128,439 used machines on RESALE, but how to find them? Machine Search
Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.
Qty. 1 Second-hand automatic saw socket production line Mfc.: ADIGE SYS Type: BC 80 Built: 2022 The BC80 is a high-productivity vertical rotary transfer machine that allows you to cut and chamfer tubes and solid bars. Its main features include: fully automatic operation; separate management of scrap and chips; protection for fragile tubes; centralized adjustment for diameter changes; and a simple and intuitive graphical interface. The BC80 is the highest-performing and most efficient solution on the market for the continuous, 24/7 production of bushings up to 80 mm in diameter and from 10 to 350 mm in length. The BC80 can produce up to 2200 parts per hour, cut to length, chamfered, and inspected from a tube or solid bar. Round tube cutting capacity: min. 10 mm (0.4") - max 80 mm (3.15") Bar cutting capacity: 60 mm (2.4") Workpiece length: min. 10 mm - max. 350 mm Loader l ...
ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
Key data: 45 °, 3200 mm
Format Saw Robland Type: Z 3200 Year of construction: 90s Swivel format saw with scoring Diameter saw blade 400 x 30 mm Max. cutting height 125 mm Tilt adjustment 0 – 45° Max. cutting height at 45° 100 mm Saw blade speeds: 3000/4000/5000 rpm. Motor 5.5 kW Scoring diameter 100 x 20 mm Cutting height scoring 0 – 4.5 mm Inclined adjustment of scoring 0 – 45° Speed scoring 7000 rpm. Table size 1530 x 700 mm Table height 840 mm Dimensions of rolling table 400 x 3200 mm Cutting length 3200 mm Cutting width to the right of the saw blade 1380 mm Suction nozzle diameter 120 mm Net weight 1150 kg Packaging dimensions 2270 x 1330 x 1020 mm + 3250 x 450 x 200 mm
Key data: 5300 mm, 2200 mm
Panel Saw Striebig Type: Standard III TRK 6220 A Year of Build 2.98 T Cutting dimension 5300 mm x H vertical 2220 mm / H horizontal 2100 mm Motor power 4.4 kW Cutting depth maximum 80 mm Saw blade diameter 300 mm, min. 290 mm Saw blade bore 30 mm Saw blade speed 4,750 rpm. With center support rail Support rollers with locking mechanism Evasive slatted frame For wall mounting Good, ready-to-use condition Dimensions set-up: L 6665 mm x W 1426 mm x H 3015 mm Weight approx. 950 kg
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
TECHNICAL DATA: Table dimensions: 1100 x 760 mm Tilting table Diameter of the flywheels: Ø 800 mm Saw blade length: max. 5650 mm / min. 5550 mm Installed power: 5.5 hp
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm
Key data: 350 mm
TECHNICAL DATA: Saw blade: Ø 350 mm Installed power: 2.2 kW Voltage: 380 V Table length: 3200 mm Equipped with extraction system
TECHNICAL DATA: Carpet width: 320 mm Spindle: Ø 70 mm Saw blade: Ø max. 350 mm Processing height: max. 120 mm Electric height adjustment Feed with 2 speeds (0.6 kW) Installed power: 30 kW EQUIPMENT: 1 cabinet with tools
Key data: 45 °, 2800 mm, 800 mm
Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued. ...
max. working pressure: 6 bar, with extraction system, type: LAS-A-X10, automatic stop, treadmill in front, aluminium frame tray and frame labelling unit, Fabr. EBS, type: 6200P, built in 2014 with digital display
with pre- and attached roller raceway and frame shelf
Key data: 4400 mm, 75 mm
TECHNICAL DATA: Cutting length: 4400 mm Slide stroke: 4300 mm Saw blade protrusion: 90 mm Usable cutting height: 75 mm Saw blade: Ø 330 mm Equipped with scorer: 1.25 kW Main motor: 7.5 hp Control: GVision 2009 06 Collets Collet opening: 115 mm EQUIPPED WITH: 04 Air curtain tables (AIR flow) 01 Fan
Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg
Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W 4200 x H 16 ...
