135,322 used machines on RESALE, but how to find them? Machine Search
Recon Part number: 0337 9970 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 2.3597-BB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...
RECON PE12P 120A 520 / 5RS 428-1 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 0212 5807 and 0212 5811 new Upper Part! ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 1227 6584 0 401 430 015 PE12A120/520/6RS1510 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us For further questions we are gladly available!
Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price
PE12P110A520/5RS508 D 401 870 070 / RSUV 300-1150 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor
Key data: 3200 mm, 287 , 50
Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Complete control CC 90 for ENGEL injection moulding machines
Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
with spare screw, high-pressure hose and various spare parts - see pictures
Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm
FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece
Oil injector similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: Whether 8000B Condition: used, expanded from a running system!
many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available
motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible
Nozzles, injectors, diesel engine nozzles -Type: 0423 1554 -Quantity: 12 pieces available Price: per piece -Weight: 0.3 kg
Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.
Nozzles, injectors, diesel engine nozzles -Type: 0223 3085 Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg
Key data: 6500 mm, 2013 , 80
Screw diameter: 80 mm Injection weight in polystyrene: 2013 g Clamping force: 6500 kN Screw diameter: 80 mm Stroke volume: 2212 cm³ Injection weight in polystyrene: 2013 g/hp Injection pressure: 2,090 bar Clamping force: 650 t Lights Tie-bar spacing H x V: 1040 x 910 mm Tool installation height - min.: 400 mm Opening distance: 500/1350 mm Microprocessor control: KEBA 2985- 15' tou screen Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 28,000 kg Total size: 7.7 x 2.6 x 2.7 m Payment terms: 100 % before taking over the machine, net only
PLASTIC MOLDING MACHINE FOR CONSTRUCTION POWER: 600 TON FLOOR FROM 1130 X 1130 MM SWITCHING BETWEEN COLUMNS: 730 X 730 MM
This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.
Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.
VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR
Key data: 600 , 132 , 35
Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment
Key data: 800 , 132 , 35
Manufacturer/Manufacturer: Arburg Typ/Type: 370C 800-250 Bau-year year: 2003 Control/Controller: Selogica Clothing kraft/Clamping Force: 800 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 34 mm Lifting volume/shot volume: 144 cc/132 gram hp Spez. Spray./injection pressure: 1820 bar General General Motor/Motor Power: 15 kW Heating/heating power: 8.6 kW Dimensions: 4.2 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap
Key data: 1300 , 194 , 45
Manufacturer/Manufacturer: Arburg Typ/Type: 420C 1300 kN-350 Bau-year year: 1999 Control/Controller: Selogica Closing Power/Clamping Force: 1300 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 605 mm x 605 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cc/166 gram hp Spez. Spray./injection pressure: 1670 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weicht/Weight: 5100 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core Pulling: x1 Euromap Vario
2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T
Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details.
1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T
Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro
Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )
The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.
maximum number of results exceeded
please refine your search
