steel form used for sale

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 5 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-28

including tooling for the production of pipes with diameters of 18, 19, 20, 25, 32, and 40 mm, as well as profiles in sizes 14x14 mm, 16x16 mm, and 20x20 mm. The applicable sheet thickness range is 0.6 mm to 1.5 mm. The forming machine—designated \"I1\"—was acquired from an Italian steel profile manufacturer in 2002 and subsequently adapted in-house for the production of the aforementioned steel pipes and profiles. The line comprises the following components: an uncoiler, a strip joining table, a strip accumulator, a forming unit, a sizing unit, a high-frequency generator, a flying saw, a discharge unit, a hydraulic pump, a control panel, and a set of forming rolls. The line utilizes a Lenze control system. Auction-ID: A1-50268-1

free span; trusses c.o.h. 5000mm; roof slope 15 degrees; 3 sets of intermediate trusses IPE180; 2 sets of end trusses with wind posts IPE140; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-17

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 8 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-26

Flat roof construction; steel construction with completely free span; trusses c.o.h. 5000mm; consists of 4 sets of intermediate trusses lattice girders with tubes as uprights; 2 sets of end façade trusses in IPE160 with wind posts; steel drawing; 3D impression; equipped with pressure tubes; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-16

Personnel / Workplace Lockers – 2-Door and 4-Door Units Lot 138 comprising a group of used steel personnel lockers, including two-door and four-door units. The grey painted sheet-steel lockers have individually lockable compartments, ventilation slots and identification numbers. Interiors include hanging rails or hooks, with some units divided into upper and lower compartments. Suitable for employee changing rooms, workshops and industrial workplace storage. Condition: Used Configuration: Two-door and four-door locker units Construction: Grey painted sheet steel Approximate overall dimensions: 6,500 × 500 × 1,900 mm Approximate total weight: 550 kg All descriptions are indicative only. Auction-ID: A1-50546-138

Personnel / Workplace Lockers – 2-Door and 4-Door Units Lot 135 comprising a group of used steel personnel lockers installed side-by-side throughout the company. The group includes two-door and four-door configurations with ventilation louvers, individual keyed locks and identification or number labels. Suitable for employee changing rooms, workshops and industrial personnel storage. Condition: Used Configuration: Two-door and four-door locker units Construction: Grey painted steel Approximate overall dimensions: 6,000 × 500 × 1,900 mm Approximate total weight: 500 kg All descriptions are indicative only. Auction-ID: A1-50546-135

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 7 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41460-31

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 7 sets of intermediate rafters; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-22

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 9 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-20

free span; trusses 5.00 meters; roof slope 15 degrees; consists of 7 sets of intermediate trusses with IPE240 uprights and trusses; 2 sets of end frames with wind posts in IPE160; including steel drawing; 3D drawing; 28 pieces of pressure tubes; 2 sections of wind bracing; 2 compartments of cross braces; purlin lips between the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-11

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 6 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-27

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 11 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 2 trailers; Lot is loaded with a forklift for free Auction-ID: A1-41460-1

free span; trusses c.o.h. 4000mm; roof slope 15 degrees; 2 sets of intermediate trusses IPE160; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41460-18

Personnel / Workplace Lockers Lot 130 comprising a steel locker installation with multiple lockable compartments arranged as two-door vertical units. The blue, grey and light-grey painted steel lockers are fitted with key locks, ventilation slots and label/name holders. Suitable for storing employee clothing and personal items in an industrial workplace. Condition: Used Configuration: Multiple two-door vertical locker units Approximate overall dimensions: 6,000 × 500 × 1,900 mm Approximate total weight: 500 kg All descriptions are indicative only. Auction-ID: A1-50546-130

Personnel / Workplace Lockers – Predominantly 2-Door Units Lot 134 comprising a group of used steel personnel lockers used throughout the company. The lockers are predominantly two-door units with upper and lower lockable compartments, keyed locks, ventilation openings, identification holders and internal clothes hanging rails or hooks. Suitable for employee changing rooms, workshops and industrial personnel storage. Condition: Used Configuration: Predominantly two-door locker units Construction: Painted steel Approximate overall dimensions: 6,000 × 500 × 1,900 mm Approximate total weight: 500 kg All descriptions are indicative only. Auction-ID: A1-50546-134

