134,823 used machines on RESALE, but how to find them? Machine Search
This 3-axis HARTFORD Infinity HSA-2215AD gantry milling machine was manufactured in 2007. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 780 mm. The machine includes a robust table size of 2,200 x 1,400 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the HARTFORD Infinity HSA-2215AD machine we have for sale. Contact us for further details.
This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details.
SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...
A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards
With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot
Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks
This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.
CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details.
UV curing machine The product is a system designed for curing silicone. Due to the UV curing, the machine can probably also be used elsewhere. Manufacturer: Hereaus Curing: UV curing Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of construction: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 engine Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details.
Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2002 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.
O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CNC ...
Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.
Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2003 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.
Herma H400 Semi automatic wrap labeller Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph
TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.
working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
Double cone kneader Werner & Pfleiderer DK 150
Migatronic PI 200 DC HP TIG/TIG Welding Machine The PI 200 DC HP is an easy-to-use 200 TIG inverter for welding steel and stainless steel and others, materials that can be welded with direct current (DC), with pulse function. MMA welding is also possible with the device. TIG-A-Tack™ - Synergy Plus HF (ignition with HF) LIFTIG® (ignition without HF) Current range 5-200 A Duty cycle 100 %/20 °C (TIG) 170 A | 160 A Duty cycle 60 %/20 °C (TIG) 200 A. Mains voltage 230 V Synergy Plus: Synergy Plus is a special pulse function for TIG DC welding, in which the machine dynamically controls all higher-level pulse parameters. TIG-A-Tack®: With the TIG-A-Tack® function, you can create extremely small and precise tack welds on stainless steel without forming gas. They significantly reduce the risk of weakening the metal's anti-corrosion properties or its shape and strength. ...
Key data: 520 , 9
L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE
Alzmetall AB 35 HST / Box Column Drill & Walter Gras Arbo3 Interchangeable Head -Drilling capacity / steel approx. 40mm -Drilling capacity / casting approx. 45mm -Threading max. M25 -Spindle holder MK 4 -Spindle stroke 180mm -Speed range (INFINITELY VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feeds 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed display -Right/counterclockwise rotation -Swivel drill head with tools -Height-adjustable work table by hand crank -Coolant device -Emergency / Off -Work light Dimensions: LxWxH 1x0.8x2.1 meters / Weight approx. 1200KG
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters
Sales due to lack of space LSM500 Turnkey complete system built in 2021 - PC+touch screen - Including labeling software - Compact free-standing booth laser protection class 1 - Viewing window with laser protective glass - Manual access door with safety switch - Light indicators "Laser in operation" - Key switch to activate the laser - Electric height adjustment (tap mode) - Pilot laser - High life expectancy - High beam quality - Gray value labeling - Barcode scanner can be connected - With connector for extraction - Clamping surface with T-slot plate - USB port Technical data: - Labeling field approx. 100 x 100 mm - Laser power pulsed 20 W - Wavelength 1060~1085 nm - Polarization Random - Single pulse energy 20kHz 1.0 mJ 20kHz - Beam quality
Reference Num.: 4462 Brand: Ryobi Type: RMGT 970PF-8 Construction year: 2025 Impressions: 8 mio Available: directly Status: In production Location: Europa Printing units: 8
A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.
A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible.
-extendable spiral kneader Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left rotation -Stainless steel spiral and guide rod -with 2 stainless steel boilers -per boiler for max. 100kg flour or for max. 160kg dough -Boiler manual locking
ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...
A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.
bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...
Dough pre-portioner Kemper Relexer - SK -Dough pre-portioner Relexer SK -with high conveyor belt -Year of construction 2004 -32 Amp. -400 Volt 50Hz 3Ph
The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.
Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph
Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400
Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg
Technical details Type: Portable straight-knife fabric cutting machines Quantity: 6 units Application: - Garment manufacturing - Textile production - Upholstery fabrication - Multi-layer fabric cutting - Pattern cutting operations Kuris KVS 700 – Unit 1 - Manufacturer: Kuris (Krauss u. Reichert Spezialmaschinenfabrik) - Model: KVS 700 - Serial number: 281680 - Voltage: 220 V - Frequency: 50–60 Hz - Power: 230 W - Speed: 7000 rpm - Made in West Germany Kuris KVS 700 – Unit 2 - Manufacturer: Kuris (Krauss u. Reichert Spezialmaschinenfabrik) - Model: KVS 700 - Serial number: 299493 - Voltage: 220 V - Frequency: 50–60 Hz - Power: 230 W - Speed: 7000 rpm - Made in West Germany Axis Straight-Knife Cutter - Manufacturer: Axis - Made in U.S.A. - Serial number: 18528 - Voltage: 110/220 V - Phase: 1 - Current: 7.4/3.7 A - Power: 0.625 HP (approx. 0. ...
Washing drum, drum sieve used, Diameter approx. 1000 mm, Drum length approx. 2000 mm Mesh spacing approx. 10 mm Stainless steel Drive approx. 0.75 kW Total dimensions approx. 3700 x 1900 x 2500 mm Can be used, for example, to wash vegetables or beets. Changes and errors in the technical data and information excepted.
Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...
Technical details Manufacturer: Dürkopp Adler Type: Industrial post-bed sewing machine Configuration: - Post-bed sewing head - Heavy-duty industrial workstation - Integrated motor drive - Pneumatic foot lift system - Edge guide assembly - Thread stand - Industrial foot pedal - Task lighting - Pneumatic connections Application: - Footwear manufacturing - Shoe upper stitching - Leather goods production - Boots and safety footwear assembly - Bag and luggage manufacturing - Upholstery components - Technical textile sewing Construction: - Post-bed configuration for three-dimensional products - Heavy-duty industrial sewing platform - Continuous production design Dimensions: - Length: Approx. 1200 mm - Width: Approx. 800 mm - Height: Approx. 1550 mm Weight: Approx. 180 kg Condition: Used Observed condition: - Machine head present - Production table and stand i ...
Washing screw stainless steel, screen basket wash screw, drum sieve, blanching drum used, Manufacturer: WOLFF Type: B 1000/3000 Diameter approx. 1000 mm, Drum length approx. 2800 mm partly stainless steel Drive 0.55 kW Total dimensions approx. 4500 x 1800 x 2200 m. Changes and errors in the technical data and information excepted.
Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...
maximum number of results exceeded
please refine your search
1.500 € 
