16i Operating hours: 703 Year of construction: 2019 Mast: triple Height: 1,915 mm Nominal stroke: 4,266 mm Free lift: 1,515 mm Hydraulic actuation: Battery: Including load capacity: 1,600 kg, Condition description: Slewing ring bearing Game chassis worn out Paint damage Auction-ID: A7-45634-89

Equipment: 7621661 Brand: STILL Model: RX20-18 Operating hours: 3291 Year of construction: 2020 Mast: triple mast Overall height: 2,860 mm Nominal stroke: 6,670 mm Free lift: 2,270 mm Hydraulic actuation: Joystick4+ battery: including load capacity: 1,800 kg, Condition description: Fork carriage play Tilt cylinder and mast bearing knocked out Rims front damaged Battery door dents Battery pole increases paint damage Auction-ID: A7-45634-63

Equipment: 7651401 Manufacturer: STILL Type designation: RX60-25 Operating hours: 7499 h Year of construction: 2019 Mast: Telescopic mast Height: 2,775 mm Nominal stroke: 4,170 mm Hydraulic actuation: Multi-lever Battery included: Including load capacity: 2,500kg Condition description: Mast rollers, fork carriage and tilt cylinder Game display damaged Overhead guard Dents Rear fairing dents, damaged Battery terminals raised Paint damage Fork positioner: AA: 1145 mm AI: 945 mm ZA: 405 mm ZI: 205 mm Auction-ID: A7-45634-125

Equipment: 7208621 Brand: STILL Model: RX60-35 Operating hours: 1035 Year of manufacture: 2016 Mast: NIHO mast Overall height: 2,275 mm Nominal stroke: 3,290 mm Free lift: 1,500 mm Hydraulic actuation: Joystick4+ battery: including load capacity: 3,500 kg, Condition description: fork carriage and tilt cylinder Play Overhead guard dents Rear fairing dents Paint damage Auction-ID: A7-45634-35

Equipment: 7492196 Brand: STILL Model: R07-25 Operating hours: 9936 Year of construction: 2017 Mast: Overall height: Nominal stroke: Free lift: Hydraulic actuation: Battery: Including load capacity: , Condition description: Seat cushion damaged Axle Rust spots Battery pole increased Trough oxidizes Paint damage Auction-ID: A7-45634-95

Equipment: 7514704 Manufacturer: STILL Type designation: RX60-45 Operating hours: 7518 h Year of construction: 2018 Mast: Telescopic mast Height: 3,250 mm Nominal stroke: 4,880 mm Hydraulic actuation: Joystick4+ Battery included: Including load capacity: 4,500kg Condition description: Mast rollers and tilt cylinder Clearance Fork carriage knocked out Battery door Fairing damaged Paint damage Auction-ID: A7-45634-129

Equipment: 7481886 Brand: STILL Model: EXU18 Operating hours: 1969 Year of construction: 2018 Mast: Overall height: Nominal stroke: Free lift: Hydraulic actuation: Battery: Including load capacity: 1,800 kg, Condition: Paint damage Auction-ID: A7-45634-108

Equipment: 7685415 Brand: STILL Model: RCG35T Operating hours: 10 Year of construction: 2023 Mast: triple mast Height: 2,212 mm Nominal stroke: 4,650 mm Free lift: 1,490 mm Hydraulic actuation: Multi-lever Battery: 0 Load capacity: 3,500 kg, Condition: Paint damage Auction-ID: A7-45634-6

Equipment: 7591686 Brand: STILL Model: RX60-25 Operating hours: 965 Year of construction: 2016 Mast: triple mast Overall height: 2,275 mm Nominal stroke: 4,890 mm Free lift: 1,500 mm Hydraulic actuation: Mini lever Battery: including load capacity: 2,500 kg, Condition: Hydraulic hoses damaged Rear fairing Dents Battery door trim damaged Paint damage Auction-ID: A7-45634-37

Equipment: 7464437 Brand: STILL Model No.: RX50-13 Hours: 1367 Year of manufacture: 2018 Mast: Telescopic mast Overall height: 2,160 mm Nominal stroke: 3,230 mm Free lift: Hydraulic Actuation: Multi-lever Battery: included Load capacity: 1,250 kg Condition description: DTC F5043 Fork Carriage Game Tilt cylinder knocked out Hydraulic hoses damaged Seat cushion damaged Rear wheels out of round Frame dents Battery door dents Paint damage Auction-ID: A7-45634-162

Equipment: 7463524 Brand: STILL Model: RX50-13 Operating hours: 1982 Year of construction: 2018 Mast: Telescopic mast Overall height: 2,160 mm Nominal stroke: 3,230 mm Free lift: Hydraulic actuation: Multi-lever Battery: including load capacity: 1,250 kg, Condition description: Tilt cylinder clearance Interior trim damaged Paint damage Auction-ID: A7-45634-94

Equipment: 7470194 Brand: STILL Model: EXV16 Operating hours: 2534 Year of construction: 2019 Mast: Tele Overall height: 1,740 mm Nominal stroke: 2,344 mm Free lift: Hydraulic actuation: Battery: Including load capacity: 1,600 kg, Condition description: Battery terminals oxidized Engine cover damaged Paint damage Auction-ID: A7-45634-98

Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 ...

Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...