Kitchenette Sink Cabinet Unit Compact sink unit with a white two-door base cabinet, stainless-steel worktop, integrated single-bowl sink and draining area, single-lever faucet, waste trap and water connections. Power: Not applicable Configuration: Two-door base cabinet with sink, draining area, faucet, waste trap and water connections Application: Break-room, workshop or utility-room use Condition: Used Approximate dimensions: 1,000 × 600 × 850 mm Approximate weight: 40 kg All descriptions are indicative only. Auction-ID: A1-50546-91

Maximum flow rate: 10,8 m³/h, Maximum pumping head: 22 m, Maximum working pressure: 2,2 bar, Liquid temperature range: -5°C to +120°C, Suction connection size: G1¼, Discharge connection size: G1, Motor power: 0,55 kW, Motor power supply: 380Vac / 3 phases, Nominal flow rate: 6,6 m³/h, Nominal pumping head: 17 m. Auction-ID: A1-50595-36

Personnel / Workplace Lockers – Mixed 2-Door and 4-Door Units Lot 133 comprising a mixed group of used grey steel personnel lockers located throughout the company. The lockers include two-door and four-door units with individual keys, ventilation openings, label/name holders and internal hanging rails or hooks. Suitable for employee changing rooms and industrial workplace storage. Condition: Used Construction: Grey painted steel Configuration: Mixed two-door and four-door locker units Approximate overall dimensions: 8,000 × 500 × 1,900 mm Approximate total weight: 650 kg All descriptions are indicative only. Auction-ID: A1-50546-133

Personnel / Workplace Lockers – 2-Door Units Lot 136 comprising a group of used steel personnel lockers used throughout the company. The grey painted steel lockers have two vertically arranged independently lockable compartments per column, ventilation slots, identification holders, keyed locks, internal hanging rails and coat hooks. Suitable for industrial changing rooms and employee workplace storage. Condition: Used Configuration: Two-door locker units Construction: Grey painted steel Approximate overall dimensions: 6,500 × 500 × 1,900 mm Approximate total weight: 550 kg All descriptions are indicative only. Auction-ID: A1-50546-136

for butchery, delicatessen and food processing professionals: MAJA professional meat scoop, designed to facilitate the preparation and processing of meat cuts in a professional environment. This machine has a robust design and is mainly made of stainless steel, which is particularly suitable for the requirements of the food sector and allows for easy maintenance. Its working system is complemented by guides and drive elements visible on the upper part. The machine is mounted on wheels, allowing it to be easily moved around a workshop, butcher's shop or production unit. Its relatively compact size also allows it to be integrated into an existing workspace without the need for a particularly bulky installation. It is equipped with its power cable with industrial plug, as well as easily accessible mechanical controls. Key features: • Brand: MAJA Maschinenfabrik – Hermann Schill ...

German professional equipment designed for intensive packaging! This WEBOMATIC SuperMax-C is a chamber vacuum sealer for professionals looking for a robust solution for packaging and storing products. Particularly suitable for butchers, delicatessens, caterers, restaurants, professional kitchens, processing workshops and food trades, this machine benefits from a solid design with a stainless steel body, ideal for a professional environment. Its large vacuum chamber is equipped with a removable filling plate and protected by a large transparent lid, allowing easy monitoring of the packaging cycle. The Computer System 3000 Sensor control panel offers electronic control directly accessible from the front. The machine is mounted on 4 casters, making it much easier to move and position in a workshop or kitchen. Key features: WEBOMATIC SuperMax-C – type 063-B – machine no. 1810VJ5 ...

