128,060 used machines on RESALE, but how to find them? Machine Search
Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging
1x package; galvanized unused; 1.5mm thickness; Package thickness 61.5mm
Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
4 tonnes of stacked galvanized steel floor panels used for industrial construction flooring. The panels are neatly arranged on a wooden pallet, ready for installation or transport. These elements are typically used as load-bearing components in mezzanines, factory floors, or elevated platforms, providing strong and durable support for heavy industrial applications. In the background, several large transport crates can be seen inside a warehouse setting. Per panel: LONG- 3M HIGHT- 75MM WIDTH- 0,20M WEIGHT - 18,4KG
Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging
used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm
The Progress Rotary Judge is equipped as follows -5 rotors with directional nozzles 8-16mm D. wire -1 rotor with straightening rollers for 20mm D. wire. - Straightening extension 14m. with row of hooks. -6 pieces of driven reels 5 to. at call
max. container dia: 2800 mm Height: 1500 mm 0: 7825 l with stirrer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1x 65x67x220 cm, floor plate size 100x100 cm, 1x 67x65x246 cm, floor plate size 100x100 cm, 1x 60x70x200 cm, floor plate size 100x80 cm
5 tonnes of stacked galvanized steel floor panels used for industrial construction flooring. The panels are neatly arranged on a wooden pallet, ready for installation or transport. These elements are typically used as load-bearing components in mezzanines, factory floors, or elevated platforms, providing strong and durable support for heavy industrial applications. In the background, several large transport crates can be seen inside a warehouse setting. Per panel: LONG- 3M HIGHT- 75MM WIDTH- 0,20M WEIGHT - 23,2KG
One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm
Total weight 4850 kg.; steel type S235JR; Dimensions 3050x1517x8 mm.
5 tonnes of stacked galvanized steel floor panels used for industrial construction flooring. The panels are neatly arranged on a wooden pallet, ready for installation or transport. These elements are typically used as load-bearing components in mezzanines, factory floors, or elevated platforms, providing strong and durable support for heavy industrial applications. In the background, several large transport crates can be seen inside a warehouse setting. Per panel: LONG- 3M HIGHT- 75MM WIDTH- 0,20M WEIGHT - 23,2KG
One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm
1x 36x35x128 cm, 1x 37x40x180 cm, floor plate size 80x80 cm, 1x 50x42x190 cm, floor plate size 80x80 cm
Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging
Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price
Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm
Stainless steel shelf PAGUS 1280 x 550 x 890 mm with transparent cover plate and a plastic base Dimensions: 1280 x 550 x 890 mm
Stainless Steel Control Box, Control Cabinet PAGUS 6AV3515-1MA22-1AA0 with Control Panel SIEMENS Operation Panel Coros OP 15-C2 SIEMENS Bus Terminal RS485 6GK1500-0AB00 used, tested ! Dimensions: 785 x 180 x 885 mm
Stainless steel cylinder, pneumatic cylinder, double-acting FESTO CRDNG-32-125-PPVA 160884 UN08 stroke 125 mm rod diameter Ø 12 mm Dimensions: 510 x 55 x 27 mm
maximum number of results exceeded
please refine your search
250 € 
