126,612 used machines on RESALE, but how to find them? Machine Search
750 litre, Stock number: T4019, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Open top with lid, Bottom: Conical, Double jacket: Yes, Tank cover: I side, 420 x 320 mm., Working pressure double jacket: 0,1 MPA, Inner diameter: Ø 1050 mm., Outer diameter: D 1065 mm., Total height: 1450 mm., Year: 2020
Dimensions: approx. L 50.00 m × W 25.00 m × D 5.20 m / F 9.30 m (length x span × eaves height / ridge height) Year of construction: 2012. Roof shape: gable roof, roof pitch 18° degrees. Condition: used with signs of use. Anchoring: Ground Nail Anchoring. Construction & Equipment: Supporting structure: Double-hinged frame IPE 270 (S 355) with FL 80x15 tension strap. Gable frame with additional gable supports (IPE 180 S 235). Roof covering: trapezoidal profile. Facade: Trapezoidal profile. Substructure: Purlins & wall beams made of cold-finished hollow sections. Bracing: Rope diagonals with turnbuckles. 8 roller shutters (approx. 3.00 x 3.00 m). 4 emergency exit doors (approx. 1.00 x 2.00 m). Continuous rooflight on both sides for good daylight conditions. Load assumptions: Snow load: 0.75 kN/m²; Wind load: 0.50 kN/m². Documents: The construction documen ...
160 litre, Stock number: T4018, Litre: 160, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., CIP: Yes, Inner diameter: Ø 500 mm., Outer diameter: D 660 mm., Total height: 1500 mm., Manufacturer: Zybrew, Model/type: Hot water tank, Year: 2019
170 litre, Stock number: T4021, Litre: 170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper, Standing: On a wagon with wheels, Top: Open with lid, Bottom: Conical, Outlet pump: Ø 2, Inner diameter: Ø 615 mm., Dimensions: L 700 x W 620 x H 810 mm., Total height: 1120 mm., Motor: 1,5 kW - 220/380 Volt - 408 rpm., Manufacturer: L. Brandstrup, Other: With pump
170 litre, Stock number: T3530, Litre: 170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hopper, Standing: On a wagon with wheels, Top: Open with lid, Bottom: Conical, Outlet pump: Ø 2, Inner diameter: Ø 615 mm., Dimensions: L 700 x W 620 x H 810 mm., Total height: 1120 mm., Motor: 1,5 kW - 220/380 Volt - 408 rpm., Manufacturer: L. Brandstrup, Other: With pump
Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg
Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage
Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026
400 litre, Stock number: R1233, Litre: 400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Standing: In a stand, tiltable, Double jacket: For heating/cooling, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator type: Anchor with scrape - Colloid mill from top with variable slot width, Agitator placement: From the top, Working temperature: 100/140 °C, Working pressure tank: 98 % vacuum, Working pressure double jacket: 3 bar, Inner diameter: Ø 840 mm., Outer diameter: D 960 mm., Dimensions: L 2200 x W 1550 x H 2950 mm., Manufacturer: Fryma, Model: VME 400, Year: 1979, Other: Excl. control cabinet - With hydraulic lift
Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
12.500 litre, Stock number: T671, Litre: 12.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: In cradles, End bottoms: Conical, Tank cover: In end bottom, Agitator: Flange for agitator in end bottom, CIP: Yes, Inner diameter: Ø 2300 mm., Dimensions: L 2950 mm., Manufacturer: Kolding DDMM
10.000 litre, Stock number: T3967, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: Yes, End bottoms: Conical, Tank cover: In the end, 520 x 390 mm., Inner diameter: Ø 2150 mm., Dimensions: L 3200 x W 2150 x H 2300 mm., Total height: H 2400 mm., Manufacturer: Kolding DDMM, Other: Prepared for agitator
This sterile tank manufactured by KHS is designed for the safe intermediate storage of beverages in aseptic production processes. The tank originates from an industrial beverage processing line and meets high hygienic and technical standards required in the food and beverage industry. Technical Specifications: Manufacturer: KHS Type: Aseptic Buffer Tank Year of Manufacture: 2007 Storage Medium: Beverages Capacity: approx. 18,000 liters Max pressure: 7 bar Minimum pressure: -1 bar Overpressure: 10.5 bar Temperature range: 20-130 degrees centigrade Material in touch with product: stainless steel 306 Design: Aseptic, food-grade, high-acid compatible Key Features & Benefits: Suitable for aseptic beverage processing High product safety and hygiene standards Robust and durable industrial design Ideal as a buffer or intermediate tank in filling and processing line ...
500 litre, Stock number: T2209, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, from the lid in top, Motor: 0,4 kW - 380 Volt - 384 rpm., Working pressure double jacket: Max 0,5 Bar, Inner diameter: Ø 1000 mm., Outer diameter: D 1150 mm., Total height: H 1650 mm., Manufacturer: Kolding DDMM
300 litre, Stock number: T3626, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, CIP: Yes, Inner diameter: Ø 760 mm., Total height: H 1350 mm., Manufacturer: Kolding DDMM, Other: Inspection cover in the top
55 litre, Stock number: R1252, Litre: 55, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Drum mixer, Standing: In stainless cabinet on wheels, Inner diameter: Ø 400 mm., Dimensions: L 650 x W 800 x H 1050 mm., Manufacturer: Spicer, Other: Forward/back function - No safty shielding
3.300 litre, Stock number: T2657, Litre: 3.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Frame agitator from the top with bottom guideway, CIP: Yes, Inner diameter: Ø 1700 mm., Outer diameter: D 1856 mm., Total height: H 3350 mm., Manufacturer: Kolding DDMM
6.500 litre, Stock number: T3981, Litre: 6.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, 500 x 370 mm., Agitator: From top with bottom guideway, Agitator type: Mixing wing, Motor: 1,5 kW - 230/400 Volt - 58,5 o/min., CIP: Yes, 3 pcs., Inner diameter: Ø 1900 mm., Total height: H 3870 mm., Manufacturer: Pasilac, Model/type: MAV
1000 Litre Stainless Steel Second Hand Tank Capacity: 1000L / 220 Gallons / 6 Barrels Vertical Stainless Steel Vessel, with dished top and dished base Free standing on 3-off stainless steel legs with adjustable feet Working pressure 1 Bar Empty weight: 100kg approx. Fittings: 1 x DN40 Top Inlet 1 x 120mm Diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
30.000 litre, Stock number: T2034, Litre: 30.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Lying: For burial, End bottoms: Dished, Outer cladding: Fiberglass coating, Tank cover: In the top, bolted, Ø 500 mm., Inner diameter: Ø 2480 mm. , Total length: L 6800 mm., Manufacturer: Gjettermann & Nielsen, Year: 1980/82
60.000 litre, Stock number: T4010, Litre: 60.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a skirt with bracing and strengthening, Top: Conical, Bottom: Conical, Tank cover: 2 pcs, in the top, Ø 480 mm. and in the side, 430 x 530 mm., Agitator: Prepared for agitator in the side, Inner diameter: Ø 3400 mm., Total height: H 7700 mm., Manufacturer: Kolding DDMM
Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
40BBL/65HL Conditioning tank manufactured by DME Vertical cylindrical single skin tanks for use in a chilled room . Dimensions approx: Diameter 2200mm Overall height 3,700mm Tanks are stamped – Certified by Meuller Originally designed for 15PSI Side entry manway door and C.I.P Arm Working capacity is 40UKBBL/65HL with 11% head space This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
50BBL/80HL conditioning/bright tanks MANUFACTURED BY BRABY YOM 1973 Test pressure 45PSI Working pressure 30PSI Vertical cylindrical single skin tanks . Side entry manway door and C.I.P Arm This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
- Stainless steel - Bag of 4 with 1.2 m centrifuge - 40 hp - Label separator - Double Big bag holder
Vertical Cylindrical Transportable Tanks. Stainless Steel 700L Approx. Insulation, temp probe pocket port, carbonation stone port, sample tap port. Previously used for carbonating beer. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Transportable 1000L Bulk Container Tank Manufacturer: Bison Stainless Steel, Top Entry Manway. Previously used for spirits This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
