126,612 used machines on RESALE, but how to find them? Machine Search
2.000 litre, Stock number: D244, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: On legs, Top: Open, Double jacket: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator placement: In the top from brigde, Other: Cheese sieve
General SKULT0103 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity120 l. (150 l.) Vessel sizesø 492 x 672 mm Dished bottomcheck Dished top sidecheck OutletG1 With jacketcheck 21 l. Max. temperature2 / 95 °C With propellor stirrercheck Magnetic ZETA, Type BMRT 50 W EX S Dk Motorcheck 0,12kW 230/400 V 900 rpm (Ex) Speed mixing shaft125—860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 Information TypeSolvent Tank Year of construction2021 Mounted on legsmobile skid With switchcheck With switchgearcheck Total height± 1,3 m Extra SpecificationsThe tank is equipped with a pressure gaug ...
New 5.000 litre tank,, stainless steel AISI 304,, closed top, standing on 3 pc. legs., Conical top and bottom 15°,, tank cover in the top Ø 450 mm., Ø 1” pipe in the top centre,, Ø 4” pipe in the top,, Ø 2” pipe in the bottom centre., The tank is made of pickled plate type B2., All weldings on the inside grinded grain 60., All weldings on the outside sandblasted., Tank dimension Ø 2000 x cylinder 1500 mm., Density: 1,0., Working temperature: 0 - +50°C., Working pressure: None, Scope of application: A, Litre: 5.000, Material: Stainless steel AISI 304
Stock number: F872, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rinser, Standing: In stainless cabinet with safety shield, Construction: Carousel type, Stations: 9 pcs., Capacity: 3600 bottles/hour, Manufacturer: Promec Evolution, Type: 15+1A.3.9.251, Year: 2007
GT-5374 Two Stainless Steel Bathtubs - Stainless steel - For 2.85 meter pipe each tub
Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C
75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk
Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk
Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
Stainless steel vacuum vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C , down two outlets DN50, mounted on stainless steel frame 1220x1020mm total height 2800mm
Diessel stainless steel vessel 170 Ltr. with propeller stirrer and heating for oil phase, works on atmospheric pressure, on wheels, down outlet diameter 26mm
VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"
ARSILAC Stainless Steel Vessel 1000 Ltr. CUVE INOX 304
ATEC 1220 Ltr stainless steel vessel with anchor stirrer with scrapers (5,5kw), jacket 250 Ltr, two heaters (2x7,5kw), inlet/outlet DN50, for atmospheric pressure, control cabinet, speed controlled stirrer, on wheels
500 litre, Stock number: T4031, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Tank cover: Half hinged lid, Agitator: Yes, 2 pcs., Agitator type: Anchor with scrape and propeller, Agitator placement: From the top, Motor Anchor: 0,55 kW - 230/400 Volt - 25 rpm., Motor Propeller: 1,5 kW - 220/380 Volt - 925 rpm., Inner diameter: Ø 800 mm., Outer diameter: D 920 mm., Total height: H 2000 mm., Manufacturer: Kofa, Year: 1998
1.500 litre, Stock number: T4016, Litre: 1.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 5 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 400 mm., Inner diameter: Ø 1100 mm., Total height: H 2280 mm.
Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...
Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg
Hanging cabinet HS 1000 with sliding door Used device cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH with intermediate floor
900 litre, Stock number: T4035, Litre: 900, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a flat bottom, Top: Open top, Inner diameter: Ø 950 mm., Total height: H 1280 mm.
Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm., Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm., Manufacturer: M. S. Packaging, Type: FLR 1000, Year: 1999
Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty
Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Oval manhole - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Connection for ventilation
Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation
Dimensions: - Width: 1500 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation
300 litre, Stock number: T4029, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open top with lid, Bottom: Plain sloping, Inner diameter: Ø 625 mm., Total height: H 1200 mm., Manufacturer: Jahala Rustfrit stål, Model/type: JBT-300
500 litre, Stock number: T4032, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Tank cover: Half hinged lid, Agitator: Yes, 2 pcs., Agitator type: Anchor with scrape and propeller, Agitator placement: From the top, Motor Anchor: 0,55 kW - 230/400 Volt - 56 rpm., Motor Propeller: 1,1 kW - 220/380 Volt - 1080 rpm., Inner diameter: Ø 800 mm., Outer diameter: D 920 mm., Total height: H 2000 mm., Manufacturer: Kofa
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg
Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material
Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg
Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal
Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick change boring bar holder: DB 2004 -Recording dimensions: see photos -Clamping diameter: 55 mm -Clamping length: 220 mm -Dimensions: 220/140/H130 mm -Weight: 9.2 kg
Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick-change turning tool holder: DB 2001 -Recording dimensions: see photos -Clamping height: 60 mm -Support length: 220 mm -Number: 2x holders available -Price: per piece -Dimensions: 220/95/H180 mm -Weight: 9.3 kg/piece
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box made of: stainless steel -Stuffing box for: Ø 38 mm shaft -for: gland tape -Price: per piece -Number: 8 pieces -Dimension: Ø 101 x 45 mm -Weight: 1 kg
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 50 mm -Transport roller width: 265 mm -Total length: 310 mm -Socket: Ø 14 mm -Wrench size: 12 mm -Number: 30 rolls available -Price: per piece -Weight: 0.9 kg/piece
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 60-62 mm shaft -for gland tape -Number: 19x glands available -Price: per piece -Dimensions: 147/147/H70 mm -Weight: 2.8 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 40 mm shaft -for gland tape -Number: 3x glands available -Price: per piece -Dimensions: 145/145/H66 mm -Weight: 3.1 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape -Number: 8x glands available -Price: per piece -Dimensions: 144/144/H68 mm -Weight: 2.9 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 95 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 180/180/H82 mm -Weight: 6.6 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 90 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 175/175/H80 mm -Weight: 6 kg
Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 110 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 205/205/H84 mm -Weight: 8.5 kg
maximum number of results exceeded
please refine your search
