135,357 used machines on RESALE, but how to find them? Machine Search
Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, ...
Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!
Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...
Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Reference number: S 92 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.
Slide valve, 4WEH32Q63/6EG24N9EK4/B10MH, R901402242, Rexroth, used Please note: This is an original Rexroth product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used The part was bought from a spare parts warehouse of a certified company and is in very good condition. The valve was removed from a Bühler die-casting machine and consists of: - Slide valve, 4WEH32Q63/6EG24N9EK4/B10MH, R901402242, Rexroth, max. 280 bar, used - Directional spool valve, 4WE6J62/EG24N9K4/B10MH, R901402267, Rexroth, max. 350 bar, used - Approx. 40 kg Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refun ...
Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer
groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...
Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format
Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format
Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...
Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg
used
RECON Part number: 524 070 11 01 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 820x410x810 mm Weight: 64 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 100 x 50 mm Version: Head traverse 1,450 mm clear width load per pair of trusses 1,800 kg, with the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting
Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...
The scope of delivery includes: 01x Workbench,used System substructure dimensions: approx. 1,340 x 700 mm Height of top edge worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm consisting of EACH: 02 x Workbench stand, used Manufacturer: Dexion Type: P 90 Material colour: sendz. galvanized Profile dimensions: 100 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 900 mm high 700 mm deep 04 x Workbench trusses, used Shelving system: Dexion Type Speedlock P90 Material colour: sendz. galvanized Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,140 mm 08 x Dexion safety pin, used Type: Speedlock P90 Material colour: sendz. galvanized Ø Head: 13.58 mm Ø pin: 5.92 mm Weight / piece: 0,018 kg Particleboard, second choice, used Thickness: 38 mm Di ...
used
Recon Part Number: 1217 4852 (6.441.0.730.012.6) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
sheet thickness: 1.25 mm steel Roller center distance: 63 mm
used
RECON Part Number: 1216 8348 6.420.0.940.006.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
For sale is a commercial kitchen with 4 pieces of Schneider cooking kettles in V2A double-walled heated with (24KW) with a 400 liters (together 1600 liters!) and an extraction system. as well as various accessories. such as e.g. Sandwich glass board etc. New price was just under 100,000€. It has been proven that the facility was used very little. Plant immediately available from site (lead time approx. 2 weeks for dismantling and delivery) For sale is a commercial kitchen with four double-walled, 24kW Schneider stainless steel cooking kettles, each with a 400-liter capacity (1600 liters total!), and an extraction system. Also included are various accessories such as a sandwich glass worktop, etc. The original price was nearly €100,000. The system has demonstrably seen very little use. The system is available immediately from the site (lead time approx. 2 weeks for dismantling and ...
Recon Part Number: 1217 2085 6.440.0.731.009.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
RECON Part number: 524 011 26 01 #524100554 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Submersible pump, TH45/470+001, Brinkmann Pumps, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - has some storage marks due to the long storage period, - The condition of the pump looks as if it has not been used, or only used briefly, or it has been completely overhauled by Brinkmann. Technical data: - 30L/min, 142m, - 240/400V 2.6KW, - Immersion depth 470mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 85x24x18cm, ca30kg, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods ca ...
Recon Part Number: 1215 2686 Dextrorotatory Seawater Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
We offer Doka Eurex 30-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 400, used - 59,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
Centrifugal pump with magnetic coupling.
We offer Doka Eurex 20-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 20 top 400, used - 49,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.
Used- Alfa Laval BRPX-417-SFV-31CGL-50 Desludger Disc Centrifuge. 316 Stainless steel (product contact areas), maximum bowl speed 4180 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, sludge cyclone, belt drive configuration, drive motor
Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V
Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.
Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box
maximum number of results exceeded
please refine your search
