steel bar used for sale

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Take-up Winders for synthetic Yarn Barmag POY / FDY filament yarn high speed take-up winder, SW4 type with 2 bobbins Chuck length: 600 mm Chuck type: 2 bobbins Chuck dia: 75 mm Stroke length: 250 mm max package dia: 305 mm MAX MECHANICAL SPEED 6000 M / MIN, WITH DOUBLE-DECK ARRANGEMENT AND PITCH 410 MM

new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2019,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts. We have many brands and models machines, tell me what you need seriously!

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Lmacchia Barley twist lathe- model012/FE Spiral/rope turning lathe Barley twist with automatic indexing 67" max. length 8" max. working diameter as new condition...$9,500 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Storage Tank 920 Litres with cooling jacket in AISI 304 NEW, incl. TÜV Certificate Standard Features: Total Height: 2460 mm Body Height: 1900 mm Diameter: 850 mm weight: approx. 240 kg max.working pressure product space: 6 bar Material of tank: 1.4301 max.working pressure cooling jacket: 1 bar max.working temperature to °C: 130 Surface inside: III C

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm

BARMAG POLYESTER EXTRUSION -SPINNING LINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT YARNS • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

1 gebr. Boiler ------------------------------------ - mounted on frames - - With integrated Eco - Manufacturer : LOOS, Gunzenhausen Type : UL-S 4000 Heating surface approx. : 80 m² Capacity : 3.170 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 19 bar Water content at NW approx. : 5.930 l Water content full approx. : 8.020 l Year of construction : 07 / 2010 CE mark : CE 0036 equipped with Elco oil burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings. Integrated Economizer Type Eco1: Ab. Pressure max. : 31 bar Test pressure : 56 bar Ab. Temperature max. : 238°C Heat output : 92 kW Total volume : 40 ltr

Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm

Type Bartumb New! MC control maximum load: ± 380 kg with vacuum pump "Busch" Dimensions (L x W x H): ± 2,200 x 2,100 x 2,500 mm stepless speed from 0 to 9 revolutions / minute a variety of products, as all varieties of salads, meat and fish, can be mixed /tumbled with the Bartumb. + With loading arm for standard car 200L

1 BARUDAN double head embroidery machine type BEAT-802T-YS, 2 heads, 7 needles each head, with driver unit SDV-I, BARUDAN SMT keyboard

We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very good condition. Serious buyers contact us.

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

Debarking machine Bar Gar Bg 90 min 140/ max 900mm motor 22 kw with cententic table block pull with ejection

Entrideting machine Bar Gar BG90 min 140/ max 900mm moror 22kw with cententic table block pull with ejection after renovation with warranty

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

Bartscher refrigerated table 0 °C to 10 °C 1 unit – double benefit: convection cooling ensures a constant and uniform cooling temperature inside the refrigerated table with 1 door and 4 drawers. With its high-quality and robust stainless steel surface, the appliance can be perfectly integrated into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door Type: Hinged Door(s) • Number of doors: 1 • Number of cabinets: 1 • Cabinets refrigerated: Yes • Drawers refrigerated: Yes • Standard format drawers: 1/1 GN • Connected load: 0.452 kW | 230 V | 50 Hz • Feet height adjustable: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital Display: Yes • Depth GN container max.: 150 mm • On/Off S ...

BARCODE PRINTER / LABEL PRINTER CAB A4 + Equipment / Additional information: Printer method: thermal transfer / thermal direct Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm / sec (203 dpi), 152 mm / sec (300 dpi) Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card

Hydraulic pump, 0513300201, 140 bar, Bosch, mint condition Please note: This is an original Bosch product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, has never been used and is in mint condition. Drive shaft d20mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and co ...

The Lutetia Type 1 sous vide churn is aimed at food professionals who require high marinade quality and production performance. Indeed, this model can process up to 400 kg of meat and brine per cycle, making it a perfect solution for medium-sized workshops. In addition, the 950 liter tank volume ensures a comfortable margin for vacuum marinating operations, while ensuring repeatability of results and consistency of processing. Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approx. 800 kg, this churn easily fits into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, taste and added value of the finished product. For example, the internal components and robust workmanship ensure a longer service life, while the quick integration and simplified maintenance reduce production downtime. In addition, the L ...

The Lutetia T2 churn is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited to medium-sized productions. This ensures an ideal balance between performance and space. Thanks to its homogeneous mixing system, the T2 Churn optimizes marination and improves the texture of the products. This is because the vacuum process promotes uniform brine penetration and reduces yield losses. In addition, it preserves the quality of the meat by limiting oxidation and improving preservation. This efficiency makes it an essential tool for manufacturers wishing to produce with regularity and consistency. In addition, its robustness and stainless steel design ensure optimal durability. Food contact surfaces meet the highest hygiene standards, simplifying cleaning and maintenance. In addition, its footpri ...

The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures homogeneous absorption of liquids, which improves the texture and flavor of the finished products. In fact, it allows you to marinate large quantities of meat efficiently, guaranteeing consistent and high-quality results. In addition, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With a high mixing capacity, it is perfectly suited for large productions, while ensuring a smooth and fast work process. In addition, it can be easily integrated into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. In short, the Lutetia Type 4 Churn is  ...

The Lutetia Type 5 vacuum churn is a must-have tool for food industry professionals looking to improve the quality and efficiency of their processing processes. Designed for processing large quantities of meat, this churn optimizes marinating and seasoning with its vacuum operation, ensuring even absorption of liquids and spices. This machine is equipped with a timer with variable speed drive, which allows each cycle to be customized according to specific production needs. As a result, it delivers consistent results while optimizing processing time. Thanks to its large capacity of 3800 to 4000 kg of meat and brine, the Lutetia T5 is particularly suitable for intensive production environments. Its robust, stainless steel design ensures exceptional durability and maximum hygiene, essential in food processing processes. In addition, its variable speed control allows precise control of th ...

Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR

Bartscher combi steamer for 2/3 GN shells, with core temperature probe, with 3 flat 2/3 GN shells and 3 deep 2/3GN shells (see photos), 4 shells of which are new. Current: 230V/50Hz, 2.5 KW with operating instructions

Barwell MR400 Top Load Ram Extruder

Barwell Hydraulic Extruder – Used For sale: a used Barwell hydraulic extruder, designed for processing rubber compounds and elastomers. Barwell machines are well known worldwide for their robust construction, reliability, and consistent performance in industrial applications. The machine has been operated in an industrial environment, regularly maintained, and remains in good technical condition. Ready for further use after installation. Key features and advantages: Hydraulic drive ensuring smooth, stable, and precise extrusion Heavy-duty, solid construction for long service life Reliable operation, even with demanding rubber compounds User-friendly operation and easy integration into existing production lines Proven Barwell quality, widely trusted in the rubber industry Applications: Extrusion of rubber profiles and semi-finished products Preparation o ...

machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.

Solenoid valve, directional control valve, valve manifold, control valve -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 233.50.063 16 bar -Art.-No.: 12064394 -Screw connection: G1/4B -Dimension box: 90/100/H70 mm -Weight: 0.3 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, pressure gauge 0 to 4 bar -Price: per piece -Number: 2 piece -Minimum purchase: complete -Dimension: Ø 62 x 47 mm -Weight: 0.1 kg/piece

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Riegler, manometer -Type: 110.43-K 0 to 2.5 bar -Screw connection: G1/8 B -Price: per piece -Number: 9 piece -Dimension box: 50/45/H40 mm -Weight: 0.1 kg/piece