steel mill used for sale

Ball valve WHITEY SS-43S8MM 207 bar diameter: 4.7 mm stainless steel ! Dimensions: 65 x 50 x 25 mm

Stainless Steel Welding Wire, MAG Wire Electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.0 mm Coil: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

Stainless Steel Ball Valve, Two-Way Ball Valve FK ZR1543 DN15 PN40 1.4408 V4A ! flange: Ø 94 mm Dimensions: 250 x 130 x 94 mm

Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm

Stainless Steel Filter Press Manufacturer : Seitz Type: 40x40 Technical specifications : Stainless Steel Filter Press 40x40 4 filter plates 2 end plates VA Length 1,200 mm (for 12 plates) Wheel-to-wheel width 720 mm

Filter press stainless steel Manufacturer : Seitz Type: A20 Z Technical specifications : Stainless Steel Filter Press 4x filter plates 2x End Plates

- Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200

900 litre stainless steel container Technical specifications : Metrics: ca. Diameter: 1,000 mm Cylindrical height: 940 mm plus cone 400 mm Height: 1,850 mm Manhole: 400 mm Outlet: DN 80 disc

miscellaneous Different holders with Recordings

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg

Used Skerman (France) stainless steel coating pan. Total volume 500 Liters. Batch load aproximately 200-250 kg. Pan depth 10450 mm, Pan diameter 1200 mm. Unit with drive ready to work. Overall dimentions 1900 mm, 1250 mm, 2100 mm.

Stainless steel pump body + pump impeller, 40-160, Lowara, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery: 1 piece stainless steel pump impeller, SH/FH 40 D171 S2, 150784350, second-hand top, original price € 448 excl. 1 piece stainless steel pump body, CRP SH40-160 DIN-JIS, 151380090, second-hand top, original price € 1025 excl. VAT, pump body, cover motor side, cover suction side + connection. Seals mostly present, screws missing. Bellhousing and pump mounting bracket (blue) free of charge Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the ...

Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.

Standing stainless steel tank with flat bottom Volume: 40,000 L Dimensions: Ø 3.00 × 6.00 m high The tank can be equipped with a new agitator or pump on request. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Spout under the tank with flange Ø 4.5 cm Spout at the bottom Ø 6.5 cm, without tap Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Spout under the tank with flange Ø 4.5 cm Spout at the bottom Ø 6.5 cm, without tap Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6

1000 Pieces / Box 2 boxes in stock

1000 Pieces / Box 4 boxes in stock

Format: 13x33x0.6 mm for plastic belt, galvanised 1000 Pieces / Box 2 boxes in stock

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Dismantled two-aisled hall supporting structure with the reference no. hbs1789f2 (L 41.5 x W 43.1 x H 10.3 m) as a section of an originally three-aisled industrial hall. In the second life cycle, the section of approx. L 41.5 x W 43.1 x H 10.3 m to be sold could be used for the construction of a sorting hall, production/storage hall, workshop with overhead crane, etc. APPROXIMATE DIMENSIONS: Built GFA: approx. 1789 sqm; Hall length: approx. 41.50 m; Longitudinal grid: approx. 10.24 m MM frame supports; Hall width: approx. 43.11 m AK frame supports; Hall width: approx. 21.1 + 21.1 m MM columns; Clear height: approx. 9.37 m UK Frame - Binder; HALL STRUCTURE: Bolted flat roof frame construction made of hot-rolled and primed/painted steel profiles with frame supports made of IPB / HEB 900 and frame trusses made of IPBl / HEA 900. The roof substructure consists of hot- ...

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

Ingredients Silo from Riehle 7 containers of 25 kg each. Hinged lid top and front with viewing window Stainless steel Dimensions: 1380 x 580 x 700 mm, WxDxH Used cleaned We have many great stainless steel appliances in stock for you!

Nerak vertical Z conveyor 2500-750-650-350 Stainless steel food grade RA1961 Make: Nerak Material: Stainless steel food grade Running direction: both directions Vertical transport height: 2500 mm Maximum size of transported material: 750x650x350 mm LxWxH Overall height: 3300 mm scaffold width (NB): 1155 mm Height feet: 150 mm return rollers: 20 pcs. Motor : SEW motor 380-500V Conveying speed: 0,45m/s Scope of delivery: including supports, without side guide, light barriers, terminal box. Optionally available: Frequency converter Features: Length base: 1700 Breite Basis: 1155 Bauhöhe in mm (BH): 3300 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: 2500 Transportgut LxBxH mm: 750x650x350 scope of delivery: including supports, Klemmkasten, Lichtschranken For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be hap ...

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Unused vertical stainless steel tank, capacity: 600 liters. 5 pieces available.

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 35,000 L Dimensions: Ø 2.80 × 6.11 high Dimensions welded stainless steel plate/foundation plate: 3.04 m x 3.04 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 35,000 L Dimensions: Ø 2.80 × 6.11 high Dimensions welded stainless steel plate/foundation plate: 3.04 m x 3.04 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Equipment: - Brown colour - 2 connections aeration / de-aeration DN 40 - Level - Thermometer - Taster - Oval manhole - Partial drain Friedrich n°2 40 - Total drain Friedrich n°2 40 Dimensions : - Depth: 1450 mm - Width : 1100 mm - Height : 2200 mm

Standing steel tanks with inner coating, insulated, standing, with feet can be used, for example, as a buffer tank or as a rainwater tank Volume: 58,000 L Dimensions: Ø 3.20 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Stainless steel tanks Manufacturer Concept Type PH-1-011 Capacity 4200 liters Material V4A in contact with the product Cylindrical stainless steel tank standing on feet Product space: pressure-resistant/vacuum-resistant +3/-1 bar, operating temperature 143 °C Double jacket: pressure-resistant 3 bar, operating temperature 143 °C No agitator

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.

Key data: 45 mm, 130 mm, 13 mm

Punching force: 70 ton Punching capacity: Ø 28 in 20 mm steel Projection: 300 mm Scissors: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flat steel 45 mm round steel Notching: 100 x 13 mm Equipped with: - Electric length stop 1000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 7.5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Batch tumbler mixer with parts in contact with the product in stainless steel (drum made of VA 1.4541), gross volume: 1,000 l., usable volume: 600 l. (max.). Filling and emptying via pneumatic flat slide valves from Jaudt. Including modern control with Siemens CPU, touch panel and frequency converter (created by Gabler in 2020); Drive via SEW gear motor (1.1 / 6.6 kW); Speed infinitely variable from 0 to 29 rpm. The scope of delivery also includes feet that enable a spout height of 1,900 mm.

Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used