129,267 used machines on RESALE, but how to find them? Machine Search
: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
8 grids: LxW: 1490x800mm. Mesh 3cm. Auction-ID: A1-43573-59
Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Steel fabricated trolley with plastic pallet Auction-ID: A1-45187-195
Steel fabricated work bench with vice, 1600mm x 1000mm Auction-ID: A1-45187-232
21 steel fabricated factory trolleys. Auction-ID: A1-45187-176
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 Rhymes steel external silos Ø 2,800 mm Content 51m³ = 30 tons of flour per silo Height per silo 12,500 mm Silos stand on frame for sale Price on request Phone +49 172 8345457
Steel fabricated welding bench with vice, 1500mm x 1000mm Auction-ID: A1-45187-230
Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm
Steel fabricated measuring table with Mitutoyo DLO and trolley. ANR 307. Auction-ID: A1-45187-127
Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg
Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm
Steel pipes, flushing pipes -Diameter: 1010 mm -Wall thickness: 10 mm -Length 4,800 mm -Weight: 253.5 kg/m
Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m
Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Support length: 80 mm -Clamping height: up to approx. 15 mm -Dimensions: 80/33/H90 mm -Weight: 0.6 kg
Steel pipes, flushing pipes -Diameter: 1070 mm -Wall thickness: 15 mm -Length: 4,350 mm -Weight: 403.2 kg / m
Steel pipes, flushing pipes -Diameter: 810 mm -Wall thickness: 25 mm -Length: 4,800 mm -Weight: 508.7 kg/m² -Total weight: 2441 kg
Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm
Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg
Steel holder, clamping plate with T-slot -Holder: 36 - 39 x 18 x 75 mm -Dimensions: 145/135/H170 mm -Weight: 4 kg
Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg
Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg
Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)
Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm
Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar
Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM
Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)
S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...
Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -Steel rope with: loops -Length: 4 m -Rope diameter: 12 mm -Price: per piece -Number: 1 pieces -Weight: 2.15 kg/piece
Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg
Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.
maximum number of results exceeded
please refine your search
100 € 
