steam boiler 4 used for sale

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 385/207/H225 mm -Weight: 12.8 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg

Commonrail Pump Used from experimental setup. Few hours

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic 6ES7 141-4BF00-0AA0 -Number: 1x available -Price: per piece -Dimensions: 140/70/H70 mm -Weight: 0.2 kg

PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic 6ES7 194-4CA00-0AA0 -Number: 1x available -Price: per piece -Dimensions: 140/70/H70 mm -Weight: 0.35 kg

PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic S7 6ES7 194-4CB00-0AA0 -Number: 1x available -Price: per piece -Dimensions: 140/70/H70 mm -Weight: 0.35 kg

Solenoid valve, pressure reducer, pressure regulator -Manufacturer: Wabco -Type: 4721950047 -Connection thread: M22x1.5 -Price: per piece -Quantity: 1 available -Weight: 0.7 kg/piece

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Key data: 1300 , 40

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

V-belt pulley, belt pulley -Diameter: 460 mm -Total width: 265 mm -Straps: 10 -V-belt width: 22 mm -Take: Ø 160 mm -Number: 1x pulleys available -Price: per piece -Weight: 78 kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.

V-belt pulley, belt pulley -Diameter: 480 mm -Total width: 240 mm -Straps: 9 -V-belt width: 22 mm -Socket: Ø 124 mm -Pulley: balanced -Weight: 95 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO CNC no. of strokes: 32-800 Hub/min total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

Geared motor, electric motor, three-phase motor -Speed: 12 rpm -Power: 1.1 kW -Design: B3 angle -Hollow shaft diameter: Ø 35 mm (shaft Ø 35 mm) -Dimensions: 510/220/H300 mm -Weight: 33 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 22 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 530/330/H260 mm -Weight: 51 kg

Gear motor, electric motor, electric gear motor -Speed: 132 rpm -Power: 0.37 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 455/230/H220 mm -Weight: 30 kg

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Fan, fan, electric motor, blower -Speed: 1360 rpm -Fan diameter: 500 mm -Hole circle: 540 mm/holes Ø 9mm -Quantity: 1x fans available -Dimensions: 565/565/H170 mm -Weight: 14kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition

more available DIGI Fully Automatic Stretch Film Packaging Machine Type AW-5600 or AW 4600 Year of construction div. We will be happy to provide you with a package price offer if you accept several machines!

Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg