steel bar used for sale

\" Office cabinet two-door, light grey, steel shelves – approx. 102 × 45 × 208 cm The cabinets are two-door and lockable. The body is made of melamine-coated furniture boards (MDF/chipboard) in light grey. The internal shelves are made of sheet steel, which provides a higher load-bearing capacity and lasting dimensional stability. Equipment: • 2 doors per cabinet • Lockable (key not provided) • Several steel shelves • Robust metal hinges • Suitable for folders, measuring equipment, documents or stored goods A picture shows both cabinets next to each other. Sale is made without content. 2 pieces Type: Office / filing cabinet Design: two-door Body: melamine-coated furniture panels Shelves: sheet steel Colour: light grey \" Auction-ID: A7-46417-342

\" Steel cabinet with contents – tool holders / grinding mandrels / collets – approx. 670 x 280 x 1020 mm Steel cabinet with extensive contents from workshop inventory. The cabinet is equipped with various grinding mandrels, mounting mandrels, clamping holders, grinding wheels, collets and other accessories. In some cases, the components are stored in polystyrene blocks and labeled (e.g. 5 / 10.0 etc.). Also available: • wooden box SWISSCO Leonberg • various grinding wheels • mounting flanges and spacer rings • collet set (in the wood holder) • further turning and sanding fixtures according to pictures Sale is complete with contents, as shown. • Type: steel cabinet, single-door • Dimensions (W x D x H): approx. 670 x 280 x 1020 mm • Colour: grey / blue • Contents: various tool holders, grinding mandrels, collets, grinding wheels • Condition: used \" Auction-ID: ...

This vertical stainless steel tank from Christian Gresser Behälter- und Anlagenbau GmbH is designed for the efficient storage and processing of liquids, has a volume of 11 hl and an operating temperature of up to 50 °C. The tank has an insulated base construction and is equipped with a cartridge heater, a level indicator (hose), a sampling tap, a manhole opening with cover, an overflow, and two outlets with manual valve flaps, making it extremely versatile for various process applications. It has a width of 1 m, a height of 2.6 m, and a weight of 350 kg. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: heatable, vertical stainless steel tank, Volume: 1172 l, Operating temperature: 50 °C, Power: 25 kW, Voltage: 400 V 3~, Width: 1 m, Height: 2,6 m, Weight: 350 kg, Material: stainless steel, Position: vert ...

Vertical stainless steel pressure tanks on tubular legs, fitted with various fittings., Additional title: Vertical stainless steel tanks, Capacity: 4969 l, Operating pressure: 2 atm, Width: 1,8 m, Height: 2,5 m, Weight: 300 kg, Material: Stainless steel 1.4541 (AISI 321), Position: vertical, standing on 4 pipe feet, Base construction: cylindrical tank with dished heads, Features: Manway; safety valve; CIP piping

659 litre, Stock number: T4040, Litre: 659, Material: Stainless steel AISI 305, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 415 mm., Turbolence plate: Yes, Agitator: Yes, Agitator type: 3-bladed propeller, Agitator placement: From the top, Motor: 0,55 kW - 220/380 Volt - 221 rpm., CIP: Yes, Working temperature: 120° C, Working pressure tank: 1 bar, Working pressure double jacket: 4 bar, Inner diameter: Ø 920 mm., Outer diameter: D 1090 mm., Total height: H 2135 mm., Manufacturer: Gjettermann & Nielsen A/S, Year: 1991

3 vertical stainless steel tanks, each capable of being heated with hot water. Previously used as CIP tanks (2 x alkali tanks and 1 x acid tank), Additional title: heatable, vertical stainless steel vessel, Volume appr.: 1000 l, Width: 1 m, Height: 2 m, Weight: 250 kg, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with square tubular feet on spherical caps, Features: Top lid, temperature measurement, equipment for heating with hot water

Cylindro-conical fermentation tank made of austenitic steel., Additional title: vertical, coolable stainless steel tank, Capacity: 6300 l, Max. overpressure: 1 bar, Temperature range: 50 °C, Length: 1700 mm, Height: 4359 mm, Material: stainless steel 1.4571, 1.4404, 1.4301, Position: standing, vertical, Base construction: feet, Features: 2 x jacket cooling, 1 x cone cooling

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989

3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: Vertical stainless steel tanks with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

200 litre, Stock number: T4028, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Conical, Inner diameter: Ø 500 mm., Total height: H 1520 mm., Manufacturer: Alfa Laval, Model/type: Vacuum tank type DD, Other: No condenser

60.000 litre, Stock number: T4010, Litre: 60.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a skirt with bracing and strengthening, Top: Conical, Bottom: Conical, Tank cover: 2 pcs, in the top, Ø 480 mm. and in the side, 430 x 530 mm., Agitator: Prepared for agitator in the side, Inner diameter: Ø 3400 mm., Total height: H 7700 mm., Manufacturer: Kolding DDMM

Net capacity: 20,000l, gross capacity: 21,610l, operating temperature: -10 to 100°C, operating overpressure: -0.1 to 0.6bar, material: 1.4571, medium density: 1.3t/m³, height: 4958mm, diameter: 2850mm, empty weight: 2.9t, weight of insulation, platform, access ladder, pipe holder, agitator: 700kg, minimum installation weight: 3.6t. With complete documentation, sale including insulation. An on-site inspection is possible, fully cleaned and ready for operation.