Work parameters: Set of 2 stainless steel work tables with backsplash, intended for the preparation or support of equipment in professional kitchens or food laboratories Equipment included: Stainless steel tops, back backsplashes, low shelves and adjustable stainless steel legs Remarks: 1.2 m stainless steel tables with backsplash, quantity indicated: 2 units. Dimensions (mm): 1200 × 600 × 850 Weight (kg): 27 per unit Auction-ID: A1-50725-23

Equipped with Dini Argeo DGT20 weighing indicator. Auction-ID: A1-50393-129

Working parameters: Large stainless steel bowl for washing and rinsing in professional kitchens or food laboratories Equipment included: Large stainless steel bowl with taps, rear backsplash, stainless steel base and low shelf Remarks: Large stainless steel tray 1.2 m.Dimensions (mm): 1200 × 700 × 975 Weight (kg): 30 Auction-ID: A1-50725-18

Welded steel stand with four legs, cross braces and a mounted metal fixture with a vertical post and horizontal arm. Auction-ID: A1-50699-11

New Steel construction 8 m x 28 m Galvanized steel Side column 4 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 4,2 m Wide – 2 m Hight – 1 m Auction-ID: A1-50711-35

Former content: alcohol 96% vol. Auction-ID: A1-50393-134

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461, Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 6,2 m Wide – 1 m Hight – 1 m Auction-ID: A1-50711-34

Max. operating temperature: 120 °C. Auction-ID: A1-50393-110

Max. operating temperature: 120 °C. Auction-ID: A1-50393-132

New Steel construction 8 m x 20 m Galvanized steel Side column 4 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws and nuts Space need for loading Lenght – 4,5 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-24

Includes 3x work chair and 2x stainless steel shell, various sizes Auction-ID: A1-50393-38

New Steel construction 12 m x 44 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 6,2 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-50711-11

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 4170 and 5015, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 6,2 m Wide – 2 m Hight – 1,5 m Auction-ID: A1-50711-42

New Steel construction 8 m x 12 m Galvanized steel Side column 4 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 4,2 m Wide – 1 m Hight – 1m Auction-ID: A1-50711-19

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461; Not included Z-profiles for the roof and fastening bolts, screws, and nut. Space need for loading Lenght – 6,2 m Wide – 2 m Hight – 1,2 m Auction-ID: A1-50711-4

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 7,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-6

New Steel construction 14 m x 20 m Galvanised steel; Side column 5 m high; The structure is made of IPE 160; Frame spacing every 4 meters.; The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Not include Z-profile for roof and walls. Space need for loading Lenght – 7,2 m Wide – 2 m Hight – 1 m Auction-ID: A1-50711-31

New Steel construction 18 m x 45 m Galvanised steel Side column 7 m high The structure is made of IPE 240 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 9 m Wide – 2,3 m Hight – 1,7 m Auction-ID: A1-50711-48

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 6,2 m Wide – 1 m Hight – 1 m Auction-ID: A1-50711-25

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 4170 and 5010, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Not included Z-profiles for the roof and fastening bolts, screws, and nuts. Space need for loading Lenght – 7,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-16

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Single-story farm buildings with a building area of ​​up to 150 m2 and a span of up to 6 m are, according to Polish regulations, exempt from the requirement to obtain a building permit! Space need for loading Lenght – 6,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-37

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 4170 and 5010, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461. Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 7,2 m Wide – 2 m Hight – 1 m Auction-ID: A1-50711-27

New Steel construction 20 m x 45 m Galvanised steel Side column 7 m high The structure is made of IPE 270 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 10,5 m Wide – 2,3 m Hight – 2 m Auction-ID: A1-50711-33

New Steel construction 16 m x 40 m Galvanised steel Side column 7 m high The structure is made of IPE 220 Frame spacing every 5 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings - brace. Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 9 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-50711-7

Features: manhole, temperature indication, bottom and top connection, horizontal thickened stripes, glossy and reflective surface of the outside of the tank, cooling out of order, available from June, Auction-ID: A1-47393-222

New Steel construction Galvanized steel; top profile 50x50x2, bottom profile 50x50x2, cross braces 30x30x2, high 500, post box profile 100x100x4 high 3330 and 4170, roof braces, construction class EXC2, EN-1090-2 standard, surface protection hot-dip zinc PN-EN ISO 1461; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Auction-ID: A1-50711-50

New Steel construction 10 m x 32 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 5,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-38

New Steel construction 10 m x 20 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 5,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-50711-9