129,243 used machines on RESALE, but how to find them? Machine Search
with 5 stations Punching diameter: 40 x 8/22x 15 mm Projection: 165 mm 1-cylinder machine with footswitch with lighting Stop: 1000 mm Projection: 165 mm Punching diameter: 40 x 8/22 x 15 mm Blade length: 300 mm Notching: 50 x 90 x 70 mm Total power requirement: 3.7 kW Colour: blue/beige Angle steel: 75 x 75 x 6 mm Flat steel: 300 x 10 mm Square steel: 25 x 25 mm Round steel: D 30 mm Punching pressure: 45 t Dimensions: 1050 x 760 x 1490 mm Weight :840 kg
Landing height approximately: 1400 mm Auction-ID: A1-41275-290
Punching capacity: ø 18x14 mm, (diameter and thickness): ø 50x5 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate/min. (20 mm stroke): 41 Max. hole diameter: ø 160x2 Motor power: 3.7 kW Punching force: 35 ton Weight: 1200 kg
for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)
Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89
Stainless Steel Control Cabinets 3 - Door 6 fans each galvanized base plates empty
used with BMB machines, ø 420 mm, height 620 mm Auction-ID: A1-43992-263
Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
Includes 25 center clamps and screws Auction-ID: A1-44832-843
used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call
Auction-ID: A1-44832-842
Auction-ID: A1-44832-813
One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm
The scaffolding is dismantled and placed on 6 pallets Auction-ID: 04E-TP9-2
Included: Pallet Auction-ID: A1-45495-385
Stock number: D1216, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 750 x W 450 x H 900 mm., Legs: 4 pcs. with wheels, Drain shelf: 1 pc.
One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm
Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price
Stainless steel shelf rollable, shelf mobile made of VA (mobile shelf) Auction-ID: A7-45677-106
Stainless Steel Double Sink with 2 Drains and Backsplash Auction-ID: A7-45677-56
Stainless steel shelf rollable, shelf mobile made of VA (mobile shelf) Auction-ID: A7-45677-105
max. container dia: 2800 mm Height: 1500 mm 0: 7825 l with stirrer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Steel fabricated trolley with plastic pallet Auction-ID: A1-45187-195
Steel fabricated work bench with vice, 1600mm x 1000mm Auction-ID: A1-45187-232
21 steel fabricated factory trolleys. Auction-ID: A1-45187-176
maximum number of results exceeded
please refine your search
10 € 
