138,016 used machines on RESALE, but how to find them? Machine Search
Key data: 450 mm, 63 , 25
Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only
Key data: 1500 kN
Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 09.2012 Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Control with air valve Core train control Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubri ...
Sell some machines from our warehouse
Key data: 1600 kN
Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the ...
Key data: 1600 kN
Arburg 520S 1600-290/100 / Production line with the Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air Valve x 3 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying Machine with two cylinders / ...
A curing injector from Günther is sold Type: PI 17 Year of construction 2016 Capacity: approx. 300 to 500 kg/ hour Equipped with 17 needles in 2 rows, needle size (standard) approx. 4.0 mm The injection quantity is infinitely variable from 2 to 25 % Machine is in very good condition and ready for immediate use Price from stock 6000€ net
1) Vertical Rubber Molding Machine Manufacturer: Rutil Model: 2000/250 RS SX-F Stations: 1 Clamping Force: 500 Ton Heating Platens Dimensions: 520x650 mm Max Shot Volume: 2000 cc Max Daylight: 450 mm Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine / NEEDS REPAIR - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine NEEDS REPAIR - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x50 ...
Key data: 700 kN, 132 g/PS, 35 mm
Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes
Key data: 2000 kN
Arburg 570H 2000-400 e² / Hybrid machine / Production line with the Wittmann W823 robot / Operating hours: h in automatic mode Year of manufacture: 07.2016 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inver ...
Key data: 2000 kN
Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp It is possible to buy a turntable for an extra charge Dimensions: Weight: 7300 kg All offered machines are started by our service technicians before they ar ...
Key data: 2200 kN
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...
Key data: 2200 kN
Arburg 570C 2200-1300 / Hybrid machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Injection weight: 469 g Spray pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All offered machines are started by our service technicians before they are sold ...
Key data: 2000 kN, 240 g/PS, 45 mm
Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard
Key data: 2500 kN
Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X- ...
Key data: 3200 kN
Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustm ...
B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Key data: 800 kN
Sumitomo Demag Systec 80/420-310 with the Wittmann W818 robot Year of Make: 2015 Injection unit: Screw diameter: 30 mm Injection weight: 103 g Spray pressure: 2755 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Built-in printer Robot Wittmann W818 Year of Make: 2013 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1000, Z-1500 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4000 kg Length/Width/Height: 4.10x ...
Karpowicz injector -Type: NK-27 -Power: 7.5 kW -Capacity: up to 1500 kg/h -Power supply: 400V 50Hz 3N -Belt width: 400 mm -Needle diameter: 2 mm -Number of needles: 27 -Dimensions: 1800 x 880 x 2100 mm -Weight: 300 kg -Made of acid-resistant steel -Quantity in stock: 1 -Condition: used/overhauled
Key data: 805 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...
Key data: 5000 kN, 80 mm
KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
closing pressure:6600 kN weight of the machine ca.:45,5 t
Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - .ucymachines/ Contact us at - sales@ucymachines
screw size:60 mm closing pressure:3500 kN total power requirement:193 kW weight of the machine ca.:25,5 t dimensions of the machine ca.:7,65 x 3,65 x 3,95 m
Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg
Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007
DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157 ...
Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002
Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...
Injector PSM 24 Dorit Number of needles: 24 Number of needle heads: 1 Needle diameter: 4mm Strokes per minute: 48 Max product height: 200mm Max capacity per hour: 800-1200kg Voltage: 400V / 50H Dimensions - packed: 130 x 85 x 210cm
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
BRINE INJECTOR WITH FILTER UNIT, STORK PROTECON TYPE: PI-92-100 Technical description: Serial number: 576 Number of needles: 92 Filter: Ø 0,2 mm Clearance: 400 mm Power supply: 380-440 V/50-60 Hz Filter unit dimensions: 1400 x 430 x 900 mm Dimensions: 2300 x 900 x 1700 mm
SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m
Key data: 3500 , 70
SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg
Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot There is an issue with the monitor. Monitor board needs replacement. Find more here - .ucymachines/ Contact us at - sales@ucymachines
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
Description SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Clamping force : 40 T Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table 1 core pull 4 heating zone
Key data: 1000 kN, 172 g/PS, 40 mm
Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x
Key data: 2500 , 60
ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot
Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.
SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage
Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye
Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
maximum number of results exceeded
please refine your search