General SKU279X361 MakeFluitec LocationBarneveld CEcheck TypeFluitec Mixer CSE-XD/6 DN350/PN40: Type Q-L Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume537 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity537 l. Vessel sizesø 355 mm OutletDN40 Max. temperature0 / 220 °C Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.5482.1.1 Year of construction2016 Floorspace6,360 x 0,75 m Total height0,75 m Weight887,5 kg Extra SpecificationsDesign code: PED 97/23/EGStainless Steel ReactorsNew arrivalsFluitecReactors > Stainless Steel ReactorsNew arrivalsBrand > Fluitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
Net capacity: 20,000l, gross capacity: 21,610l, operating temperature: -10 to 100°C, operating overpressure: -0.1 to 0.6bar, material: 1.4571, medium density: 1.3t/m³, height: 4958mm, diameter: 2850mm, empty weight: 2.9t, weight of insulation, platform, access ladder, pipe holder, agitator: 700kg, minimum installation weight: 3.6t. With complete documentation, sale including insulation. An on-site inspection is possible, fully cleaned and ready for operation.
Stock number: F1057, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube filling machine, Construction: Manual, Chamber: 3300 ml., Filling head: Ø 28 mm.
Stock number: F619, Liter: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg rack with 4 pcs. of wheels, Conveyor: In the bottom, W 300 x L 750 mm.
Stock number: F679, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station
Stock number: F713, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Flow rate meter, Standing: On a rack, Manufacturer: Fischer & Porter
Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.
750 litre, Stock number: T1267, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Standing: 4 pcs. wheels, Top: Open, Dimensions: L 1500 x W 1000 x H 500 mm.
350 litre, Stock number: T1354, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Trough, Lying: On legs, Dimensions: L 4080 x W 400 x H 450 mm., Other: With wall mountings
4.900 litre, Stock number: T1341, Litre: 4.900, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On plate, Top: Conical, Inner diameter: Ø 950 mm., Total height: H 7000 mm., Other: 2 pcs. lifting eyes
250 litre, Stock number: T1517, Litre: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Trolley, Standing: On 4 pcs. of rubber wheels, Top: Open, Dimensions: L 1040 x W 620 x H 960 mm., Other: Handle at the top
750 litre, Stock number: T1222, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 4 pcs. legs, Heating coil: In the bottom, Agitator: Yes, CIP: Yes, Dimensions: L 920 x W 820 x H 1020 mm.
650 litre, Stock number: T115, Litre: 650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On flat bottom, Top: Open with strengthening ring, Inner diameter: Ø 1000 mm., Total height: H 870 mm.
1.000 litre, Stock number: T1020, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vat, Lying: In painted rack with wheels, Top: Open with lid, Agitator: From bridge at the top, Dimensions: L 1200 x B 1000 x H 1100 mm.
1.150 litre, Stock number: T1002, Litre: 1.150, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with bolted lid, Double jacket: Chequer, Inner diameter: Ø 1070 mm., Outer diameter: D 1130 mm., Total height: H 1790 mm.
9.000 litre, Stock number: T1235, Litre: 9.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: 2-way frame agitator, Agitator placement: From bridge in the top, Motor: Inner agitator; 1,5 kW - Frame agitator; 2,2 kW, CIP: Yes, 2 pcs., Inner diameter: Ø 2100 mm., Outer diameter: D 2220 mm., Total height: H 4850 mm.
3.000 litre, Stock number: T1266, Litre: 3.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, Agitator: Flange for agitator in the side, CIP: Yes, Inner dimensions: Ø 1900 mm., Total height: H 2050 mm.
maximum number of results exceeded
please refine your search
