134,400 used machines on RESALE, but how to find them? Machine Search
plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.
width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mm cross-section heigth:: 25 - 40 mm feed:: 1 - 999,999,9 mm speed of feed:: 60 m/min cuts max.:: 100 - 120 Schnitte/m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: ...
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0 bore depth: 10000 mm number of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mm swing diameter over bed slide: 1600 mm boring diameter: 50 - 310 mm centre height: 800 mm speeds:: 2,5 - 400 total power requirement: 74 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg
machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg
clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg
machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,450 t dimensions of the machine ca.: 3830 x 1160 x 1180 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 24mm total power requirement: 45+22 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg
Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 32 mm -Guide carriage: 90 mm movable -Dimensions: 400/235/H200 mm -Weight: 33 kg
machine stairs, machine access, machine platform -Machine platform: solid design -Platform: length 1950 mm with cutout 530 x 410 mm -Height: 520 mm -Dimensions total: 1950/1310/H520 mm -Weight: 105 kg
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 35mm total power requirement: 45+22 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 40mm total power requirement: 2x37+30 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6085 x 2630 x 2787mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 50mm total power requirement: 45+45 kW weight of the machine ca.: 72 t dimensions of the machine ca.: 6370 x 3240 x 3660mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm
maximum number of results exceeded
please refine your search
