steam heater used for sale

Cartridge heater, heating element, 4 pieces EWD 500 W 220 V diameter: 20 mm length: 200 mm cable length: 2x 100 mm, with screw lugs New ! Dimensions ( packaging ) : 350 x 50 x 50 mm

Cartridge heater, heating rod, 3 pieces EWD 600 W 220 V diameter: 20 mm length: 250 mm cable length: 2x 100 mm, with screw lugs New ! Dimensions ( packaging ) : 400 x 50 x 50 mm

Cartridge heater, heating rod, 13 pieces EWD 150 / 200 / 250 W 220 V diameter: 20 mm 10x 150 W, length: 63 mm 1x 200 W, length: 100 mm 2x 250 W, length: 100 mm cable length: 2x 100 mm, with screw lugs New ! Dimensions ( packaging ) : 180 x 80 x 90 mm

Cartridge heater, heating rod, 10 pieces EWD 160 / 200 W 220 V diameter: 16 mm 5x 160 W, length: 125 mm 5x 200 W, length: 100 mm cable length: 2x 100 mm, with screw eyelets New ! Dimensions ( packaging ) : 200 x 150 x 80 mm

Cartridge heater, heating rod, 18 pieces EWD 100 / 125 / 160 W 220 V diameter: 13 mm 5x 100 W, length: 65 mm 4x 100 W, length: 100 mm 6x 125 W, length: 83 mm 3x 160 W, Length: 100 mm Cable length: 2x 100 mm, with screw lugs New ! Dimensions ( packaging ) : 200 x 150 x 80 mm

Piston pump with heating, without drive PAGUS X257 832 073 Rod diameter: Ø 40 mm Rod thread ( inside ): M18 x 1,5, Depth: 60 mm Female thread ( outlet ): 1 ( inch ) Flange diameter ( input ): Ø 180 / 82 mm bolt circle diameter: Ø 155 mm 6x Bore: Ø 9.5 mm Heater: 0.4 kW, 220 V AC used, repaired ! Dimensions: 635 x 190 x 190 mm

Screw conveyor with heater and nozzle PAGUS screw conveyor: Diameter: Ø 36 mm pitch: 36 mm length: 580 mm Material: stainless steel drive: spline shaft profile, Ø 28 mm, 4 wedges length: 80 mm nozzle diameter: Ø 5 mm 2x liquid heater 4x electric heater: ETB KZ 8601 1.6 kW ( 4x 0.4 kW) 220 V AC screw conveyor housing: Ø 80 mm Mounting thread: M64 x 2.0 New ! Dimensions: 770 x 140 x 115 mm

T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204

Ceiling air heater, heat exchanger ILKA, MASCHINENFABRIK Nema type P12 TGL 180-1100 Operating pressure: max. 19 kp/cm² ( approx. 19 bar ) Heat exchanger: 410 x 340 x 115 mm Connection diameter ( inside / outside ): Ø 27 / 34 mm without fan Material: Steel, galvanized, painted New ! Dimensions: 500 x 310 x 440 mm

Ceiling air heater, heat exchanger, with fan ILKA, MASCHINENFABRIK Nema type P20 TGL 180-1100 Operating pressure: max. 19 kp/cm² ( approx. 19 bar ) Heat exchanger: 550 x 450 x 190 mm Connection diameter ( inside / outside ): Ø 27 / 34 mm Fan: Impeller: Ø 240 mm Motor: VEM KMO 56 G 6 0,12 kW 870 rpm 220 / 380 V 3AC 50 Hz IP44 Material: Steel, galvanized New, with underlays ! Dimensions: 850 x 460 x 560 mm

Output: 3000l/h, pasteurizing process: flash pasteurizing.

There are two Multi-Purpose Heaters Juwo available, capacity tank 1/2: 3000/2500l, with documentation.

Immersion heater -Power: max. 2000 W -Step switch: 12 positions -Body: made of aluminum -Connection: 230 V -Weight: 5 kg

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Thermal system, fan heater -Space-saving fan heater: HVL 031 -Power: 225 W -Price: per piece -Number: 2 pieces -Dimensions: 90/130/H160 mm -Weight: 0.9 kg/piece

Scope of delivery possible. Please use Enquire about postcode and city VAT not deductible

Hall heating with oil burner

1 piece of used heating container (in need of repair / defective) Built in 1992 Manufacturer: Weho Heating medium: Fuel oil Defects: 1. Steam boiler leaking 2. Heating coil hot water leaking. 3. Ignition transformer defective. Location: Chemnitz Available: IMMEDIATELY Price on request Offers and prices are net ex location Subject to prior sale, Errors and/or misrepresentations excepted, without guarantee and/or warranty, Sale takes place in the ACTUAL state

Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Cartridge heaters, immersion heaters HELIOS AB-No.: 20212229 Art. -No.: 01024024 3000 W ( 3 kW )qqq 230 V AC 3 heating elements immersion depth: 330 mm thread: 2 inch wrench width: 70 mm New ! Dimensions: 460 x 90 x 70 mm

Electric air heater, electric air heater MAICO DRH 16-5 DN 160 power: 5,0 kW ( 5000 Watt ) voltage: 400 V 2AC frequency: 50 Hz current consumption: 12.5 A volume flow: min. 110 m3/h throughput speed: min. 1.5 m/s used, tested ! Dimensions: 375 x 170 x 245 mm

Electric air heater with centrifugal fan VOLTA Type ERRG 10,0 kW 400 C 3AC flange ( inside / outside ): 480 x 300 / 520 x 340 mm centrifugal fan: DIETZ MOTORS type DN 16 Q fan wheel diameter: approx. Ø 160 mm V: max. 26 m3/min Ps: 0.0.0 m3/min. 9 kPa motor: 0.9 kW 2880 rpm 230 / 400 V 3 AC 50 Hz IP54 intake connection ( inside / outside ): Ø 120 / 135 mm outlet flange ( inside / outside ): 135 x 135 / 180 x 180 mm used, tested ! Dimensions: 620 x 400 x 640 mm

Description: Lot composed of approximately 50 gaskets for YANMAR air heater - art. 129100-77510 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 3 kg

Heating elements / heating rod for quail stove New( 4 pieces )Material :Ceramic715 / 630 mm230 Volt / 250 WattFor details see picture

Heating elements / heating rod for quail stove New( 4 pieces )680 / 630mm230 Volt / 250 WattFor details see picture

Heating elements / heating rod for quail stove NewCeramic( 4 pieces )715 / 630 mm230 Volt / 350 WattSee picture for details

Heating elements / heating rods NEW( 4 pieces )for MIWE furnacePower : 250 WSpannung : 230 Vgestr. Length : 1350 mmof which unheated : 2 x 100 mmTube diameter : 8.5 mmPipe sheath material : 1.4571 / AISI 316 TiConnection : Thread M4Closure : SiliconRHK bent : U-shape center-center 60mmFastening: angle plate 84 x 21.5 x 8 mmFor details see picture

Description: Heater for injection moulding machines Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 2,200 mm, weight approx.: 500 kg

Heating output: 140 kW, heating output switched in 4 stages of 35 kW each, air volume flow of 6500 m³/h, air speed of 9.8 m/s, stainless steel tubular heating element (1.4828) with a surface load of 3.9 W/cm², inlet temperature: approx. 20°C, outlet temperature: approx. 160°C, temperature sensor PT100, EC declaration of conformity. Two identical air heaters are available, with documentation, the heaters are still unused, an on-site inspection is possible.

in stainless steel sliders, t-pieces, flanges, etc. Price piece: from EUR 80,00 Pipes available approx. 800m Price /m: from 40,00 by DN 50 - DN 120 various steam control valves Price piece: from EUR 180,00

Wolf cooking kettle with mixing work steam-heated approx. 800 to 900 litres of volume outlet DN 100 at the side

a top-class convectomat, hot air damper / convectomate/ combi damper / CombiMaster , gas-heated, 50-250C. External dimension: 1240x960x1400mm, internal dimension: 620x640x830mm with stikken trolley for 10xGN2/1. Electrically controlled, 400V, 0.3kW. Good condition.

