step used for sale

General SKU436X1380 LocationBarneveld CEcheck MakeStephan Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume58 Ltr. Motor7.5 KW Inlet diameter70 mm Specified Features - Cutter Cuttercheck Capacity44 l Diameter500 mm Depth350 mm Knife diameter250 mm Number of knife blades2 With scraper0,37 kW With hoppercheck Inletø 70 mm Outletø 70 mm With jacketcheck Max. temperature133 °C Motor7,5 kW (400 V) With variable speed drivecheck Speed300—3000 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General TypeUMM/SK 44 E No.728080.01 Year of construction2001 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace2,20 x 0,75 m Total height2,00 m Weight450 kg Extra SpecificationsIncludes a GEA plate heat exchanger (volume: 1.8 L: pressure rating: 10 ...

Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual

Single envelope tank, 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Tank capacity : 12 litres , Charge capacity: 2 to 8 litres max , Capacity of the tank : 12 liters

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Stephan UM44-S Universal Machine two speeds, 1410 + 2820 rpm + engine brake! Membrane keyboard with impulse switch with knife insert Machine tiltable for removing the processed medium Machine is in good condition and runs neatly and smoothly at both speeds, but should be thoroughly cleaned before use Video about test run available

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 31 rpm -Power: 0.37 kW -1x Type: FZOD044S -3x Type: FZOD71N13-4 -Design: B14 -Shaft diameter: 25 mm -Protection class: IP 33 -Number: 2x geared motors available Price: per piece -Dimensions: 380/170/H120 mm -Weight: 15 kg

adjustable gear motor, electric motor, three-phase motor -Motor type: FNDeA34s -Gearbox type: 2V4M -Speeds: 11-98 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 320/105/H165 mm -Weight: 6.9 kg/piece

Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

General SKU269Y417 MakeStephan LocationBarneveld CEcheck TypeTK 160 Main Features MaterialStainless steel Volume150 Ltr. Motor24 KW Specified Features - Cutter Cuttercheck Capacity30—100 l. (150 l.) Diameter680 mm Depth425 mm Knife diameter350 mm Number of knife blades3 With scraper2,2 kW, 380 V, 1400/21 rpm Inlet250 x 250 mm Outlet330 x 280 mm Motor15/24 kW, 380 V, 750/1500 rpm Speed26 rpm Capacity800 kg/h MaterialStainless steel With jacketcheck General No.723.579 Year of construction1997 Mounted on framecheck With switch(as is) With switchgear(as is) Floorspace2,18 x 1,50 m Total height1,58 m Weight1130 kgCuttersNew arrivalsStephanMills > CuttersNew arrivalsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...

Height=0.78 m, Overall length= 0.97 m, Overall width= 1.43 m, Net weight= 223 kg,

With possibility to add vacuumpump., Bowl: 44 litres, Capacity: max 30 litres, Knives: 3 speeds on knives, max 3000 RPM, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 550 x 800 x 1200 mm, Weight: 150 kg

Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...

Stephan UMC 12 Cutter – Complete set with temperature control unit, vacuum pump & water separator, ready for immediate use Key data: Manufacturer: Stephan (A. Stephan u. Söhne GmbH, Hameln) Type: UMC 12 Masch.-Nr.: 719.908.01 Year of Make: 1993 Bowl capacity: 12 litres Motor: 1.5 / 1.9 kW, two speeds 1,400 / 2,800 rpm Connection: 380 V, 50 Hz, IP 54 Made in Germany Description: A fully functional Stephan UMC 12 is offered as a temperature-controlled complete vacuum system for mixing, crushing, emulsifying and thermizing under vacuum. Working under vacuum ensures bubble-free, homogeneous emulsions and creams without air entrapment and protects oxidation-sensitive products – ideal for laboratories, pilot plants, food development as well as cosmetic and pharmaceutical applications. The machine is currently fully operational and can be demonstrated on site. Bowl, lid an ...

