132,018 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg
GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC ar ...
GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...
Shaft grinding, polishing, milling machine Specifications: - Speeds 850 to 12000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive 380 V / 1.0 hp - Space requirement approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
Lathe Centauro Copy lathe Type: T 2 Model: C 140/4 Clamping length 1400 mm Center height 250 mm automatic feed infinitely adjustable feed rate 0 – 1.5 m/min. Spindle speed adjustable via belt Speeds: 900 / 1200 / 1500 / 1800 / 2400 / 3000 rpm. 2 knife holders with bezel with workpiece holder for long workpieces 2 molded steel holders 3 x 3 jaw chuck with a lot of tools Dimensions 3000 mm x 580 mm x H 1260 mm Weight approx. 650 kg
A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible.
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...
CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...
Granulator - Shini SG-2324-CE (2 pcs.) Year of Make: 2010 Location: Lodz, Poland Description: Slow-speed granulator with gearbox, with cyclones and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
7-axis turn/milling machine Bumotec S192 – with fully automatic LNS chip conveyor and integrated mud pump Oil cooler Axle cooler Milling spindle 30000 revolutions/min. Breuning Short Bar Loader Elbaron Suction Includes 2 rotary holders and 3 drill holders with HSK 40A adapter Includes 2 collets Counter spindle can be used with 2 jaw chuck or collet E173
Multi-speed machine with flexible shaft BIAX type MB 4-2Masch. No. 9/50/55 Year of construction approx. 1970Length of the flexible shaft: 2 metersSpeed: 900 - 9000 rpm. infinitely variableMotor speed: 3000 rpm. Motor power: 1.2 kW = 1.5 HPerg connection: 380 volts, 50 Hz- handle straight grinder with collet 6 mm- swivel and rotatable foot transport trolley with 2 drawersOverall dimensions: 850 x 550 x 1100Weight: approx. 80 kggood conditionUniversal for milling, grinding and polishing work; used
Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Key data: 600 mm, 400 mm, 420 mm
Hermle UWF 900 Universal CNC Milling Machine BAZ Year of Make: 1996 Machine number: 11410 Machine weight: 2,900 kg Availability: By arrangement. Machine is still energized and in perfect condition.
Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none
Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used
Slot head for milling machine, milling head, CCCP / USSR STANKO Type 1502Nr: 200 Year of construction 1974Stroke size: max. 60 mmStroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plateHole spacing machine-flange plate: 245 x 185 mmMounting hole: 17 mmCentering diameter on the machine flange plate: 190 mm- Stroke size adjustable via eccentric adjustment- The drive is as with the normal vertical head from the machine gearbox- Drive via driver, centric in the centering diameter- Degree scaling at the
Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling
1 gebr. CNC Milling Machine, Fabr. TOS, Type FNG 63 Travel: X 800 mm Y 500 mm Z 630 mm Heidenhain Control
Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over
Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used
CNC Mill, Cover, FP4-AT, 3 Axis X560/Y500/Z450 Speed range 40-4000 min-1 Control Contur-3, Mounting SK-40, weight approx. 3.4 t.
Tool milling machine Manufacturer: INFRATIREA, Type: FUS-32, built in 1988 Specifications: Table 950 x 450 mm Travel X / Y / Z: 500 / 320 / 400 mm Spindle speeds 25 - 2000 rpm with digital display
OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold
Heckert CWK 400 Built in 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool Changer Rotary table 400 x 500 mm, Conveyor Weight 12.5 t.
Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with
Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4Masch. No. 341020 Year of construction 1998Travel distances X: 400 mm Y: 320 mm Z: 400 mmTable size 650 x 350 mmSpindle holder SK 40Spindle speed 40 - 2500 rpm. Feeds X, Y and Z axis 0 - 1000 mm/min. infinitely variableRapid traverse X, Y axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Quill adjustment vertical 60 mmDrive power Spindle motor 3 KWnet connection 400 volts, 50 Hz- CNC line control Heidenhain TNC 124- Spindle speed via 2 gear stages and
gebr. V. Processing Center, Fabr. Homa, Type Ecocenter V350 x-travel 450 mm y-travel 350 mm z-travel 350 mm Table size 650 x 350 mm Speed 6000 rpm Control Fanuc 0M
Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF
Argo A51, built in 2008 Travel Distances X 510 mm, Y 350 mm, Z 300 mm Table: approx. 600 × 300 mm Control: FANUC Dimensions 2,610 × 1,720 × 2,460 mm. Weight: ≈ 2,700 kg.
Fanuc ROBODRILL ALFA T10 B, Built in 1995 Revolutions 8000 rpm Picture Sk 30 Control Fanuc 16 M Tool changer 10-fold
A CNC 4-axis wet processing machine (dental milling machine) vhf of the first generation is available. Axes: 4, speed: 60000rpm, max. block dimensions X/Y/Z: 45mm/20mm/20mm, repeat accuracy: +/-3µm, axis of rotation: 200°, materials: glass ceramic/zirconium/composite/titanium/CoCr. Machine dimensions X/Y/Z: approx. 365mm/460mm/475mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.
Travel: x=1600mm Y=800mm Z=900mm Spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of the z axis present but defective.
CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post
A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.
CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik
Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools
Specifications: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Wheel spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Tool holder inside ISO No. 50 DIN 2079 Tool holder outside ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds infinitely variable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step Jump 1:2 Constant power range 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x direction infinitely variable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y- and z- direction infinitely variable from 20-500 mm/min. Rapid traverse for y- and z-axis 1,00 ...
A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.
Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg
Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.
Various accessories for a Bridgeport milling machine according to photo 3 jaws Chucks, face plates, milling cutters, collets and much more.
Pear 1FC4 Tool Milling Machine Manufacturer: PEAR Model: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine HP: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!
x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC Heidenhain Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of T-slots 7 Centering bore 30H7 mm Number of tool locations 16 pos. Tool holder ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6.0 kg max. total weight 50 kg Feed speed max. 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirements approx. 4.0 x 4.0 x 2.5 m
Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
