steam boiler 4 used for sale

Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...

Clamping angle, clamping aid, -Clamping angle for: workpiece clamping -Thickness: 31/40 mm -Bores: Ø 13 mm -Thread: M12 -Price: per piece -Number: 2 pieces -Dimensions: 475/195/H195 mm -Weight: 52 kg

Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm

S. No.: 238828

BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item Condition: Used H2R3C11_2_RD

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm -Number: 2x available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Product number: 2809B Type: BR2000/400 Serial number: 555 Year of construction: 1987 Belt width: 400 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric Power: 3 x 380V, 50Hz, 45kW Dimensions: 5000 x 1200 x 2750 mm Weight: 1150 kg Hold down belt, circulation pump, sediment removal, manual hoists, prepared for CO2 fire extinguisher With separate infeed conveyor

Turbocharger for MTU Engine 4000 Series Unused from stock. There are several Different Types

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Stick electrodes, welding electrodes 2.5 x 290 -Type: 4221 -Price: per package -Number: 2 packages -Weight per package: 5.1 kg

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Recon Part Number: SEV1X Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function:single acting -Piston diameter: 90 mm -Piston rod: Ø 55 mm -Eye diameter: Ø 35 mm -Stroke: 490 mm -Number: 4x available -Price: per piece -Dimensions: 820/110/90mm -Weight: 22kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm/405 x 305, Ø 250 mm -Material: sheet steel -Dimensions: 1255/440/500 mm -Weight: 30 kg

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

Three-phase motor with 2 speeds, electric motor -Power: 4/12 kW -Speed: 980/1470 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -pole-reversible -Protection class: IP 44 -Dimensions: 630/460/H320 mm -Weight: 129 kg

Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg

Description Specifications More details Documents Interroll runway 1.65m with drive The Interroll runway element is in very good condition. Furthermore, the runway has its own drive motor Series: 5600 Width: 410mm Length: 1650mm Pitch: 75mm Loading capacity: 200kg per meter Drive voltage: 400Volt Complete closure of the plant, large selection of mezzanine floors, pallet racks, shelving racks, paternosters. High Quality Industrial Machines, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Power: 900 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Tank: approx. 1100 liters Subject to prior sale - errors possible Internal Reference Number: E-1004-65

Pester Pewo Pack 450 with shrink tunnel further information on request

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Stack electrode 4.0 x 350 -Type: 4370 W -Weight: 4.7 kg

32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • 2 infeeds: For cartons and bottles • Sealing width max. 440 mm • Insertion length 60-360 mm • Insertion width 60-200 mm • Insertion height 30-165mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

NILPETER FA4 – 430mm / 8-color FLEXO  Age: 2012  Max web width 420mm  Max print width 410mm  8x UV Flexo station  Unwinder  Rewinder  1x Rotary Die Cutting Section  1x Rotary Hot-Stamping Section  1x Cold Foil Station  1x Corona  1x turn bar  1x lamination station  Tool list

Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available -Weight per package: 4.5 kg

Type: Special 410 CSO Machine No.: 97213 Year of construction: 2012 Weight: 530 kg Dimensions LxWxH: 700x1400x1550 mm Band dimensions: 3010x27x0.9 mm Motor power: 0.9 – 1.6 kW Engine revolutions: 700 – 1420 rpm Cutting speed: 38-77 m/min Cutting capacity: see picture Cutting thickness: 1.2 mm Height of clamping jaws: 150 mm Length of jaws: 210 mm Height of the worktop: 950 mm Clamping force: 400 kg Accessories 3x Band saw blades: 3010 x 27 x 0.9 mm (Z 6/10)

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg

Micrometer, micrometer screw -Measuring range: 400 - 500 mm -Also other sizes: available -Weight: 8.7 kg

width: 920 mm depth: 420 mm height: 1950 mm weight: 70 Kg Practical tool cabinet with 4 shelves Color RAL 6035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus

turning diameter: 430 mm turning length: 1500 mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 420/320/H225 mm -Weight: 41 kg

BAR LATHE MIYANO BNJ 42S :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iT - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 42mm Number of main spindle revolutions: 5000 - Number of tool holders: 2 - Number of first turret tool positions: 8 - Number of first turret motorized units: 8 First Turret X-Axis Travel: 142mm First Turret Z-Axis Travel: 250mm Number of second turret tool slots: 3 Number of fixed tool positions for the second turret: 3 Sub-spindle: yes Sub-spindle speed: 5000 Power against spindle: 5.5Kw Bar clearance: 42mm Z stroke counter spindle : 250mm Bar feeder model and brand: LNS Hydrobar Mini Sprint Chip conveyor: belt conveyor Number of live tool holders supplied: 2 :::D DIMENSIONS AND WEIGHT::: Length: 2700mm Width: 1450mm Height: 1720mm Weight: 4600Kg

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM