step used for sale

Stephan UMB40 Universal Machine with two speeds 1420/2870 rpm Use of knives as well as additional work Machine tiltable for removing the processed medium Stainless steel bowl Power lever and engine cover should be repainted

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 150 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 33 -Dimensions: 660/260/H300 mm -Weight: 74 kg

Stephan UM5 Universal Machine Machine is in good condition according to its age two speeds + pulse button 400V Removable boiler with knife insert The plastic wings in the lid and the knife insert have probably run into each other and scratched more often, but this does not affect the function Video about test run available

height: 820 mm work height max.: ca. 2250 mm weight: 2,6 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 51 rpm -Power: 0.25 kW -Design: B14 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Dimensions: 580/250/H200 mm -Weight: 35 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 450/230/H180 mm -Weight: 18 kg

Stephan UM25 Universal Machine two speeds 1440/2900 rpm Knife insert (blades are to be sharpened) Stainless steel boiler with double jacket (electrically heated, but without function) Machine tiltable for removing the processed medium Machine in very good condition Video about test run available

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches Machine must be thoroughly cleaned before use. the frame and the engine cover should possibly get a new paint neat and smooth running Viedo available via test run

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 154 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 1x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 57 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 122 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 3x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 63 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Specifications: Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW in each case rotational speed via potentiometer To be set from approx. 100 – 2,300 rpm 3 preset speeds or 3 switching stages

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.

Stephan UM5 Universal Machine Machine is in good condition according to its age Two speeds + pulse button 400V Removable boiler with knife insert Plastic sash in the lid at the tip worn, this does not affect the function Video about test run available

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece -Weight: 25 kg/piece

Stephan universal machine, type: UM44, machine number: 713731.01, year of construction: 1999, 380 V, 50 Hz, 5.5/7.5 kW, 1440/2900 U/min, dimensions: 800 mm x 540 mm x 1190 mm.

Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm

SPEED GOVERNOR RS - 12470914

STEP-TRIGGERING CARD RS - 12404591

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Mixing and homogenizing plant 60L

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 210 kg,

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Height=1.19 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 170 kg,

Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.

Height=1.29 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 230 kg,

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm stainless steel

Height=0.7 m, Overall length= 0.35 m, Overall width= 0.5 m,

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tool Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube

Stephan UM44 Universal Machine two speeds 1450/2900rpm with knife insert and meat grinder Tiltable for removing the processed medium neat condition, should still be thoroughly cleaned before use Video about test run available

Height=1.15 m, Overall length= 0.6 m, Overall width= 0.8 m, Net weight= 155 kg,

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,

Height=1.27 m, Overall length= 0.98 m, Overall width= 0.7 m, Net weight= 170 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 205 kg,

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,