steel saw used for sale

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

600 W

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See pictures Condition: unchecked (6)

Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5)

Stored in working condition, CNC controlled. Saw blade 400mm. The buyer must provide his own transport. Elevator available to charge it.

including key; 2 sharpened saw blades

Powerful and particularly robust metal band saw with mAlu die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Without machine base ! Cutting range at 90 degrees: around 172 mm Cutting range at 90 degrees: square 170 mm Cutting area at 90 degrees: rectangle 170 x 170 Saw blade dimensions 2035 x 20 x 0.9 mm Dimensions L x W x H 430 x 960 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.5 kW Machine weight approx. 38 kg Condition: never used / new (5)

Key data: 300 mm

SPECIFICATIONS: Saw blade diameter mm: 300 Bore mm: 30 Max. material thickness at 45?: 60 mm Installed power: 3.0 KW Revolutions: 3000 rpm Max. cutting width mm: 600 Complete with 2 roller tables of 3500 mm and 1500 mm with electronic positioning stop 2 Pneumatic stops

Working condition

tested; Operating

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Miter band saw Cutting diameter 170 mm Saw blade dimensions 2080 x 20 x 0.9 mm Table height 880 mm Cutting speed 40 + 80 m/min Cutting capacity at 90° Round 170 mm Cutting capacity at 45° Round 125 mm Cutting area at 90 degrees: rectangle 150 x 190 mm Cutting area at 45 degrees: rectangle 95 x 120 mm Total power requirement 1.1 kW Machine weight approx. 0.24 t Dimensions LxWxH 870 x 1,550 x 1700 mm Condition: never used / new (5)

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

unused

Cold circular saw - Mitre 45 degrees on one side Saw blade diameter 300 mm Cutting diameter 100 mm Saw blade speeds 40 / 80 rpm Cutting range at 90 degrees: square 90 mm Cutting range at 90 degrees: around 100 mm Total power requirement 1.5 kW Machine weight approx. 0.4 t

Mounting band saw: Cutting range at 90 degrees: around 125 mm Cutting range at 90 degrees: square 125 mm Cutting area at 90 degrees: rectangle 127 x 125 mm Saw blade dimensions 1435 x 12.7 x 0.6 mm Belt speed 38 - 80 m/min Total power requirement 0.95 kW Machine weight approx. 18 kg Dimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5)

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment

Demonstration machine Machine for cutting tubes and profiles made of steel, light metal, plastic, non-ferrous metal and composites. Saw blade diameter 355 mm Cutting range at 90 degrees: around 115 mm Cutting area at 90 degrees: square 120 x 106 mm Cutting area at 90 degrees: flat 102 x 197 mm Saw blade holder diameter 25.4 mm Connection voltage 230 V Total power requirement 2.3 kW Machine weight approx. 28 kg Dimensions LxWxH 0.6 x 0.35 x 0.45 m Condition: never used / new (5)

Saw blade 315mm Cutting diameter 105mm Motor 1.5KW Mitre 45°/60° Speed 17/35m/min See pictures

VERTICAL BAND SAWING MACHINE Inv. No. 12.895Z1 Make MÖSSNER Model SSF520 Wheel diameter 520 mm Table dimensions 750 x 800 mm Throad dept 510 mm Passage under upper guide 380 mm Cutting speeds Variables 18-160/240-2280 m/min Motor power 5.5 KW Net weight 1000 kg Max. thickness for fusion cutting 15 mm Including: Coolant Mushroom shaped emergency stop

Miter Band Saw - Semi-automatic - Double mitre - Material detection during lowering - Incl. 7 saw blades Cutting diameter 260 mm Saw blade length 3340 x 27 x 0.9 mm Cutting range at 90 degrees: square 260 mm Cutting range at 90 degrees: flat 380 x 260 mm Belt speed 37 / 74 m/min Saw motor 1.5 kW Machine weight approx. 0.62 t Dimensions approx. 1.7 x 1.4 x 1.3 m

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Band saw with - Ideal welding machine - Belt sander - Table tiltable -15° to +45° - Pneumatic height adjustment Roll diameter 400 mm Projection 900 mm Workpiece height 400 mm Table size 700 x 660 mm Saw blade length 4630 mm Speed 45 - 500 m/min Saw belt width max. mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Dimensions LxWxH 1.95 x 0.9 x 2.25 0

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Machine number: 01882 Cutting length: 300 mm incl. roller conveyor Roller conveyor width: 380 mm Roller conveyor length: 4000 mm

Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new

Manual cold circular saw with: - Machine base - Support rail 1500mm Saw blade diameter 275 mm Cutting range at 90 degrees: around 80 mm Cutting range at 90 degrees: square 70 mm Cutting area at 90 degrees: flat 100 x 60 mm Cutting range at 45 degrees: around 70 mm Cutting range at 45 degrees: square 60 mm Cutting area at 60 degrees: flat 80 x 50 mm Clamping range 110 mm Speed 45 / 90 rpm Total power requirement 0.5 kW Machine weight approx. 0.07 t Space requirements approx. 900 x 700 x 1600 m

Including model 9312S, 9312, 9430.

Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

Stored in working condition with water cooling. The buyer must provide his own transport. Elevator available to charge it.

Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg

measuring length 7500 mm