137,473 used machines on RESALE, but how to find them? Machine Search
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg
T15 - used approx. 45 m³ / 45,000 L steel tank, pressure tank, coated inside, lying on steel bases. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Steel tank with inner coating Manufacturer: Tank- u. Stahlbau Abersfelder Dimensions: approx. Ø 2.30 m × L 11.00 m / H total 2.50 m Other: Used steel tank with Poxitar inner coating (2-component polyester resin), professionally cleaned and in good condition. Pressure tank 10 bar. Horizontal storage container on 2 steel bases, several inlets and outlets. Can be used as an above-ground tank or as an underground tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., o ...
Max. punching capacity: 600 kN Max. shear capacity: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shear Large support table on the punching side with stops Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 2,000 kg
Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg
T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...
with laser positioning aid at the punching station Hydraulic cylinders with fast return stroke Easy installation of special tools Projection also available in 310 mm including punch/punch search device Punching capacity: D 22 x 18, D 50 x 8 mm Max. stroke length: 100 mm Table size: 700 x 700 mm Projection: 510 mm Dimensions: 1520 x 820 x 1960 mm Weight: 1850 kg
Complete Sterile Tank Unit with PLC and Aseptic Valve Cluster High-quality sterile tank unit designed for hygienic storage and handling of liquid food products such as milk, juice, and similar beverages. The system includes a fully automatic aseptic valve cluster with PLC control and HMI, ensuring reliable operation and integration into modern aseptic processing lines. Main Tank Specifications - Tank Product Capacity: 12,740 liters (12.74 m³) - Working Capacity: 10,850 liters (10.85 m³) - Water Capacity: 662 liters - Maximum Pressure: 3.5 bar - Minimum Pressure: -1.0 bar - Test Pressure: 5.8 bar - Maximum Temperature: 145 °C Technical Data Materials - Product contact parts: 1.4404 stainless steel - Cooling jacket and legs: 1.4301 stainless steel Design Parameters - Design Pressure: +3.5 bar ÷ -1 bar - Design Temperature: 145 °C - Total Capacity: 12.74 m³ ...
with 5 stations Punching diameter: 40 x 8/22x 15 mm Projection: 165 mm 1-cylinder machine with footswitch with lighting Stop: 1000 mm Projection: 165 mm Punching diameter: 40 x 8/22 x 15 mm Blade length: 300 mm Notching: 50 x 90 x 70 mm Total power requirement: 3.7 kW Colour: blue/beige Angle steel: 75 x 75 x 6 mm Flat steel: 300 x 10 mm Square steel: 25 x 25 mm Round steel: D 30 mm Punching pressure: 45 t Dimensions: 1050 x 760 x 1490 mm Weight :840 kg
Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg
Screws, eye bolts, crane eye, ring nut, eye nut -Manufacturer: Golfaro, M10 eyebolts -Grade: Stainless steel A2 -Quantity: 140 ring nuts available -Price: per piece/ Minimum order 15 pieces -Dimensions: 45/26/H46 mm -Weight 0.1 kg/pc.
Punching capacity: ø 18x14 mm, (diameter and thickness): ø 50x5 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate/min. (20 mm stroke): 41 Max. hole diameter: ø 160x2 Motor power: 3.7 kW Punching force: 35 ton Weight: 1200 kg
Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.
for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)
Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.
Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg
Stainless Steel Control Cabinets 3 - Door 6 fans each galvanized base plates empty
-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg
-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg
Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89
-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H800 mm -Weight: 82 kg
-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg
One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm
One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm
Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm
Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm
Stainless steel shelf PAGUS 1280 x 550 x 890 mm with transparent cover plate and a plastic base Dimensions: 1280 x 550 x 890 mm
Stainless Steel Control Box, Control Cabinet PAGUS 6AV3515-1MA22-1AA0 with Control Panel SIEMENS Operation Panel Coros OP 15-C2 SIEMENS Bus Terminal RS485 6GK1500-0AB00 used, tested ! Dimensions: 785 x 180 x 885 mm
Stainless steel cylinder, pneumatic cylinder, double-acting FESTO CRDNG-32-125-PPVA 160884 UN08 stroke 125 mm rod diameter Ø 12 mm Dimensions: 510 x 55 x 27 mm
Stainless Steel Control Box, Control Cabinet PAGUS 600 x 245 x 775 mm ( 600x245x775mm ) with control panel SIEMENS Operation Panel Coros OP 15-C1 6AV3515-1MA20-1AA0 SIEMENS 6ES7 214-1AC01-0XB0 6ES7 223-1HF00-0XA0 Dimensions: 600 x 245 x 775 mm
Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile shelving unit, tray trolley, embroidery trolley -Width: 1010 mm -Depth: 690 mm -Height: 1600 mm -Number of subjects: 36 -Material: Stainless steel -Sheet width: 460 mm -Quantity: 1 piece available -Weight: 45 kg
Stainless Steel Control Box, Control Cabinet PAGUS 600 x 210 x 480 mm Dimensions: 600 x 210 x 510 mm
Control cabinet PAGUS 2 doors stainless steel control cabinet Dimensions: 800 x 400 x 1975
Stainless steel pipe bend, welded bend -Size: 40 x 1.5 mm 90° Price: complete -Quantity: 39 pieces -Weight: 7 kg
Stainless steel tee, stainless steel pipe bend, welded bend -Size: DN 40 316L -Size: DN 20 316L -Price/Sale: complete -Quantity: 28 pieces DN 40 -Quantity: 16 pieces DN 20 -Weight: 8 kg
Steel bottle cart PAGUS for 10 - 40 liter bottles bottles Ø max 240 mm Dimensions: 750 x 770 x 1340 mm
Tank material: Stainless Steel 304 2B x 3.0mm thk plate. Direct Drive system: 3HP X 415V IE3 6 Pole Flange Mounted Motor c/w TPG helical gear reducer with grease vertical moulting Model: GVS-50-R60, Torque: 1065NM 2 set Stainless Steel Channel Blade c/w Dia. 1.5" SUS304 shaft 2 nos Dia 2" SUS 316 Ball Valve c/w Aluminium Quick Coupler 4 set of 150mm & 76mm x 1800mm M/S Channel as tank support 1 set #100 SUS Removable Filter 14 units internal Dia. 12mm S/S step ladder Tank size: 2400mm (D) x 4500mm (H) Semi-open tank cover with butterfly hinges Completed with Direct drive stirrer system PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 42
Stainless Steel Basket, Dipping Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 10 x 10 mm Stainless Steel ! Dimensions: 500 x 330 x 400 mm
Stainless Steel Basket, Dipping Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 12 x 12 mm Stainless Steel ! solid design ! Dimensions: 500 x 330 x 400 mm
Stainless Steel Basket, Immersion Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 10 x 10 mm Stainless Steel ! Dimensions: 500 x 330 x 400 mm
Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...
Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1170 mm -Wall thickness: 17 mm -Length: 4340 mm -Weight: 476 kg/m
maximum number of results exceeded
please refine your search
