steel tank used for sale

50 litre, Stock number: T183, Litre: 50, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tiltable boiler, Standing: Mounted in rack, Top: Open, Double jacket: Yes, Motor: 10 kw - 380 Volt, Inner diameter: Ø 390 mm., Total height: 850 mm., Other: Electrical heating in bottom

850 litre, Stock number: T1676, Litre: 850, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 7 pcs., Item: Vat, Standing: 4 pcs. legs, Top: Open with strengthening ring, Agitator: Yes, Motor: Yes, Inner dimensions: W 925 x L 1100 mm., Dimensions: W 1050 x L 1220 x H 1380 mm., Other: Outlet in the bottom

15.000 litre, Stock number: T1579, Cheese vat, stainless steel,, closed, standing on legs., Double jacket., Insulated., Outside fully welded stainless cladding., Double-acting framed agitator from the top., Alfa Laval, Ø 2900 mm., Litre: 15.000, Material: Stainless steel AISI 304

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials

Measuring and marking plate cast steel-grey cast iron strongly ribbedwith mounting bracket made of steel, 565 mm highYear of construction approx. 1985Length: 1200 mmWidth: 800 mmThickness: 35/150 mmWorking height: 1030 mmWeight approx. 550 kgwith metal basevery good surface; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 100 mmWorking height: 745 mmPlate thickness: 40 mm throughout- stable metal substructureWeight: approx. 800 kgGood condition; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedheavyheavy: straightening plateLength 1600 mmwidth: 1005 mmThickness: 280 mmPlate thickness approx. 85 mm, continuous- Center hole 245 mm, 400/800 mm - Tapped holes M 20, approx. 55 mm deep- Through-holes 27 mmWeight: approx. 2.5 to.Good conditionFormer press table - presumably worked on both sides; used

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYERfrom a measuring or marking machine with hand-held measuring armMasch. No. 8530979 Year of construction approx. 1989Length 3000 mmWidth 1500 mmThickness 360 mmWorking height 690 mmPanel thickness 70 mm continuous - laterally worked at a 90 angle area 3000 x 360 mm- 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mmSpace requirement L x W x H 3000 x 2000 x 2500

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Clamping plate with T-slots made of cast steel-grey cast ironBase plate of radial drilling machineAssembly table, assembly station, base plate for column-slewing craneLength 1850 mmWidth 915 mmPlate thickness 230 mmTable surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm- Milled top side parallel to the underside = clamping surface- Milled underside also the bars lie flat and support- Ideal as a base plateDead weight 1140 kggood condition; used

Straightening and welding plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1380 mmThickness 74 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight approx. 2380 kg; used

Straightening and welded plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1580 mmThickness 94 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight 3400 kg; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 1600 mmWidth 1000 mmThickness 210 mmPanel thickness approx. 32 mm throughoutTable height / working height 565 mm- very stable steel table substructure (self-made)- plate with substructure can be moved by pallet truckWeight 740 kggood condition; used

Straightening and welding plate Cast steel-Grey cast iron heavily ribbedCast plate, heavy straightening plateLength 1500 mmWidth 1000 mmThickness 100 mmPanel thickness approx. 37 mm continuousTable height 860 mm- Table base made of steel (self-made)Weight 640 kgGood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

General SKU293X398 LocationBarneveld MakeThermo Scientific TypeHy Performa Year of construction2003 Main Features MaterialStainless steel/Polypropylene Volume250 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel Stainless Steel Reactors Reactorcheck Capacity250 + 50 l. With jacketcheck Open stirring vesselcheck Capacity250 + 50 l. Information CEcheck With switchgearcheck Extra SpecificationsWith Thermo Scientific bioreactor, volume 250 l., (2003), 2x single use bioreactors, volume 50 l., (2001), : control system, : Mettler Toledo floor scale, load cap. 600 kg, e=0,2 kg, : disposable bags, 200 and 50 l. spare parts, 13x plastic mix drums with 5x mobile frames, : Lauda, temperature unit, type T1200, : Pall, manual filter press, type Stax, (2013) Quantities of single-use bags: 650l total 6 pieces 350l total 29 pieces 200l total 23 pieces 50l ...

