steel bar used for sale

OKUMA OSP-U100L control, with bar feeder TOP AUTOMAZIONI XF370 Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-19

45 LED Bars – 24 × 15 W RGBWA Packed in flight cases of 8 units. All units have been tested; a detailed fault list is available upon request. Auction-ID: A1-50232-42

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40314-149

• dimensions of supporting surface: 2000 x 1100 mm

Luxury Red Canadian Cedar Barrel Sauna – 6 people – 9 kW – panoramic dome Specifications: Material: Red Canadian Cedar wood Capacity: up to 6 people Sauna heater power: 9 kW Barrel length: 2,800 mm Total length including dome: approx. 3,400 mm Diameter: approx. 1,800 mm Features: Treated Red Canadian Cedar wood 9 kW electric sauna heater External control of the sauna heater Temperature control Temperature gauge Hourglass Infusion bucket and spoon Large polycarbonate dome with privacy glass Particularities: Packed in the original transport crate Sauna heater is new Auction-ID: A1-47445-6

: neu : 2026 : 090222 : prompt, Zwischenverkauf v : Spanien : 15800 € : 303.36 € : 1 : 1 : 50 to : 177 mm : 5 : 1 : 31 x 12 mm : 34 1/min : 350 x 15 mm : 80 x 8 mm : 35 / 30 mm : 10 mm : 100 x 10 mm : 3 kW : 1300 mm : 1100 mm : 1850 mm : 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The da ...

: neu : 2026 : 090194 : prompt, Zwischenverkauf v : Spanien : 22400 € : 430.08 € : 1 : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 € : 947.36 € : 130 to : 600 mm : 5 : 2 : 50x18 mm : 80 mm : 600x18 (max. 600x20 mit D mm : 120x120x11 (max. 150x150x mm : 45/40 mm : 130x12 mm : 250x12 mm : 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2009 : 9725 : prompt, Zwischenverkauf v : Spanien : 14700 € : 1 : 110 to : 300 mm : 5 : 2 : 40x20 (28x28) mm : 80 mm : 17 1/min : 600x15 (400x20) mm : 605 mm : 152x152x13 mm : 50/50 mm : 90x52x13 mm : 5 kW : 2130 mm : 1200 mm : 2200 mm : 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHEC ...

CNC bar-fed lathe, year 2003, CNC Fanuc 16i-TB. Used machine. More info & price on IndustrialBuyer.

Power supply: 220V; Capacity: 5x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-60

Power supply: 220V; Capacity: 6x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-63

Power supply: 220V; Capacity: 5x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-61

In 21 cardboard boxes; unused and in original packaging Auction-ID: A1-49785-369

Power supply: 220V; Capacity: 8x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-65

Power supply: 220V; Capacity: 8x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-64

In 2 cardboard boxes Auction-ID: A1-49785-314

For ISO turntables; shaft 8/ 10/ 12/ 16 mm; unused and in original packaging Auction-ID: A1-49785-190

Power supply: 220V; Capacity: 6x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-62

Inside and outside; unused and in original packaging Auction-ID: A1-49785-139

Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40898-434

Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40898-435

Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40898-291

Steam hardening plant, Fabr. Kraft Energy - Type Generator K15/1SHP = Power 450 Kw for heating formwork = with the heating system it is possible to occupy formwork 3 times a day! - 8 separately controllable hardening zones - Automatic temperature control - Versatile use, e.g. for truss and rod part shapes, segment production, wind turbine tower segments as well as pipe & tank manufacturing

Pig stalls with equipment Specifications: Box size: 420 x 260 Hardwood floor, consisting of separate grids of approximately 131 x 100 Stainless steel fences and boxes Plastic food bowls: approx. 400 x 37 x 56 Features: Stainless steel drinking water system with pumps, nozzles and stainless steel pipes Stainless steel feed feeder pipes Compound feed troughs with electric pumps Control panel 2 feed silos Particularities: The installation must be dismantled and removed by the buyer himself Transport, removal and tools must be arranged by the buyer himself Auction-ID: A1-47390-303

Hexagon bolts in wooden compartment rack Various sizes ranging from 525 to mm, 775 mm and 2000 mm As well as wooden furniture with spray cans Auction-ID: A1-50251-287

