steam boiler used for sale

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

537 KW Tuthill Nadrowski back-pressure steam turbine C4. S-GIII from 2004, only turbine (was used as a pump). 1 available inlet pressure 90 bar, outlet pressure 18 bar, Price: € 19,500 each, plus VAT and FCA-free Manufacturer: TUTHILL Nadrowski Model: C4. S-G III Type: Steam Back Pressure Serial Number: 21004 Power [kW]: 537 Pressure inlet [bar]: 90 Pressure outlet [bar]: 18 Speed (rpm) 3.554 Year of construction: 2004 Weight [kg]: 2.440 Dimensions LxWxH [cm]: 370x138x174

1 ARIOLI continuous steamer / ager type Mini G, year 2001, roller width 220 cm, working width 200 cm, inside fabric capacity 130 m

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

We are selling here a combi steamer from the manufacturer Rational, type CM 102 in a very good used and functional condition. The device runs on 400 volts, 37 kW, built in 2010, 2 x 10 1/1 GN plug-ins, core temperature sensor, dishwasher spray, for cooking, cooking, regenerating, baking, etc., workshop tested, immediately ready for use, dimensions W/D/H 107/100/105 cm, others on request.

Ansaldo Condensing Steam Turbine Power: 9000 kW RPM: 7500 / 1500 Steam pressure: 40bara Steam temperature: 420 ºC Back Pressure: 0,08bar Number of extractions: 2 Number of stages: 8

BVI / ThyssenKrupp Condensing steam turbine MARC6-C03 2005 power generator with 135,000 operating hours, without steam condenser and AC generator. Inlet pressure 89 bar, outlet pressure 0.11 bar, 21,000 KWel x 1,500 rpm, Steam turbine BVI / ThyssenKrupp MARC6-C03 Manufacturer: BVI / ThyssenKrupp Model No.: MARC6-C03 Type: Steam Condensation Serial number: P-900078 Power [KW]: 23,545 Pressure Input [bar]: 89 Temperature Input [°C]: 520 Pressure output [bar]: 0.11 Year of Make: 2005 Hours: 135,000 Weight [kg]: 58,000 Dimensions LxWxH [cm]: 510x400x340

Bell Steam Trap ARMSTRONG Type 1811 Stainless Steel DN20 PN40 P max 8.5 bar Connection: ND40 - NW20 / 26.9 Dimensions: 210 x 150 x 150 mm

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Combi steamer Eloma Model Multimax B 10-11 Cooking function, hot air and steam 11 Racks GN 1/1 Stainless steel Connection: 400V, 17.1 kW, 32A-CEE plug Approx. dimensions: 925 x 810 x 850 mm, WxDxH Occasion

3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

Steaming Machine Capacity 150 m Width 2200 mm

We are selling here a combi steamer from the manufacturer Rational, type SCC 201 in a very good used and functional condition. The device runs on 400 volts, 37 kW, built in 2005, tray trolley with 20 x 1/1 GN, for cooking, frying, regenerating and much more, core temperature sensor, programmable, workshop tested, immediately ready for use, dimensions W/D/H 90/80/180 cm, others on request.

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Stepless heat setting, for smoothing wrinkles

Steam generator Manufacturer Beckermesser Type BM 2090 Operating pressure 4 bar Boiler heating 9 kW/h Steam capacity approx. 13.5 Kg/h Water capacity approx. 9.8 litres Documents available

Steam generator Manufacturer Beckermesser Type BM 2090 Operating pressure 4 bar Boiler heating 9 kW/h Steam capacity approx. 13.5 Kg/h Water capacity approx. 9.8 litres Documents available

Pure steam generators Manufacturer Stilmas Type PSG 50 /DTS Clean steam volume 0-max. 50 kg/h at pure steam pressure 3 bar or pure steam volume 0-max. 100 kg/h at pure steam pressure 1 bar The process guarantees the production of dry, sterile, pyrogen-free, pure steam that is free of particles or metal bions.

Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible.

VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V ? 50 Hz Capacity: 2 baskets Internal diameter: ? 1227 mm Outer diameter: ? 1284 mm Height: 1300 mm

Stock number: D1112, Electric steam generator,, Dampheks 1 DH type 1A 39., 39 kW., Capacitet 52 kg steam/hour at 6 bar., Condensation container and, feed pump excluded.

Combi Steamer Rational SCC101G for 10×1/1 GN, Natural Gas, can be set to LPG, 230 V, 39 kW, 1.7 A, core temperature, steam, fan speed programmable, 1/2 energy, cool down, self-cleaning, and much more, incl. manual, dimensions 85x77x102 cm, suitable substructure 2367

BWT VT2000 Pure steam generator Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock

Mueller P7505 Pure steam generator Serial: 394131-1 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph

Height=1.87 m, Overall length= 0.87 m, Overall width= 1 m, Net weight= 205 kg,

Turbine power 330 kW at 1.35 bar and 170°C including exhaust gas heat exchanger

Turbine power 294 kW at 1.35 bar and 170°C including exhaust gas heat exchanger

Siemens steam turbine 3,370 kW nominal output. Speed: 11,500 r/min, live steam 80 bar, live steam 500 °C.

A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible.

steam turbine RATED POWER 1824 KW SPEED 8490 1/min pressure 19,5 bar abs exhaust pressure 0,56 bar

Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry Steam Cleaner Vapor pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

1 gebr. Rapid steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Heat output : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of construction : 1996 Heating coil year : 10 / 2023 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

12mw steam turbine major overhauled end 2022 only runs for 1 year till end 2024

For sale are 2 Veit electric steam stations 60 KW Unit price 1.450 €

An electric rapid steam generator made by Jumag is offered. The steam generator has run little and is in good condition. Technical data: - max. permissible Pressure PS 12.5 bar - Test pressure PT/PP 32bar/24bar - max. permissible Temperature TS: 200°C - Max. electric heating power: 100 kW - Weight: 395kg For more data on steam output, etc., see the pictures.

Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700

Height=1.84 m, Overall length= 0.92 m, Overall width= 0.88 m, Net weight= 246 kg,

Type: STS600/8/130 Serial number: 60 Year of construction: 1999 Belt width: 600 mm Tiers: 2 x 4 pc. Belt length: 60 m Product gap: 130 mm Retention time: 2.9 - 29 min Steam: NW40, 4 - 8 Bar Exhaust: 2 x 2000 m³/h Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 27kW Dimensions: 9200 x 3900 x 4700 mm Weight: 13500 kg Including continuous belt washer

Height=0.8 m, Overall length= 0.83 m, Overall width= 0.85 m, Net weight= 102 kg,

Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Manufacturer: Matachana Model: 1006-2 Year of Manufacture: 2018 Volume (Vol. I / Vol. II): 44.5 L / 66 L Maximum pressure (PSmax): 3.0 / 3.0 bar Minimum pressure (PSmin): -1 / 0.0 bar Test pressure (PT): 5.4 / 7.2 bar Test date: 05/11/2018 Fluid group: 2 – Water / Steam Temperature range (TS min/max): 5 °C / 150 °C Find more here - / Contact us at -

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

FOR SALE steam turbine year 1997

Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available -Price per piece -Dimensions Ø 372 x 660 mm -Weight: 7.6 kg