steel rolling used for sale

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Key data: 340 mm, 700 mm

available 27" Mill Description Attached!

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Key data: 305 mm, 550 mm

available 22" Mill Decription attached!

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers - roller diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit: NEW - Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock - Stainless steel roller container for holding the mixture - bi-directional safety belly bars - Safety brake for NOT stop - ...

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

ORT RP18B overhauled

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 100 kN, Ø Pieces: 2mm min; 40mm max, Passed: 3.5mm max, Grooving step: 1.75mm max, Roller width: 70mm, Ø roller: 80mm min; 120mm max, Speed of roller shafts: 32 51 95 150 rpm, Ø roller bearing shaft: 40 standard, Wheelbase: 80mm min; 165mm max, Work career: 7 min, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 3 Kw, Electrical power consumed: 4.68 Kw, Tank capacity: 80 L, Weight approx.: 750 Kg

Lamination pressure: 220 kN, Ø Parts: 3mm min; 75mm max, Passed: 6mm max, Grooved pass: 2.25mm max, Roller width: 160mm max, Ø roller: 145mm min; 200mm max, Roller shaft speed: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 130mm min; 200mm max, Working travel: 15min max, Advance: from 0.5mm/s to 6mm/s, Rolling time: from 0.1s to 100s, Pause time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Capacity deposit: 130 L, Weight approx.: 2100 Kg

Lamination pressure: 220 kN, Ø Parts: 3mm min; 75mm max, Passed: 6mm max, Grooved pass: 2.25mm max, Roller width: 160mm max, Ø roller: 145mm min; 200mm max, Roller shaft speed: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 130mm min; 200mm max, Working travel: 15min max, Advance: from 0.5mm/s to 6mm/s, Rolling time: from 0.1s to 100s, Pause time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Capacity deposit: 130 L, Weight approx.: 2100 Kg

Auction-ID: A1-51285-299

Laminating pressure: 160 kN, Ø Pieces: 3mm min; 50mm max, Passed: 5.5mm max, Grooving step: 2mm max, Roller width: 100mm max, Ø roller: 133mm min; 165mm max, Speed of roller shafts: 32 40 51 59 81 95 118 150 rpm, Ø roller bearing shaft: 54mm standard; 69.85mm special, Wheelbase: 135mm min; 205mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, Inclination of roller-carrying axes: +/- 5º, main engine: 5.5 Kw, Electrical power consumed: 7 Kw, Tank capacity: 130 L, Weight approx.: 1700 Kg

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Trolley, trolley STEEL used, tested ! Dimensions: 330 x 240 x 250 mm

Trolley, trolley PAGUS used, tested ! Dimensions: 340 x 240 x 250 mm

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-32

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-76

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-77

Rollable version, with height adjustment Auction-ID: A7-51473-5

Rollable version, with height adjustment Auction-ID: A7-51473-15

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-30

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-33

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-56

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-4

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-75

weight:22 t

Key data: 200 mm, 500 mm

Rolling mill in very good condition. Used. Without CE.

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Sendzimir, completely revamped by IS2 Type: ZR23-25 Built: No information! Completely rebuilt: 2000 Stopped: 09/2022, still under power Strip width: 280 – 625 mm Thickness: Entry: 3.5 mm Exit: 0.05 mm Speed: 1st gear: 0 – 165 m/min. 2nd gear: 0 – 280 m/min. PLC GE FANUC – IC697CPX782

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Cefla, Type: Beizlinie, Year: 2005, Work piece width min-max mm: 100 - 1300, Min.-max. workpiece length in mm: 3 - 80, Min.-max. workpiece height in mm: 300 - 2010, Working widht max mm: 5, Working width min min mm: yes, Apstapelanlage Typ: no, Cycle rate: yes, Type of stacking system: Bürste D2/1300-15, Conveyour system: yes, Fast exchange system spray gun carrier: Rotostain RT 10, Laquer circles: yes, Laquer system - airless: VS/26-2C, Laquer system - airmix: brush sander, Water cleaning: FEV EU2/7-TT 12850, Working widht mm: Band, Year :2005

Manufacturer: Cefla Sorbini DMC, Year: ca. 1990, Work piece width min-max mm: 1300, Abstapelanlage Typ: no, Roller coater line: yes, Sanding machines (number): 2, Design sanding machine no 1: Quer Längs Längs, Stain rollers qty.: 2, Laquer roller coaters (number): 2, 2 UV lamps qty.: 1, UV dryers - 3 lamps (number): 2, Year :ca. 1990

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Superfici mit Hochtrockner, Type: Twinspray, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: Rakel, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 5, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, Dry exhauster: yes, Belt conveyors (number): 2, High dryers (number): 24/5500 mm, Length of pallets mm: 5500, Feedin speed m/min: 3-5, Year :2001