Flott SB M3 ST Pillar Drilling Machine. 3-speed 380V motor, runs smoothly. Spindle speeds are steplessly adjustable via the variable speed drive. Speeds adjustable from 200 to 2000 RPM. MK3 spindle taper. Quick stroke: 120 mm Drilling depth is adjustable. Table: 400 x 320 mm Table height is adjustable. Includes Röhm 3 to 16 mm drill chuck. Includes vise. Spindle guard. Emergency stop switch. Made in Germany. Machine is in good, well-maintained condition. Overall dimensions: 60 x 40 x 182 cm

Stephan UMC12 Universal machine with frequency converter in the control cabinet and thus infinitely variable speed 150-3000rpm. With double jacket and stainless steel lid with feed tap. Digital temperature display, sensor integrated in the boiler Can be tempered by means of a water bath on the customer's side and can also be operated under vacuum by means of a vacuum pump (both not included). Video about test run available

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tools Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control Panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Stephan UM/SK 150 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 1x cutting blade, maximum working pressure in the bowl -1 / 0,8 bar, maximum temperature in the bowl 110 °C, vacuum connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,5 kW - n1: 1.410 rpm - n2: 25 rpm), 2 manual tightening clamp,hydralic cylinder for easy opening the lid, tiltable for emptying the bowl (no pneumatic outlet valve). Main motor for the cutting knife, integrated vacuumpump and a stainless steel control panel with Siemens S5 PLC and Siemens operation panel. Several spare parts included., Type of ...

The Stephan UM 60 (E) is a universal mixing machine or a universal cutter for processing a wide variety of foods., It combines cutting, mixing, emulsifying and homogenizing in a single working process., Machines of this model series are frequently used in meat processing, delicatessen production, dairy industry, and by producers of convenience products., Typical applications include sausage meat, cream cheese, processed cheese, hummus, mayonnaise, dressings, dips, vegetable preparations and plant-based foods., Thanks to the two speed levels (750 and 1,500 rpm), the machine is suitable for both coarse shredding and fine emulsification of delicate products., Equipped with the classic two-wing, coarsely toothed Stephan cutting knife.

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Item number 68450-0101 Karte Step Motor PT8/10 Alu o. PE Stepper Motor Driver for Tetra Pak PT 8, PT 10 (pull tab applicator)

Step regulator, electronic control -Manufacturer: ELREHA -Type: STG-1903 -Type: STG1903 -Number: 2x control cards available -Price: per piece -Dimensions: 70/195/H130 mm -Weight: 0.9 kg

Stepper motor control BERGER LAHR / SIG POSITEC TLC 411 F ( TLC411F ) 63441100001 230 V New ! Dimensions: 220 x 100 x 160 mm

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Manufacturer: SP, Step clamps, clamping range 100 - 220 mm -T-slot nuts: mm -Quantity: 3 pieces -Price: per piece -Dimensions: 130/70/H245 mm -Weight: 3.3 kg/piece

Hybrid stepper motor with brake and encoder BAUTZ L32RFD-BSN-NN001 Holding torque: 4.8 NM Current bipolar: 6 A shaft: Ø 10 mm New ! Dimensions: 170 x 86 x 86 mm

Step switch, Commander, Quickstepper, Pneumatic control -Manufacturer: Festo, stepping switch Commander type FSSC-12 orig -Pressure range: 2 - 6 bar -Dimensions cardboard: 100/100/H90 mm -Weight: 0.3 kg

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 2 pieces -Clamping width: 50 mm -Price/Delivery: complete -Dimensions: 120/60/H140 mm -Weight: 1.9 kg/piece

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 4 pieces -Clamping width: 50 mm -Bore: Ø 30 mm -Price/Delivery: complete -Dimensions: 100/60/H45 mm -Weight: 1.0 kg/piece

Hybrid Stepper Motor with Brake NEAR L33RFE-B2N-NN-00 Holding Torque: 7.6 NM Current Bipolar: 9.8 A Shaft: Ø 10 mm New ! Dimensions: 200 x 86 mm

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, safety step, perforated sheet step -Grating step: safety step perforated sheet step hot-dip galvanized -Type: ID 600x200x45 mm -Number: 6x grates available -Price: per piece -Weight: 3.3 kg/piece

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Stepper motor MEZ NACHOD, ZSE PRAHA type Z42RS145 1.88 Nm 1.8 degrees/step 7.0 A 830 Hz flange: 95 x 95 mm shaft: Ø 8 / 9 mm New !' Dimensions: 180 x 95 x 120 mm

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

Stepper gear motor FIBRO FIBROTOR Type: EM.05.0500.0.111.02.0.0.0 360° rotatable in 180° steps used, tested ! Dimensions: 580 x 570 x 220 mm

Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks

Step claws Clamping height 180 to 255 mm T - groove width 12 mm 2 pieces total price Weight approx. 4.5 kg