steel bar used for sale

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 560 mm -Dimensions: 625/855/H210 mm -Weight: 6.3 kg

Lockable stainless steel container, stainless steel pot, stainless steel cooking pot -Stainless steel: Stainless steel pot -Internal dimensions: 375 mm -Depth: 310 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 400/H310 mm -Weight: 2.4 kg

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 650 mm -Dimensions: 850/955/H335 mm -Weight: 13.7 kg

Stainless steel chimney cover, chimney cowl -Inside bracket spacing: 460 mm -Dimensions: 755/1065/H400 mm -Weight: 14 kg

Stainless steel VA chimney cover, chimney hood -Hole spacing: 135 x 385 mm -Price: per piece -Number: 2x available -Dimensions: 655/730/H170 mm -Weight: 4.7 kg

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

7,48m conveying spiral, steel, MDB 80, , new Special price ! As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging.

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

Profile steel shears

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 4,020 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25,50 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 3,750 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 22.70 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

Stainless steel pipe bends, welding bends -Stainless steel pipe bend: welding bend 1.4541 W 90° -Size: 168.3 x 2.6 -Quantity: 5 sheets available -Price: per piece -Dimensions: 440/215/H167 mm -Weight: 3.6 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, distributor drum, distributor roller -Distribution drum: Material stainless steel -Overall diameter: 290 mm, length 685 mm -Drum diameter: 205 mm -Hole: Ø 30 mm -Dimensions: Ø 290/685 mm -Weight: 10.8 kg

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Exhaust pipe, transition piece, exhaust gas exhaust system, exhaust system -Manufacturer: Metaloterm, transition piece without flange for exhaust system ADAS -Type: LOT: PN91564 0914 -Dimensions: see photos -Total dimensions: Ø270 x 290 mm -Weight: 2 kg

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Manufacturer: unknown Capacity: ~750 l Year of construction: 2000 Standing on 3 feet CIP-capable Manhole available Material: V2A / AISI 304 Condition: good

Double locker made of metal Specifications: Material: metal, lacquered External dimensions: H185 x W60 x D50 cm 2 lockable doors with matching key Compartments with top parcel shelf and hooks for clothes with ventilation slots on each door at the top and bottom solid, welded design no cheap imported goods, Made in Germany! Equipment is in Stock, available now! The lockers are stored dry, in the building! Price is per piece. Condition see original pictures.

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

The scope of delivery includes: 01x Fluted steel panel, used Manufacturer: SSI Schaefer Material colour: sendzimir galvanized for frame depth: 850 mm Total length: approx. 850 mm Total width: approx. 150 mm Total height: approx. 11 mm Center-center hole: approx. 780 mm Material thickness: approx. 1.3 mm Weight | Pcs.: approx. 1,930 kg Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt, slat belt -Conveyor belt: link belt stainless steel -Width: 150mm -Length: 11500mm -Number: 2x available -Price per piece -Transport dimension: 420/400/H150 mm -Weight: 47 kg/pc.

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Fire water tank, rainwater tank Steel tank with a volume of 50,000 L Weight: 14 tons Dimensions: Ø 3.00 m × 8.5 m long

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: double-winged, compartment width 30 cm -Width: 600mm -Depth: 500mm -Height: 1820mm -Doors: lockable, without lock -Number: 2x locker available (1x with 2 shelves) -Price per piece -Weight: 40kg / 42kg

Fire water tank, rainwater tank, underground Double-walled steel tank with a volume of 50,000 L Dimensions: Ø 2.50 m × 11 m long

Steel tank with a volume of 40,000 L standing, with feet, filter tank, water tank Weight: 8 tons Dimensions: Ø 2.90 m × 7.00 m high incl. feet Feet are 1 m high

Wire rope, steel rope, nylon rope, ship rope, rope line -Steel cable/rope: with loops -Steel cable: Ø27 mm, length 13 m -Nylon rope: Ø 100 mm, length 4 m -Price/delivery: complete -Transport dimension: 1400/1100/H340 -Weight: 132 kg

Filter tank, water tank, upright, feet Steel tank with a volume of 23,000 L Weight: 6 tons Dimensions: Ø 2.70 m x 5 m high incl. feet Feet are 1 m high