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm

1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

The brand manufacturer COBRA-SOR ceased its activities in 2019 We have products for the following brands: VW, Mercedes, Ford, Nissan, Madzda, Mitsubishi, Opel, Renault, Fiat, Skoda, Toyota, Hyundai, Chevrolet, Citroen, Honda, Isuzu, Jeep, Kia, Audi, Peugeot, Seat Under abc s : / / thor-automotive . en/ you will find all the articles that our sister company has posted. We are currently making another precise, up-to-date inventory. List price for all together was € 1.3+ million net. The export price at that time was about € 650,000 We imagine € 250,000 FCA 21614 Buxtehude (thus approx. 19% of the retail list price) We would charge an additional €33,000 net for the 269 shelf crates/foldable tire pallets in which the goods are currently stored. You can receive a ready-to-use merchandise management system based on "Odoo V16 Enterprise" from us free of charge. All p ...

56 litre, Stock number: R457, Litre: 56, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Standing: 3 pcs. legs, Top: Open with 2 pcs. hinged lid, Double jacket: Yes, Agitator: Yes, Agitator type: Frame agitator, Agitator placement: In the top, Motor: 0,55-0,75 kW - 380 Volt - 80 rpm., Inner diameter: Ø 600 mm.

Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Galvanized steel hall, kits for screwing Dimensions approx. : 12 m long 2.5 m wide 2.27 m Height Front 2.57m height rear Completely clad including sheet metal and fire door Shipping surcharge available VAT can be declared Price : Net 3.361,34 + 638,65 ( 19 % VAT) = 3.999,99 Euro gross

Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

170 litre, Stock number: T4021, Litre: 170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper, Standing: On a wagon with wheels, Top: Open with lid, Bottom: Conical, Outlet pump: Ø 2, Inner diameter: Ø 615 mm., Dimensions: L 700 x W 620 x H 810 mm., Total height: 1120 mm., Motor: 1,5 kW - 220/380 Volt - 408 rpm., Manufacturer: L. Brandstrup, Other: With pump

170 litre, Stock number: T3530, Litre: 170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper, Standing: On a wagon with wheels, Top: Open with lid, Bottom: Conical, Outlet pump: Ø 2, Inner diameter: Ø 615 mm., Dimensions: L 700 x W 620 x H 810 mm., Total height: 1120 mm., Motor: 1,5 kW - 220/380 Volt - 408 rpm., Manufacturer: L. Brandstrup, Other: With pump

Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026

400 litre, Stock number: R1233, Litre: 400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Standing: In a stand, tiltable, Double jacket: For heating/cooling, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator type: Anchor with scrape - Colloid mill from top with variable slot width, Agitator placement: From the top, Working temperature: 100/140 °C, Working pressure tank: 98 % vacuum, Working pressure double jacket: 3 bar, Inner diameter: Ø 840 mm., Outer diameter: D 960 mm., Dimensions: L 2200 x W 1550 x H 2950 mm., Manufacturer: Fryma, Model: VME 400, Year: 1979, Other: Excl. control cabinet - With hydraulic lift

General SKU279X361 MakeFluitec LocationBarneveld CEcheck TypeFluitec Mixer CSE-XD/6 DN350/PN40: Type Q-L Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume537 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity537 l. Vessel sizesø 355 mm OutletDN40 Max. temperature0 / 220 °C Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.5482.1.1 Year of construction2016 Floorspace6,360 x 0,75 m Total height0,75 m Weight887,5 kg Extra SpecificationsDesign code: PED 97/23/EGStainless Steel ReactorsNew arrivalsFluitecReactors > Stainless Steel ReactorsNew arrivalsBrand > Fluitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Stock number: F1057, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube filling machine, Construction: Manual, Chamber: 3300 ml., Filling head: Ø 28 mm.

Stock number: F619, Liter: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg rack with 4 pcs. of wheels, Conveyor: In the bottom, W 300 x L 750 mm.

Stock number: F679, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Stock number: F713, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Flow rate meter, Standing: On a rack, Manufacturer: Fischer & Porter

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

750 litre, Stock number: T1267, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Standing: 4 pcs. wheels, Top: Open, Dimensions: L 1500 x W 1000 x H 500 mm.

350 litre, Stock number: T1354, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Trough, Lying: On legs, Dimensions: L 4080 x W 400 x H 450 mm., Other: With wall mountings

250 litre, Stock number: T1517, Litre: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Trolley, Standing: On 4 pcs. of rubber wheels, Top: Open, Dimensions: L 1040 x W 620 x H 960 mm., Other: Handle at the top