steel wire used for sale

- tank is empty - dented - including conduit to first valve, without other piping - dimensions approx. H430xØ200cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-6

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 5 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-28

Equipped with: Big Green Egg Medium, Two burners, Corten steel outdoor fireplace, Retta Massive Small Front gas fireplace, Corten steel wood storage, Garden Divider with firewood. New price 20.000€ Auction-ID: A1-50621-40

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-9

- tank is empty - including conduit to first coupling, without other piping - dimensions approx. H400xØ210cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-10

RETSCH Stainless Steel Test Screen 400x65mm - 2.5mm; ; New equipment in its original packaging; ; Reference: 60.166.002500; Frame Material: Stainless Steel; Quantity: 1/box; For use with (Equipment): AS 450 Vibration Agitator; Height (metric): 65mm; External (metric) diameter: 400mm; Porosity: 2.5mm; ; Internal reference: FA-1710; Auction-ID: A1-50994-1169

Stainless steel filter Manufacturer: unknown Dimensions (mm): 200 x 150 Height (mm): 500 Inner Diameter (mm): 100 Auction-ID: A1-50994-74

set of 6 stainless steel clamps for stirring platform - 300 ml Erlenmeyer flask; ; For orbital lab shaker/back and forth; New equipment in its original packaging; ; Internal reference: FA-1690; Auction-ID: A1-50994-1058

- tank is empty - dented - including conduit to first valve, without other piping - dimensions approx. H430xØ200cm - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-7

Standard Compatibility: Generic system with rosettes, dimensions perfectly compatible with market standards (Layher, Altrad, etc.). Like New Condition: Robust galvanized steel material, used only once. Coherent and \"Turnkey\" lot: The lot is calculated to the millimeter to be assembled in one piece (4 floors entirely decked in steel along the entire length). LOT DETAILS: Quantity: 80 – Jack-Sockets (Feet) 380 – 2 m vertical uprights (posts) 30 – 1 m vertical uprights (posts) 296 – Steel floors, dimensions: 32 × 257 cm 8 – Hatch trays with ladder, length: 257 cm 312 – Steel beams, length: 257 cm 160 – Steel stringers, length: 73 cm 30 – Steel diagonals for 2.57 m spans Auction-ID: A1-50671-22

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 11 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 2 trailers; Lot is loaded with a forklift for free Auction-ID: A1-41460-1

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 6 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-27

Technical description brewing installation – 550 litres Complete professional stainless steel brewing installation with a net boiling capacity of 550 liters. The installation is fully manual, without PLC or electronic process automation. Composition of the installation: 1. Hot water boiler – 300 liters - Stainless steel, single-walled and not insulated - Propane heating - Equipped with pump for the rinse water 2. Mash kettle – up to 600 litres net - Stainless steel, double-walled and insulated - Propane heating - Mash is transferred to the lauter tun with a pump 3. Filter tun - Stainless steel, double-walled and insulated - Perforated filter bottom - Large manhole at the front for removal of spent grains - Spray ball for rinsing with hot water from the hot water boiler 4. Boiling kettle – 550 liters net - Stainless steel, double-walled and insulated - Propane heating -  ...

free span; trusses c.o.h. 4000mm; roof slope 15 degrees; 2 sets of intermediate trusses IPE160; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-18

consisting of: - Fiorini PHE K260 plate heat exchanger, year of construction 2005, s/n 051005S11892 - Rhoss ICAEB chiller - 3 stainless steel buffer tanks, with Siemens geared motor and control box with touch panel, all mounted on stainless steel frame - Lewa DA9 dosing device - Stainless steel heating tank, equipped with Fati electric heater, with stainless steel control box, mounted on stainless steel frame - Includes 7 different stainless steel liquid pumps - Complete with piping, gauges, valves up to the large stainless steel tanks - Includes 3 shut-off stations - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-12

Stock number: D1231, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1150 x W 1100 x H 3000 mm, Emptying height: 2000 mm, Other: With chain drive - Fork grip for Vemag waggon - Max 300 kg

Stock number: D1246, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1050 x W 1100 x H 3000 mm, Lifting height: Max 2500 mm, Other: With chain drive - Excl. fork grip - Max 300 kg