1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm
An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.
Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.
Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station
Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Key data: 230 mm
suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece
Casolin sliding table machine mod. Used Astra DGT with digital parallel guide control Carriage mm 3200 with sliding on 8 rollers Blade diameter max mm. 400 Engraver with independent motor and electro-pneumatic start-up intervention Maximum opening parallel guide mm 1300 with controlled axis Automatic star/delta blade motor start Installed power 4.5 Kw Possibility of removing the parallel guide by unscrewing a single knob Parallelogram protection rotation for passage of tall workpieces Year of manufacture 2004 CE compliant
Key data: 45 °, 3000 mm, 1100 mm
MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg
Pull, cross-cut and mitre saw FESTOOL KS 120 EB year 2011, blade ø 260/30 mm, S/N 10763964, 1,600 W, w. 2 roller raceways metal, each approx. 160x45 cm, roller block
Vertical panel saw HOLZ-HER 1270 Automatic built in 1987, machine no. 262/8-75, machine width approx. 500x210h cm
Wooden band saw HOLZMANN HBS 470, S/N 11105Q0055, passage width approx. 47 cm, passage height approx. 35 cm, table dimensions approx. 55x55 cm
Mobile circular saw MAFELL Erika 60 E built in 2011, 1,300 W, S/N 0988734
Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464
Sliding table saw ALTENDORF F45 EvoDrive year 2023, blade max. 450 mm, 7,208 kVA 400 V, S/N 230112016, digital display, control ALTENDORF, double mitre gauge Altendorf Duplex
A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Cutting stroke 500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-15
Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg
saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export
Excellent condition - Fully operational - Loading / Transport possible! hood for miter cuts, 2cnd longitudinal fence and hold-down
Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.
Excellent condition - Fully operational - Loading / Transport possible! Cutting length approx. 3200 mm, program slide travel max. approx. 2500 mm, with 5 stops, angular back fixture, cutting height approx. 50 mm, diameter main saw blade approx. 300 mm, scoring saw blade approx. 150 mm, motor main saw 5,5 kW, scoring saw 0,55 kW, saw carriage feed approx. 6 to 32 m/min, return approx. 32 m/min, slide approx. 0,8 m/min and 14 m/min, control TRIA 460, 3 air cushion tables approx. 1830 x 610 mm, length stop at the 1. air cushion table.
Excellent condition - Fully operational - Loading / Transport possible! saw blade diameter max 500 mm speeds 2000 to 6000 1/min cutting length 5,000 mm guide slot width of the riving knife 13 mm voltage 400 V current 35 A frequency 50 Hz main motor make ATB type YAF 112 M/21-11 power 5.5 kW digital length stop scoring saw saw blade diameter 120 mm diameter of the tool holder 22 mm scoring motor make ATB type MAF 80/2 A-11 power 0.75 kW , 8200 1/min includes vacuum table and 2 pcs. Laser splitting wedge Altendorf 3 pcs insertion protection Altendorf Leitz throat milling disc
Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.
Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile
Excellent condition - Fully operational - Loading / Transport possible! cutting length: 4300 mm cutting depth: 4250 mm Saw Blade Protection: 80 mm clamps piece: 6 (75 / 275 / 475 / 1050 / 1850 / 3450) piece Main saw blade: 350 mm Scoring Saw Blade: 180 mm saw carriage speed forward: 1 - 150 m/min saw carriage speed reverse: 150 m/min program fence speed forward: 90 (EU max 25) m/min Program Fence Speed Reverse: 90 m/min Air table: 4 x (2240 x 770 mm) Main motor: 13.5 kW scoring saw: 2.2 kW control: PLC software: CADMATIC 4.1 PROFESSIONAL total power approx: 20 KW
maximum number of results exceeded
please refine your search
2.000 € 
