steam boiler 4 used for sale

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...

Disc sander, disc grinder, disc sander, edge sander, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

bearing diameter: 120 mm motor: Synchronmotor Nominal turning speed: 3000 1/min Maximum turning speed: 4000 1/min Torque: 76,4 Nm current: 38 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg

New Part number: 526 070 12 01 EX52607300010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 8.3 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 700/210/H300 mm -Weight: 41 kg

New X52407500024 X52407500050 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

turning diameter over bed: 435 mm turning diameter over slide rest: . mm turning length: 750 mm turning speeds: U/min digital readout: digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 4600-700-600 RA2243 Technical data: Conveyor length (NL): 4600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spee ...

Transnorm conveyor belt GF 4700-700-600 RA2208 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s ...

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Diesel forklift hook, front forklift hook, gallows, forklift crane -Load capacity: 4000 kg -For: 600 mm sign -Mast height: 1620 mm -Length to hook: 1200 mm -Arm length: 1300 mm -Dimensions: 1300/1080/H1740 mm -Empty weight: 300 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Recon Part number: 002 180 34 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

As good as new Part Numbers: 524 020 36 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Professional file shredder from Ideal

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 290/150/H190 mm -Weight: 10.3 kg

As good as new Part number: 524 020 37 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 1x package available -Weight complete: 15.6 kg

As good as new Part number: 524 020 38 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Milling machining center CNC Hedelius Tiltenta T7-4200

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 1x package available -Price: per package -Weight complete: 15.6 kg/package

PLC control, digital output -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 451-7LA11 -Number: 5 modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 430-7LA11 -Number: 4x modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

As good as new Part number: 524 020 39 05 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x Workbench stand, used Material colour: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm Clear width: 2,300 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: - The images are used to illustrate the material. - The material color may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3-5 working days. You are also welcome to purcha ...

Transformer, converter, inverter, three-phase autotransformer -Type: 4AV4074-1JA -Technical data: see images -Dimensions: 75/120/H130 mm -Weight: 1.1 kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Input: 3 PH 380-460 V - 50/60 Hz -Output: 3 PH : 380/460 V -Number: 1x converter available -Weight: 4.1 kg

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extr ...

Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg