steam boiler 4 used for sale

Bitzer Screw Compressor NEW Type HSK 7471-90-40P Stroke volume 250cbm/h 90 hp electrical power. New

Description mobile height-adjustable Gura scissor roller conveyor 1200-425 2KUX from year 2009 Scissor roller conveyors are used in all areas of general cargo transport in operation. Especially when a permanently mounted system is not desired, this mobile variant is used. Own logistics structures can thus be optimally adapted and expanded as desired. The tracks are individually adjustable in length and height, at the same time curves up to 180 can be formed. – gloss-galvanized version – web top edge from 720 – 1150 mm height-adjustable. – For conveyed goods up to 425 mm – Axle distance with extended web 150 mm. – Rollers ( 50 mm) ball bearing on 8 mm axes – End stop at the end of the roll Number of support feet 3 pieces (+one extension) Web length 1600 – 5500 mm Load capacity/support foot distance 100 kg Roll material Plastic Rolls per axle 2 pieces Roller design Plastic

Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386

Cooling water pump for MWM 484 on an exchange basis

Cooling water pump for MWM 348 and 484 on an exchange basis

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed

RECON Part number: 1221 2179 / 6.441.0.150.900.7 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

used Foodwaste shredder with gearbox and engine 11 kw blades 18 mm 2 hooks

Koppens” contact cooker Type BG 6000/400 continuous teflon belt grill all stainless steel suitable for thermo oil heated with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 6000 mm belt width 400 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed)

RECON Part number: 1217 0142 / 6.440.0.170.006.4 ---------------------------------------------------------------------- ---------- Note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves. For further questions we are gladly available!

Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...

RECON Part number: 6.440.0.170.036.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1217 4397 / 6.441.0.170.057.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

RECON Teilenummmer: 1217 4401 / 6.441.0.170.067.4 B side ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RECON Part number: 1217 4412 / 6.441.0.170.018.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

TFT replacement monitor for MAHO machines with Philips control CNC 432 2 year warranty!; New

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

RECON Part number: 1217 4413 / 6.441.0.170.019.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Panda WV 4500 B Suction plugs: 4100 m3/h Vacuum: Pre-pump output Gewawting capacity: 12 months Status: as good as new, reserve device; ready for use

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

Built in 2001 ; working condition

The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...

Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use