138,027 used machines on RESALE, but how to find them? Machine Search
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B
NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg
x-travel: 1700 mm y-travel: 400 mm z-travel: 400 mm Control: Siemens 480 D table width: 500 mm table length: 2000 mm total power requirement: 16,25 kW weight of the machine ca.: 4750 kg dimensions of the machine ca.: 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410
NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg
x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Langguth E 36 XPSP Labeler Labeler for self-adhesive labels, self-adhesive labels Dispensing via vacuum plate mobile on wheels Very good condition, straight from production!
Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.
SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.
Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected
The machine is in good technical condition; testing is possible by prior arrangement. • Fanuc iSeries • Cast-iron bed with 30° slant, linear rolling guideways • Machine weight: 3900 kg • X/Z/Y axis travels: 205/560/105 (±52.5) mm • C-axis travel (spindle rotation): ±360° • X/Y/Z axis rapid traverse: 30/10/36 m/min • Spindle: ASA A2-6 spindle nose, standard hydraulic 3-jaw chuck (210 mm / 8" diameter), max. spindle speed: 4500 rpm, spindle motor power (S1 continuous/S3 60%/S3 25%): 11/11/15 kW • Draw tube inner diameter: 68 mm • Automatic tool change: tool turret capacity: 12 (24) stations, live tool stations: 12, live tool speed (infinitely variable): 6000 rpm • Max. swing over bed: 600 mm • Max. swing over carriage: 400 mm • Max. turning diameter: 300 mm • Max. bar turning diameter: 65 mm • Parts catcher with conveyor • Bar puller • Manual work ...
Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T
FIXED BED MILLING MACHINE "CORREA" FEATURES: Dimensions • Table dimensions: 2,000 x 630 mm • Number of T-slots: 6 • T-slot dimensions: 18 mm Axis Travels • Longitudinal travel X: 1,800 mm • Cross travel Y: 800 mm • Vertical Z Travel: 800 mm Head • Head model: Manual universal • Tool clamping: Hydraulic • Taper: ISO 50 • Speed range: 25 – 3,250 rpm • Mandrel power: 16 Kw Machine feeds • Working progress: 5 - 5,000 mm/min • Fast feeds: 8,000 mm/min Weights and dimensions • Max. weight on table: 3,000 kg • Approx. machine weight: 10,000 kg • Machine dimensions: 4,920 x 2,714 x 2,417 mm
SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V
Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)
The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter 280 mm; Max. turning length 550 mm; Swing over bed 570 mm; X / Z travel 241 / 640 mm; Y-axis travel ±50 mm (total 100 mm); X / Z rapid traverse 30 / 30 m/min; Bar capacity 61 mm; Spindle interface A6; Max. spindle speed 4,700 rpm; Spindle power S1 / S6 (40%) 20.9 / 27 kW; Torque S1 / S6 200 / 257 Nm; Turret 12 positions, VDI 40; Driven tools: Yes; Driven tool speed 4,000 rpm; Driven tool power 8 kW; Driven tool torque 40 Nm; Tailstock: Yes, Morse 5; Max. workpiece weight 350 kg at max. 1,000 rpm; Dimensions L × W × H 3,875 × 2,122 × 2,345 mm; Machine weight approx. 7,700 kg.
Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t
I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipped with cooling substructure DVK 2 wire feeder Auction-ID: A1-50251-32
Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...
Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain
ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > ...
M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller
Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.
Gas bottle not included Auction-ID: A1-50251-285
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader
Grinding wheel dimensions: Ø300 x Ø50 x 76 mm, Height to be rectified: 500 mm, Surface to be rectified: 600 x 300 mm, Grinding head motor power: 5.5 HP, Weight approx.: 2.000 Kg
forklift available Auction-ID: A1-47446-49
1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m
Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 bph Ma-No. K071-438 Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 BPH Ma-No. K071-438
maximum number of results exceeded
please refine your search
500 € 