Total approx. 36 pieces Auction-ID: A1-46266-379

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-19

LOT 7 Type: Carport auto 4 places Material: Steel construction Year of construction: 2026 Total area: 60 sq m Overall size (1): L 6000 mm Overall size (2): L 10000 mm Height: 2500 mm Ridge height: 3223 mm Additional information: Roof slope: 10 degrees; Painted Galva Zinc; The construction consists of 4 beams (trusses) made of IPE 180 profile and 2 columns of HEA 220 profile; The entire structure is assembled with bolts (removable); Condition: unused; The structure includes a certificate of conformity for materials; Auction-ID: A7-46289-7

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE360/300; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-2

free span; trusses c.o.h. 5000mm; roof slope 15 degrees; 4 sets of intermediate trusses IPE200; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-10

free span, trusses c.c.h. 5000mm, consisting of 3 sets of intermediate trusses IPE200, 2 sets of end trusses with wind posts IPE160, equipped with wind bracing, pressure ducts, purlin lips on the rafters, detailed drawing intermediate trusses, steel construction is neatly ready for transport and must be picked up with 1 trailer, lot is loaded free of charge with a forklift Auction-ID: A1-41455-11

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 7 sets of intermediate rafters; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-18

free span of canopy construction; trusses c.o.h. 5000mm; front height 4450mm, rear height 3650mm; 5 sets of intermediate trusses HEA140; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-12

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 11 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-14

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 4 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-21

Dutch production; free span; suitable for solar panels; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; 3D drawing; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 11 sets of intermediate trusses IPE 450 uprights and IPE 450/360 trusses; 2 sets of end trusses IPE 220/200/180 with wind posts, 1 set of which is equipped with a UNP260 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 2 trailers; Lot is loaded with a forklift for free Auction-ID: A1-41455-1

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-20

Total approx. 96 pieces Auction-ID: A1-46266-378

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 8 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-17

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 3 sets of intermediate trusses IPE 240; 2 sets of IPE 180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-9

Flat roof construction; steel construction with completely free span; trusses c.o.h. 5000mm; consists of 4 sets of intermediate trusses lattice girders with tubes as uprights; 2 sets of end façade trusses in IPE160 with wind posts; steel drawing; 3D impression; equipped with pressure tubes; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-16

Various sizes cm; Dim. Fence 93x180 cm Auction-ID: A1-46266-498

Type: Steel fence panels Material: Corrugated sheet metal (0.8 mm thickness) Color: RAL 7023 Grey Panel dimensions (W x H): 2,000 x 1,600 mm Quantity: 10 panels Surface protection: Painted finish Application: Perimeter fencing / property enclosure Condition: Unused Loading: Free loading included Auction-ID: A7-46289-34

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE 270/240; 2 sets of IPE 200/180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-6

Total approx. 90 pieces Auction-ID: A1-46266-380

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; steel drawing; 3D drawing; roof pitch 25 degrees; 9 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-15

Total approx. 90 pieces Auction-ID: A1-46266-377

Dutch production; free span; trusses c.o.h. 5100mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 7 sets of intermediate trusses IPE 300; 2 sets of IPE 200/180 end frames with wind posts, 1 set of which is equipped with a UNP180 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-4

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 6 sets of intermediate trusses IPE 270/220; 2 sets of IPE 180 end trusses with wind posts, 1 set of which is equipped with a door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-7

free span; trusses c.o.h. 4000mm; roof slope 15 degrees; 2 sets of intermediate trusses IPE160; 2 sets of IPE140 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-13

Dutch production; free span; trusses c.o.h. 5000mm; steel calculations; steel drawings; assembly drawings; anchor plan; steel numbered according to assembly plan; roof slope 20 degrees; 9 sets of intermediate trusses IPE330/270; 2 sets of end trusses IPE 220/200/180 with wind posts, 1 set of which is equipped with a UNP220 door recess; equipped with pressure tubes; wind bracing; purlin lips; nuts and bolts; dump anchors; steel construction according to product standard EN1090 (Certificate available after purchase); lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-3

free span; trusses c.o.h. 5000mm; roof slope 15 degrees; 9 sets of intermediate trusses IPE300/270; 2 sets of end trusses IPE180 with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; cross braces; purlin lips on the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-5

LOT 8 Type: Carport 2 places Material: Steel construction Year of construction: 2026 Total area: 30 sq m Overall size (1): L 5000 mm Overall size (2): L 6000 mm Height: 2500 mm Ridge height: 3223 mm Additional information: Roof slope: 10 degrees; Painted Galva Zinc; The construction consists of 2 beams (trusses) made of IPE 180 profile and 2 columns of IPE 200 profile; The entire structure is assembled with bolts (removable); Condition: unused; The structure includes a certificate of conformity for materials; Auction-ID: A7-46289-8

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 6 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-22

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; roof pitch 25 degrees; 3 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-23

with fixed castors Auction-ID: A1-46480-2425

with fixed castors Auction-ID: A1-46480-2427

with fixed castors Auction-ID: A1-46480-2428

with fixed castors Auction-ID: A1-46480-2426

6.300 litre, Stock number: T3876, Litre: 6.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., Agitator: Yes, Agitator type: 3-bladed propeller, Motor: 0,55 kW - 220/380 Volt - 670 rpm., CIP: Washing wing, Inner diameter: Ø 2200 mm., Outer diameter: D 2320 mm., Dimensions: L 3230 x H 2860 mm., Manufacturer: Chotěboř, Model/type: STU 63, Year: 1986