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

The steam humidifier Defensor Mk5 is a pressure steam generator. It works on the principle of resistance heating. It is designed to directly (with ventilation) and indirect (corded steam distribution) humidifying of the air in conjunction with ventilation systems and air conditioning. Parameter Air Fan: Voltage: 200-240 V 50/60 Hz power consumption = U: P 26 W = maximum steam output: 16.0 kg / h Parameter MK5 Visual VE 8: 400V/3/50-60Hz, 6.1 kW

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

Product number: 920 Year of construction: 2005 Belt width: 700 mm Belt length: 15000 mm Power: 3 x 400V, 50Hz Dimensions: 15000 x 2100 x 4150 mm Siemens control panel

Complete and functional evaporation system. Sold on behalf of the customer Simply report if you have any questions; ready to use

Steam turbine Type: B + V, MARC2 - B10, back pressure with extraction Live steam pressure 58 bar 60.5 bar max Live steam temp.: 510 ° C Steam quantity: 45 t / h Extraction pressure: 21 bar 24.0 bar max Extraction temp.: 383 ° C 490 ° C max Extraction quantity: 7 t / h t 15 / h max Exhaust pressure: 3 bar 4 bar max Exhaust temp. : 180 ° C 262 ° C max Exhaust quantity: 28 t / h 47 t / h max Speed: 10.043 RPM Quick closing speed: 11,047 RPM Gearbox Generator Manufacturer LEROY SOMER KV voltage 5.25 Frequency 50 Hz Speed of 1,500 RPM maximum 1,800 RPM Power: 9,000 kVA Power factor: 0.8 Year of construction 2005 Operating hours: 16,000

1 SUPERBA steaming and shrinking machine type UNIVAP year 2001 machine runs 10 independent conveyor bands through one central steaming chamber never commissined (0 running hours)

High-pressure steam cleaner

Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!

Press-Vite Buegel / Steam table 4 whirlpool hoods, 9000W Bj .2002, Pr12LP+ You buy a bell system Press Vite Buegel- / Steam table,with 4 hoe-adjustable whirlpool hoods, and 2 steam generators /en working width approx. 340 cm, 380VPr12LP - 9000W Bj 23.10.2002 Control GE VAT20 U20NOK7S BJ. 16.02.2002 Article number 17746; Please include requests;

Convotherm Hot air damper OES6.06 Table unit, capacity:6 x 2/3 GN flexible Bays:7 x GN1/1 or 14 x GN1/2 with memory for 250 recipes. Crisp&Tasty Disappears ür chrome nickel steel. Connection value: 11.4 KW New price:5.250,-€

Dresser Rand/Nadrowski condensing steam turbine B5S-6+G -SN 21124 from 2007 never used zero running hours for sale. Scope of supply: control pannel, generator, documents. turbine: Dresser Rand / Nadrowski type: B5S-6+G - SN 21124 el. power: 2600 KW running hours: Never used / sure plus steam consuption: 14,7 to/h at full load steam inlet pressure: 39 bar inlet steam temperature:397°C manufactured: 2007 generator: Indar type: BZK-630-S/4 powerrating: 3.575 KVA volts: 3.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Combination damper Convotherm OSP6.10 in a very good used and functional condition. 6 bays 1/1 GN, door with lateral sliding function (inchVerschwindetürinch), core temperature sensor, effervescent, electronic control and much more. 3 x in stock. Dimensions W/D/H 103/80/70 cm. Connection values 400 volts, 9-11 kW. Workshop-tested, ready for immediate use. More on request.

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Price on request. FCA free loaded in our warehouse. One second hand Siemens Twin AFA 46 condensing steam turbine manufactured in 2009 for sale. turbine: Siemens type: Twin AFA 46 el. power: 3.300 KW running hours: steam consuption: steam inlet pressure: 26 bar inlet steam temperature:400°C manufactured: 2009 generator: AVK powerrating: 4.125 KVA volts: 6.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 0049/1635263546 Telefon: 0049/ 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Complete Boilerhouse with 18 bar FR+K, Bay boiler with a steamproduction of 2500kg/h. The burner is a Weishaupt with a capacity from 1845KW The boilerhouse is complete with stack, feedwater tank, water softener and reversed osmose installation. year of manufacturing 1996. The installation is stil in full operating modus in Germany.