Used bottling line GAI for still wine up to 1000 bph Bottling line structure of the Used GAI filling line for still wine The line operates as a fully automated system that bottles still wines at a rate of up to 1000 bottles per hour. Consequently, the system ensures a seamless process by including a GAI filling and corking monoblock, an MEB ADL10 S2 labeling and capsuling machine, and an integrated conveyor system that guarantees continuous operation. Furthermore, each component is designed for efficiency and reliability. GAI filling and corking monoblock This bottling line for still wine features a GAI monoblock that fills and corks bottles within a single unit. Specifically, the filling system uses eight filling valves that operate under vacuum to optimize efficiency and, as a result, reduce product oxidation. Moreover, the corking system includes a single head corker designed for stra ...

Used filling monoblock FIMER 24/28 / 6s This wine filler has 24 rinsing clamps, 28 GT filling nozzles and a 6 head Arol corking machine. The machine has recently gone through complete maintenance. It features also a vacuum pump and new water casings. It has 6 different formats to fill different bottles of wine. From 375, 750 and 1500. The rinser stations have a simple system for letting water into the bottle, and use single treatment. The pitch of the used filling monoblock allows the processing of bottles up to 1,5 L, making it very versatile. Specifications: The still wine filler works with slight depression and therefore fills non-carbonated liquids. These can be still wines or non-carbonated soft drinks, juices if their maximum thickness doesn’t exceed about 18%. The capper is a straight cork suitable for the diameter 28 necks. The still wine filler on the underside of the gear ...

Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino  ...

Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...

Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a s ...

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore  ...

Used Bottling Line for still wine 2000 bph The Used Bottling Line for still wine 2000 bph processes still wine in glass bottles and handles formats of 0.375 L, 0.75 L, and 1.5 L. The line delivers a performance of 2000 bottles per hour and operates entirely in a clockwise direction. Each machine is designed to ensure precision, compatibility, and reliability when handling still wine in glass containers. Moreover, the configuration supports a continuous and linear bottling process with minimal manual intervention. Microfiltration and feeding unit The process begins with a mono screw pump equipped with a microfiltration system, manufactured in 1999. This pump directly feeds the filler and maintains consistent product flow. Specifically, the filtration unit includes three housings, each containing three filter cartridges, in addition to all required connectors. As a result, this module guar ...

Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...

Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line inclu ...

Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforwa ...

Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automa ...

Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC mon ...

Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined  ...

Used complete line for still wine - 8000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for reliable beverage production and downstream industrial packaging at up to 8,000 bph. The configuration integrates an MBF filling monoblock (2002) composed of a rinser, filler, and capper, specifically designed for straight cork (flush-to-mouth) application. The line further features a ROBINO & GALANDRINO POKER Z 6/8 (2002) capsuling and shrink-wrapping machine, followed by APE Impianti case handling and KOSME labeling technology. This setup offers robust performance for second-hand applications and flexible format management typical of glass and PET bottle operations.Production speed: 8,000 bottles per hourFilling Monoblock: MBF (Year 2002) – Rinser, Filler, CapperCapping System: Straight cork (flush-to-mouth / tappo raso)Capsuling/Shrinkage: ROBINO & GALA ...

Used Bottling Line BERTOLASO for still wine and alcoholic beverages 4000 bph 0.75L The BERTOLASO used bottling line for still wine and alcoholic beverages operates at different speeds depending on the bottle size. Firstly, the machine fills 0.75 L bottles at a maximum speed of 4000 bottles per hour (BPH). Additionally, it processes 1.5 L bottles at 3000 BPH. Moreover, for 0.50 L bottles, it reaches 5000 BPH, and for the 0.25 L format, it achieves 8000 BPH. As a result, this flexibility allows the machine to adapt to various production needs. Technical characteristics of containers and filling The line fills glass containers of multiple sizes using the low vacuum filling method. In particular, this method ensures delicate handling of products like still wine and alcoholic beverages by minimizing oxygen exposure during bottling. Consequently, it reduces product oxidation and preserves the  ...

Capacity: 2500 Kg; Lifting height: 4050mm Serial: F14024U00100 Estimated weight: 5500 kg Approximate dimensions: 3400x1250x2900 mm Auction-ID: A7-44996-4

Used SIDEL Bottling Line for Still Water up to 54000 Bottles per Hour Introduction of the Used bottling Line SIDEL for still water up to 54000 bph The used SIDEL bottling line for still water up to 54000 bottles per hour is currently built in 2014 operational and offers high performance. Specifically designed to package still water in 0.5 liter PET bottles, this line meets the needs of large scale production. Moreover, the Sidel water line reaches a production speed of 54000 bottles per hour, thereby optimizing operational efficiency for high quality products. Filling Technology and Bottle Specifications This Sidel water line employs gravity filling technology with light depression, ensuring precise and consistent dosing of the product. Additionally, the bottle neck type is the standard 30. or 25, which is common in the bottling industry. Having operated for a total of 10000 hours, the l ...

Still R70-30T LPG Forklift - 2 Piece duplex mast Auction-ID: A3-43511-17026

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43511-222

Battery in order, charger included, immediate operation. Auction-ID: A3-43511-39028

Forklift still efg 2.5 on 80 volt battery Battery to be checked or replaced Still works but battery is not 100% With battery charger Auction-ID: A3-43511-1002

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43511-221

Without loader equipped with push pull forks hydraulically extendable up to 2500mm Auction-ID: A1-40134-170