steam inject used for sale

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

Key data: 2000 kN, 55 mm

Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica

Key data: 2400 kN, 594 g/PS, 55 mm

Injection Unit .../1330 Screw diameter 55 mm Spec. Spray pressure 2041 bar Injection volume 653 cc Injection weight in hp 594 g L/D Screw Ratio 22 Clamping unit 240/... Clamping force 240 t Size of the clamping plates 910 x 930 mm Lights spar spacing 630 x 570 mm Ejector force 59 kN Tool installation height 350 mm Opening way 725 mm Max. panel spacing 1075 mm Ejector path 200 mm Weight 10000 kg Dimensions(m) LxWxH 5.5 x 1.8 x 2.4 m Year of construction 2013 Control type Unilog B6

Distance between the clamps 630x560 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 200 mm, maximum open travel 1500 mm, 180 Kw, core pull 1, equipped with hydraulic screw drive, documentation, Please note! pick up by appointment, Auction-ID: A1-43992-9

Holmloos, hole centering ring fixed plate Diameter 160 mm, minimum installation height 350 mm, maximum opening (hydraulic) 950 mm, core pull 1, equipped with hydraulic screw drive, documentation available, Please note! pick up by appointment, Fanuc robots not included Auction-ID: A1-43992-21

Distance between the clamps 470x470 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 900 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Attention! Pick up by appointment Auction-ID: A1-43992-18

Distance between the holms 1120x1010 mm, hole centering ring fixed plate Diameter 250 mm, minimum installation height 450 mm, maximum open travel 1400 mm, maximum opening (hydraulic) 2600 mm, core pull 4, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, 189 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-3

Distance between the holms 920x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2017, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-4

steel; connection diameter approx. 90 mm; filling opening approximately 700 mm; equipped with sight glass; total height approx. 760 mm; on 2 pallets without pallets; Auction-ID: A1-43992-212

Distance between the bars 710x630 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1450 mm, core pull 2, documentation, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-11

Distance between the clamps 860x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 900 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, 159 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-2

Holmloos, hole centering ring fixed plate Diameter 160 mm, minimum installation height 350 mm, maximum opening (hydraulic) 950 mm, core pull 1, equipped with hydraulic screw drive, documentation available, Please note! pick up by appointment, Fanuc robots not included Auction-ID: A1-43992-22

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-19

Distance between the strands 1120x1000 mm, hole centering ring fixed plate Diameter 160/200/250 mm, minimum installation height 200 mm, maximum open travel 1400 mm, core pull 2, equipped with electric screw drive, 272 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-5

Distance between the bars 1200x1010 mm, hole centering ring fixed plate Diameter 250 mm, minimum installation height 450 mm, maximum open travel 1400 mm, maximum opening (hydraulic) 2700 mm, core pull 4, equipped with hydraulic screw drive, 249 Kw, documentation, Machine was disassembled, overhauled (Italy) and recommissioned in 2014, Please note! Pick up by appointment Auction-ID: A1-43992-1

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-17

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-20

Key data: 11500 , 6500 , 120

Presse à injecter BILLION 1150 T Type : H10140/1150? Epaisseur min /max moule : 400/1600 mm ?Dimensions des plateaux : 1770 x 1770 mm ?Distance entre colonnes : 1170 x 1170 mm? Course d'éjection : 400 mm? Diamètre vis : 120 mm? Pression max sur matière : 1495 bars? Pression hydraulique maxi : 160 bars? Course ouverture maxi : 1650 mm? Volume maxi injectable : 6766 cm3 ?Longueur vis L/D : 28 ?Capacité maxi injection : 160 mm/s

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

HAITIAN ZHAFIR 230 T Hybrid Injection Molding Machine Type: ZE 2300-830 Closing Force: 2300 kN / 230 T Year: 2015 Screw Diameter: 50 mm Injection Volume: 421 cm³ Injection Pressure: 2000 bar L/D Ratio: 25 Distance Between Tie bar : 620 mm x 620 mm Opening Stroke: 550 mm Mold Thickness (min/max): 220/600 mm Motor Power: 151 kW

KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8

Mastermatic System for Plastic Injection Machines Type: Control and regulation system for injection moulding machines Manufacturer: Mastermatic Operating pressure: Between 50 bar and 200 bar Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-57

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN Distance between tie bars: 320 x 320 mm Platen dimensions: 446 x 446 mm Injection unit (EUROMAP): 250 Approx. shot volume: 106 cm³ Shot weight (PS): 97 g Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW Machine weight: 2330 kg

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

Injection Mold Type: Plastic injection mold Year of build: 2022 Mold Features High durability tool steel construction Reinforced cavity design for large part molding Multi-point injection to ensure uniform filling Optimized cooling system to reduce cycle time Robust ejection system for large plastic parts Designed for high-volume industrial production Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-71

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

1 lifting cylinder is leaking hydraulically driven puller not included Auction-ID: A1-40134-362

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

B&A REF:  9314 TON: 420 SCREW DIAMETER:  70MM SHOT WEIGHT:  1090 STROKE VOLUME:  1212CM3 INJECTION PRESSURE:  1877AR PLATEN SIZES:  1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT:  380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1530MM EJECTOR STROKE:  230MM CONTROLS:  NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

Technical data: • Brand: Fliegl • Type: 18000L pump tanker with trailing shoe distributor • Year of manufacture: 2011 • Buffer capacity: 18,000 litres • Tyre size: 750/60 – 30.5 • Trailing shoe distributor (Bomech): 7.2 m • Slurry cultivator (Fliegl Rasant): 7.2 m • Net weight: 1,150 kg (trailing shoe distributor) Overall dimensions (approx): • Length: approx. 8,500 mm • Width: approx. 2,800 mm (transport width) • Height: approx. 3,500 mm Pump: Vogelsang LS 360 Rotary Lobe Pump • Serial Number: 3479 • Year of construction: 04/2009 Control: • Electric/hydraulic via operator terminal in the tractor cab • Control of pump, suction nozzle, auger, flaps and sliders • Vibration counter: 2,309.39 h • Dual rear cameras Distributor: • Bomech trailing shoe distributor with disc injector technology • 36 hose out ...

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...

Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)

Injection moulding machine ENGEL/ FERROMATIK, vacuum pumps, controls, cables, fittings, volume without shelves, room area approx. 30 m²

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Injection moulding machine ENGEL Duo 2550/500 built in 2014, S/N 199222, clamping force 500 t, displacement max. 1,155 cm³, screw 80 mm, clamping plates 1,200 x 1,200 mm, opening travel max. 750 mm, weight 14,000 kg, control Engel CC200, cascade control, 20 registers, linear robot Engel Viper 20, device no. 199229, built in 2014, machine 153, with suction conveyor PIOVAN T20M, conveyor belt 3,000x800 mm

Belt width: 260 mm, Description: Including add-on tenderiser of 104 knives, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg

Plastic injection moulding machine ENGEL Victory 200/50 Spex year 2014 22,934 Bh (02/24), S/N 197648, weight 2,900 kg, clamping force 50 t, displacement 69 cm³, screw 25 mm, clamping plate 500 x 300 mm, opening travel max. 200/400 mm, control Engel type CC300, handling system Engel Viper 6, device no. 197664, internal machine 150, plus 2x suction conveyor PIOVAN C10, belt conveyor belt SCHOLZ ASP 3000/500 as well as 1 pc. manufacturer not recognizable approx. 2,500x500 mm

Injection moulding machine FERROMATIK MILACRON EUROPE EE155 Year 2007 83,562 Bh (19.03.25, 25.03.26), Masch.-Nr. 427088, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control Mosaic, internal FERRO2, not yet connected after purchase

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

Injection moulding machine FERROMATIK MILACRON EUROPE Elektra EE 155 Evolution Year 2007 65,542 Bh (19.03.25, 25.03.26), Masch.-Nr. 427099, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, machine 7.4 t, internal FERRO1, CNC control MOSAIK, not yet connected after purchase

This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.