steam boiler 4 used for sale

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Key data: 439 , 1500

Engine is a general-overhaulted exchange engine with 12-month guarantee. 1x at stock one available. MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven Germany Tel:0049 (0)4281-950583 Fax:0049 (0)4281-950585 email:info@miw-zeven.de abc.miw-zeven.de

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Cat. No. 13-0044 in a very good condition Typ: BN 3101 131 424 Testing water by 22°C back pressure at 1 bar Pressure: 1,1 bar capacity: 10.800 litres/h Motor: 1,8 kW Connection: inlet/outlet: DN 65 according to DIN 32676 can be changed on request for an additional charge Measurements: length: 96 cm width: 33 cm height: 100 cm weight: 84 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

used, kpl. 1 year warranty, plate size 470 x 470 mm, 11 plates, closed outlet, 45 mm cake thickness, pressure 8/10 bar, capacity approx. 75 liters, filter area 4m2, dimensions 2000 x 700 x 1100 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

BAP prism light weight L = 1260 B = 325 height 93 mm. = energy-saving reflector only 1x36W VVG. Orginalverpackt, unused, remaining stock. Sale. For OWA ceilings, false ceilings. Info under 0170 / 2204056 E-mail at fa.raupp@t-online

6 feeders

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 150 liters, filter area 13m2, dimensions 3000 x 1200 x 1200 mm, weight 1.2 to, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

Div. fuses z.B Lindner new product for 30% reduction 6 PCs. original packed to 50.-NET. Others on request. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Why produce the smallest parts on large, expensive CNC machining centers when it handles a small CNC machine for a fraction of the price just as quickly and massively ? On this machine, an unskilled worker can insert and unmount the factory quilts ! You can reduce your own costs from 250 Euros to 40 Euro Hourly Rate for Small Parts production and thus be much more competitive ! DIN ISO G-Code Programming or data output of the Fraesbahnen 2D or 3D directly from the software. You reduce your operating costs extremely. Also available with rotary axis ! Several companies produce extruder screws, 3D molded parts made of aluminium, small parts made of brass or stainless steel for injection moulding plants, etc. for your production. We would be happy to advise you on brass, copper, steel, stainless steel and many other materials can be processed. view informations and obtain non-bind ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

NERI DL400 self-adhesive labeller for bottles etc., with two labelling heads, suitable for bottles from 80 to 180mm diameter/width and from 30 to 120mm high. Output up to 100 containers per minute, all stainless steel construction.

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

BAP mirror Louvre luminaire dimensions L = 1260 B = 325 height 93 mm. = energy-saving reflector only 1x36W VVG. Asymmetrical light distribution for cabinet wall. Orginalverpackt, unused, remaining stock. Sale. For OWA ceilings, false ceilings. Info under 0170 / 2204056 E-mail at fa.raupp@t-online

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the desired size to be output and have milling paths calculated. This created file is therefore opened in the KinetiC-NC control software of the machine and is therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned m ...

Rastereinlegeleuchte