steel line used for sale

Measuring and marking plate cast steel cast strongly ribbed with mounting angle 565 mm high Year of construction approx. 1985 Length: 1200 mm Width: 800 mm Thickness: 35 /150 mm Working height: 1030 mm Weight approx. 550 kg with metal base very good surface; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Base made of solid wood Weight approx. 950 kg good surface; used

Straightening and welding plate cast steel strongly ribbed Length 3050 mm Width 2000 mm Thickness 300 mm Plate thickness approx. 55 mm continuous Weight approx. 4.5 ton. good condition; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1600 mm Thickness 110 mm Working height 600 mm Plate thickness 30 mm continuous Weight approx. 1000 kg Good condition, good surface; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 250 mm Working height 820 mm Panel thickness 30 mm Continuous height-adjustable metal base Weight approx. 400 kg Surface rusted; used

Measuring and marking plate cast steel strongly ribbed Length 2000 mm Width 1000 mm Thickness 100 mm Working height 745 mm Plate thickness 40 mm continuous - stable metal substructure Weight approx. 800 kg good condition; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 1000 mm Thickness 230 mm Working height 970 mm Top thickness 38 mm continuous - Metal base Weight 450 kg; used

Straightening and welding plate cast steel strongly ribbed Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm continuous - Center hole 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes 27 mm Weight approx. 2.5 to. good condition Former press table; used

Clamping plate with T-slots made of cast steel cast iron Length 1900 mm Width 1600 mm Thickness 475 mm Plate thickness approx. 130 mm Base area 1800 x 1890 mm- Clamping surface with scrubbed T-slot plate made of steel, thickness 70 mm- T-slots 22 mm, distance = 300 mm - Parallel to the bottom milled top = clamping surface - Milled bottom also the webs lie flat and carry - Very high load possible due to the strong ribbing and the load-bearing processing - Ideal as a press table, comes from a 200 ton press dead weight 4700 kg good condition; used

Measuring and marking plate cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 8530979 Year of construction approx. 1989 Length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm Plate thickness 70 mm continuously - laterally machined at a 90 angle surface 3000 x 360 mm - 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanically and electrically without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm Space requirement L x W x H 3000 x 2000 x 2500 mm Weight approx. 5000 kg very good surface; used

Straightening and welding plate SIEGFRIED WEYRAUCH Gemmingen cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjustment screws for aligning the plate Weight 370 kg good surface; used

Measuring and marking plate cast steel strongly ribbed Length 1000 mm Width 1000 mm Thickness 54/225 mm Working height approx. 800 mm - 4 feet with adjustment screws for aligning the plate Weight 390 kg good surface; used

Tool steel, round material, shaft section shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rolls, measuring tools, guide strips, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength as delivered: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price per piece; used

Straightening and welding plate cast steel cast strongly ribbed Length 1200 mm Width 800 mm Thickness 150 mm Working height 1050 mm Panel thickness approx. 30 mm continuous - simple metal substructure Weight 270 kg good condition; used

Measuring and marking plate cast steel cast strongly ribbed STIEFELMAYER Masch. No. 8530979 Year of construction approx. 1989 Length 5000 mm Width 2000 mm Thickness 350 mm Working height 690 mm Plate thickness 50 mm continuous - 15 pieces height-adjustable feet - very precise and stable longitudinal guides, screwed laterally to the plate Space requirement L x W x H 5000 x 2120 x 400 mm Weight approx. 7500 kg good surface; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1000 mm Thickness 240 mm Working height 850 mm Plate thickness approx. 30 mm continuous - 5 pieces height-adjustable feet Weight approx. 1000 kg good surface; used

4-fold combined profile steel shears PEDDINGHAUS type Peddy Masch. No. GJ 4405 Year of construction 1970 Notching device: rectangular notch 40 x 40 to 7 mm sheet steel Punch dimension 40 x 50 mm - stroke rate 40 strokes/min. - Table support 750 x 260 mm Profile steel shears: Profile shears at 90 angles 70 x 70 x 7 mm Profile shears at 45 angles 50 x 50 x 6 mm Bar steel shears:Cutting capacity round 28 mm Cutting capacity square 25 x 25 mm Flat steel shears: Cutting capacity max. 10 mm cutting capacity flat 80 x 6 mm- blade length 175 mm- usable length 135 mm - shear angle approx. 2 motor power 1.5 kW mains connection 380 volts, 50 Hz. - mechanical stroke tripping - bogie with material support Space requirement L x W x H 1200 x 750 x 1700 mm Weight 500 kg good condition; used

Clamping plate with T-slots made of cast steel cast iron Base plate of radial drilling machine Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm - Top milled parallel to the bottom = clamping surface - Milled bottom also the webs lie flat on and carry- Ideal as base plate Net weight 1140 kg good condition; used

Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - full steel plate - surface milled- 4 pieces screwed trailer blocks Net weight approx. 2380 kg; used

Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - full steel plate - surface milled- 4 pieces screwed hanging blocks Net weight 3400 kg; used

: gebraucht : 2021 : 9648 : prompt, Zwischenverkauf v : Spanien : 15900 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5 kW : 2100 mm : 1400 mm : 1600 mm : 1390 kg DEMO MACHINE with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release User Manual in german + CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DAXNER Silo systems -flour: stainless steel; 3 pcs: 2x 9,000 kg, 1x12,000 kg; steel frame weighing station DAXNER

DAXNER 960 – Ingredient weighing station: collapsible sieve; piping system; dosing funnel eddy current sieve WM5 AA600; switch cabinet

Hefelo silod -flour 4 pcs x 10 tons

Profile steel shears

Stainless steel tank Manufacturer Becker Tankbau Content 14,250 litres Cylindrical stainless steel tank standing on feet, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: unpressurized, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Machine type: Profile steel shears with punching Manufacturer: PEDDINGHAUS Model: 5-fold combined profile steel shears with punching Condition: very good Offer type: used machine Specifications: Achievement: round = Ø 20 mm, flat = 80 x 12 mm Angle steel = 50 x 50 x 6 mm T-steel = 50 x 6 mm Drive type: by hand Note: two machines on a stable, mobile substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be visited and demonstrated by us. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.

upper floor, steel tank with welded consoles and four domes, ideal as rainwater tank can be ordered with inlet and overflow on request with partition wall in the tank (13.5 m³ + 25 m³, total volume: 38.5 m³) Total volume: 38.5 m³ Dimensions: Ø 2.95 m × 6.40 m long Consoles are 30 cm high, so the total height is 3.25 m

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

Specifications: - Flat steel shears cut up to 350 x 6 mm - 200 x 12 mm - Profile steel shears - cuts - L-steel at 90° to 80 x 8 mm - Bar steel shears - cuts - round steel up to 30 mm - Square steel up to 25 mm - punching force 380 KN - radius 175 mm - perforates in steel up to 27 mm Ø in 10 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 500 x H 1280 x D 1000 mm - Weight approx. 900 kg

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 4,020 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25,50 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 3,750 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 22.70 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 3,330 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 21,30 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes welded on. - An INP profile (perforated) attached.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 3,150 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 20,40 kg | Pcs. - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 2,890 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 18,00 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

Measuring and marking plate, measuring table cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 22890285 Year of construction 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm- manually movable with measuring arm , measuring range X=1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - laterally machined area at 90 angle 1500 x 350 mm- 5 pieces height-adjustable feet Space requirement L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface; used

Straightening and welding plate cast steel strongly ribbed Length 1985 mm Width 1000 mm Thickness with ribs 220 mm Working height 860 mm Plate thickness approx. 35 mm continuously - 4 pieces height-adjustable feet Weight 1050 kg; used

Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price

Manufacturer: Stanko Type: H5222A Stock number: 0982 Punching: Ø30 in 16mm Notching: 100 x 12mm Round material: 45 mm Square material: 40 x 40 mm Angle steel: 125 x 125 x 12 mm Dimensions (LxWxH): 2000 x 1400 x 2400 mm Machine weight: 2.35 t

punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of stamps and dies as desired

: neu : ca. 10 Wochen ab Auftrags : Spanien : 24100 € : 1000 mm : 400 mm : 12 m/min : 0,2 mm : 0,1 mm : 300 kg The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat. THE ASSEMBLY CONSISTS OF: Mounting plate. Table assembly with X” and Y” axis driven by servo motors. B&,R Power Panel 500 PC based 15” touch screen control Each axis X” and Y” has servo motors with built encoder for precise measurement. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: The position of the holes to be punched is programmed either in absolute or incremental dimensions. When the control is started up, the guide stops are positioned for first hole. The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles. After the punch has returned ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...

Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for stroke release Quick-change device Assortment of tools is included in the price

Platform scales, platform scales, floor scales made of stainless steel MINEBEA - Sartorius type IFS4-600LL-I Cleanroom scale Fabr. Ref: 379 383 79 Year of construction: 2019 Weighing capacity max. 600 kg section 25-1500 kg / 0.5 kg Platform size 1000 x 1000 mm Platform height approx. 30 mm Mains connection 220 volts, 50 Hz - Completely made of stainless steel 1.4301, suitable for food industry or midizin technology- Display unit, evaluation device CAIS 1 (Fabr. No. 37967266) - Calibration class III- Ramp for driving onto the weighing platform - Rollable via height-adjustable transport rollers Space requirements L x W x H 1250 x 1150 x 90/200 mm Weight 130 kg Transport package 1500 x 1250 x height 500 mm Weight with packaging 170 kg very good condition, as good as new (probably unused); used

Peddimat machining center for section steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of construction: 1993 System consisting of: Longitudinal saw, drilling rig and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of construction: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized mitre adjustment Hydr. Locking mechanism for mitre swivel in the range of 45 / 45° Kneeling Inlet and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling rig Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each incl. internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system incl. measuring discs on the inlet and outlet sides automatic hold-down device each on the feed and discharge side automatic "Z" tower adjustment by DS servo  ...

Kleemann steel link conveyor belt Brand: Kleemann Type: PB 1450 (heavy version) Dim.: A.A. 6000 mm , belt width 1450 mm Propulsion: 30 kW gearbox Weight: 16.5 tons