stephan werke used for sale

Stephan UM5 Universal Machine Machine is in good condition according to its age Two speeds + pulse button 400V Removable boiler with knife insert Plastic sash in the lid at the tip worn, this does not affect the function Video about test run available

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Stephan universal machine, type: UM44, machine number: 713731.01, year of construction: 1999, 380 V, 50 Hz, 5.5/7.5 kW, 1440/2900 U/min, dimensions: 800 mm x 540 mm x 1190 mm.

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.

Mixing and homogenizing plant 60L

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 210 kg,

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm stainless steel

Height=1.19 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 170 kg,

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tool Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube

Stephan UM44 Universal Machine two speeds 1450/2900rpm with knife insert and meat grinder Tiltable for removing the processed medium neat condition, should still be thoroughly cleaned before use Video about test run available

Height=1.29 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 230 kg,

Height=0.7 m, Overall length= 0.35 m, Overall width= 0.5 m,

Height=1.15 m, Overall length= 0.6 m, Overall width= 0.8 m, Net weight= 155 kg,

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,

Height=1.27 m, Overall length= 0.98 m, Overall width= 0.7 m, Net weight= 170 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 205 kg,

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

Height=1.64 m, Overall length= 0.99 m, Overall width= 0.87 m, Net weight= 303 kg,

Height=1.6 m, Overall length= 0.7 m, Overall width= 0.9 m, Net weight= 217 kg,

Height=1.23 m, Overall length= 0.35 m, Overall width= 0.55 m, Net weight= 60 kg,

General SKU350W923 LocationBarneveld MakeStephan TypeUMB40 Main Features MaterialStainless steel Volume40 Ltr. Motor5.5 KW Specified Features - Cutter MaterialStainless steel (Sandvik 1200SA) Cuttercheck Capacity40 l. Diameter500 mm Depth250 mm Knife diameter300 mm Number of knife blades2 Outlet100 mm Can be tiltedcheck Motor5,5 kW, 380 volt, 2870/1420 rpm Speed1420/2870 rpm Information No.25706A Year of construction1976 Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,70 m Total height1,10 m Extra SpecificationsThe vessel is made of stainless steel. : : The blades and lid are made of aluminum. : : CuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU347X812 MakeStephan LocationBarneveld CEcheck TypeUM 60E Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume72 Ltr. Motor0.37 KW Specified Features - Cutter MaterialStainless steel 1.4301 (304) Bowl cuttercheck Capacity72 Ltr. Diameter500 mm Depth360 mm Knife diameter330 mm Number of knife blades2 With scrapercheck With hoppercheck Inletø 150 mm Can be tiltedcheck With jacketcheck 7,5 Ltr. Max. temperature95 °C Motor0,37 kW, 220—240/389—415 V, 1380 rpm Speed31 rpm Information No.732849 Year of construction2008 Mounted on framecheck With switchcheck Floorspace0,90x0,65 m Total height1,80 m Weight200 kgCuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU436X1380 LocationBarneveld CEcheck MakeStephan Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume58 Ltr. Motor7.5 KW Inlet diameter70 mm Specified Features - Cutter MaterialStainless steel 1.4301 (304) Cuttercheck Capacity44 l Diameter500 mm Depth350 mm Knife diameter250 mm Number of knife blades2 With scrapercheck 0,37 kW With hoppercheck Inletø 70 mm Outletø 70 mm With jacketcheck Max. temperature133 °C Motor7,5 kW (400 V) With variable speed drivecheck Speed300—3000 rpm Magento base g_extra_specifications7,5 KW Information TypeUMM/SK 44 E No.728080.01 Year of construction2001 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,20 x 0,75 m Total height2,00 m Weight450 kg Extra Specifications Includes a GEA plate heat exchang ...

Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual

Single envelope tank 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Capacity of the tank : 12 liters , Charge capacity: 2 to 8 liters max

Stephan UM44-S Universal Machine two speeds, 1410 + 2820 rpm + engine brake! Membrane keyboard with impulse switch with knife insert Machine tiltable for removing the processed medium Machine is in good condition and runs neatly and smoothly at both speeds, but should be thoroughly cleaned before use Video about test run available

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

Candle filter of company Seitz-filter-Werke Serial number: 1988 Type: S000-31 H 07 DN 100 Year of construction: 1991

ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -One revolution of the drum corresponds to: 0.5 mm -Interior measuring device -Measuring range: approx. 800 - 1500 mm -Weight: 5 kg

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -Interior measuring device -Measuring range: 25 - 50 mm -Weight: 0.5 kg

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Heat exchanger thermal works 4 pcs. in different Sizes Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg

Welding device, welding robot -Welding device: for plates that are to be welded at an angle -with: travel adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable -without: inert gas welding device