Including anchor rod contents, consisting of wooden rack with reinforcement bars, crate pallets with reinforcement bars Auction-ID: A1-50251-424

230V , 1840W. IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-52

Equipped with: Solid oak, Black rings, 95 cm. high .57 cm. diameter top, 70 cm. Diameter belly,Thick-walled,Robust quality, No loose rings or broken staves, waterproof. Auction-ID: A1-47446-501

Hexagonal bolts in compartment rack and 6 grab storage bins Various sizes from 100, 125, 150, 175, 200, 225, 300 to 500 mm Auction-ID: A1-50251-275

Pallet, consisting of 800 threshold bars, new, packaged, individually mix of style and size. Auction-ID: A1-50192-152

Pallet with 800 new, individually wrapped sill bars. Mix of styles, models and sizes Auction-ID: A1-50192-756

Pallet consisting of 800 new, individually packaged threshold bars. Mix of models, styles and sizes. Ideal set for building professionals, DIY stores and retailers. Auction-ID: A1-50192-159

Set consisting of 10 pallets of 240 bamboo barriers each, for a total of 2,400 pieces. Dimensions: 120 centimeters long × 40 centimeters high. Plan the application of a wood oil or a stain. Products sold as is. Auction-ID: A1-50192-42

Pallet, consisting of 800 threshold bars, new, packaged, individually mix of style and size. Auction-ID: A1-50192-181

Set of 20 wooden barriers measuring 120 cm long by 40 cm high. The wood requires restoration by the application of a suitable stain or oil. Lot sold as is. Auction-ID: A1-50192-173

Set including 20 wooden barriers. Dimensions: 120 centimeters long × 40 centimeters high. Plan to re-stain the wood or apply a wood oil. Products sold as is. Auction-ID: A1-50192-681

Pallet, consisting of 800 threshold bars, new, wrapped, individually mix of style and size. Ideal for building professionals, DIY stores, dealers and destocking operations. Auction-ID: A1-50192-246

Set of 30 threshold bars available in an assortment of models and sizes. Ideal set for building professionals, DIY stores and dealers. Auction-ID: A1-50192-161

Set including 100 mini dark chocolate bars of 30 grams each. Minimum durability date: December 2025, exceeded. Total net weight: 3 kg. Auction-ID: A1-50192-624

Set of 30 new sill bars, presented with original packaging. The elements are available in different lengths, widths and finishes. Auction-ID: A1-50192-134

Including various grinding wheels, grinding stones, chains, sanding belt, plastic capping materials and plastic barrel ø approximately 50 cm height approximately 70 cm; without pallet box; Auction-ID: A1-44050-310

Pallet comprising 120 bamboo barriers from a water damage disaster. Dimensions: 120 centimeters long × 40 centimeters high. Plan the application of a wood oil or a stain. Products sold as is Auction-ID: A1-50192-680

Set of 20 wooden barriers measuring 120 cm long by 40 cm high. The wood requires restoration by the application of a suitable stain or oil. Lot sold as is. Auction-ID: A1-50192-174

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-50533-404

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-50533-405

working area:10700 mm Tube length:300-11000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm Power:120 KW dimensions:21,5 x 5 x 3,8 m mm weight:90.000 kg pre-turn capacity:200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1

Technical data Manufacturer: MAZAK Corporation Model: Quick Turn 10N / QT 10N UNIV. Year of manufacture: 03/1987 Control: MAZATROL CAM T-2 Weight according to nameplate: 7,500 lbs Connection according to the marking: 380 V Max. swing diameter: 440 mm (Source: Online research) Max. machining length: 507 mm (Source: Online Research) Spindle speed: 10–2,600 rpm (source: online research) Spindle bore: 56 mm (Source: Online research) Travel X/Z: 155 / 540 mm (Source: Online Research) Tool turret: 8 positions (Source: Online Research) Configuration CNC lathe with tool turret and chuck. MAZATROL CAM T-2 CNC control with screen and control panel. Attached bar feeder available for material feeding. Lateral chip conveyor available. Closed work area with sliding door. Control was on at the time of shooting. Remarks The machine comes from a well-maintained company liq ...

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com