station used for sale

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use

Power supply: 230V 50Hz (1-phase) very good condition - nearly new; ready for operation

Stationaere welding smoke extraction with 1500m3/h suction suction systems and added cyclon dust separator Aspirator: Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Series 2355 Type SP-15 1500m3/h 2050 mm/WG 380 Volt 34 Ampere 18.5KW Filter Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Type SF-1500-G Filter Strainer system can be used immediately. Special price

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

Length: 1800mm Lifting height: 500mm Width: 1500mm Height: 2500 mm Number: 4 pieces; very good

LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation

CB-Behrens CB-25-II/1650-L Hours of operation:-Behrens 41190 hour laser ca 25000 hours Year of construction: 1995 Documentation: All available Software: IBH-CNC Last revision: mid 2016 laser Wegmann Basel Triagon 2Kw 2014/5 the glass tubes have been renewed Y-spindle was renewed. Only 17 are well usable from the revolver places the others should be also usable after a review.

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

FENSTER-UNIVERSAL-DREH-KIPPTISCH RUCHSER-Universal for wing and frame motions. Rotary tipping table with pneumatic tilting device, work platform with 4 loading holes. Height 900 mm-1050 mm adjustable. Lifting device 400 mm 6 storage boxes Fahing facility Used machine without warranty or warranty. Loveling from the Hamburg location unloaded.

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

We offer two Deutz/MWM type for purchase: TBG 604 CV16. The CHPs ran flawlessly until they were decommissioned. Scope of delivery: engine, generator, control cabinet, gas section, exhaust heat exchanger, silencer and documents.

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 50 litre funnels. Filling head height infinitely adjustable. Dosing quantities and filling speed infinitely adjustable, control line for external pulse generators. Pneumatic drive, external compressed air supply 6 bar required. Dimensions B/T/H 130/70/190 cm. Workshop-tested, ready to use. Further on request.

Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for powdery, liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 12 l funnel with screw conveyor. Filling head height infinitely adjustable. Dosing quantities and filling speed can be infinitely variable. Pneumatic drive, external compressed air supply 6 bar and 400 V power connection required. Dimensions B/T/H 120/45/210 cm. Workshop-tested, ready to use. Further on request.

Water tanks, extinguishing water tanks and heating oil tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used diesel tank according to DIN 6616 in the size of 7,000 litres is offered. Volume: 7,000 Ltr. Material: steel tank tank, material S235JRG2 Tank according to DIN 6616 Tank shape: cylindrical, horizontal, in integrated shells, double-walled Diameter 1.60 m, L approx. 3.70 m Exits: Dom on the top Tank according to DIN 6616 for the above-ground storage of heating oil and diesel Tank is overhauled and will be fitted with new fittings. An electronic dispensing system can also be installed. Tank technology newly equipped with: lid, filling nozzle, ventilation nozzle, suction line, truck filling nozzle, limit sensor and leakage indicator Tank is in top condition and is immediately available. Delivery time approx. 1  ...

to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim

for Euro pallets 12 pcs task - removal roller conveyors 60mm rollers, 250cm length, 95cm width with 80mm brake rollers Of which 5 pcs with task guided tours on the side (yellow) 7 pcs with end plates as collection points 6 pcs taxiways á 250cm 95cm width 36h lower in slope heights 20st. Bracing under the reeds Palette with transition roller pieces and div fasteners Further pictures of the conveyor technology are welcome on request!

description: Second hand crate-turning-stations for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 21 diverse used crate-turning-stations. When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our ...

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

complete 230kW

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

We offer a Liebherr G944 for sale.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Rademaker Bestreungslinie Stainless steel cladding Stainless steel band analog control can be controlled together or individually 269 operating hours Dimensions individually: 1st table: 92x110x120cm W/D/H 2nd table: 92x107x110cm W/D/H

description: Various second hand pallet-turning-stations Krones/KHS/ Schäfer for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 24 used pallet-turning-stations (predominantly Krones,KHS, and Schäfer, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger  ...

CHP MAN E2866DE Year of construction 1988 Gas engine 106KW with Piller Generator 120KW Electrical power in used condition for sale. Without guarantee or warranty to traders. Not tested.

Height approx. 2.4m 2.15x2.15

1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!

We offer three Jenbacher J 616 GS E 02 for sale. Specifications: Engine: Jenbacher Type: J 616 GS E02 Power: 2495 KW Year of construction: 2007 Generator: AVK Type: DIG 140 k/ 4W Power: 3013 KVA Voltage: 10 KV Frequency: 50 Hz Year of construction: 2007 Scope of delivery: complete system, except transformer and table cooler

Mobile plasticizer for pressing processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulic PN: 150 bar Pn: 16.5 kW P Heating:8 kW 400 V Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

MAN 3262 E302 275-550 kw electric power, 50 Hz plug and play units IN/Outdoor Container . All info in request PM Thanks previously advance

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Available in stock 2 x NEVER USED Capstone Control Stations. Most commonly used for Microturbines C30 Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Dump stations with NEW rollers for tape width 1200 mm NEW rolls with dimensions: 465 mm L x 89 mm ∅ Price €56 per piece 250 In stock

Dump stations with rollers (type Heavy Duty) for tape width 800 mm Rolls with dimensions: 275 mm x 430 mm x 275 mm Ø 150 mm Price €45 per piece 200 units In stock

Dump stations with rollers for tape width 800 mm Rolls with dimensions: 240 mm x 390 mm x 240 mm ∅ 133 mm Price €38 per piece 290 units In stock

Dump stations with rollers for tape width 1000 mm Rolls with dimensions: 220 mm x 650 mm x 220 mm ∅ 89 mm Price €30 per piece 560 units In stock

Dump stations with rollers for tape width 1000 mm Rolls with dimensions: 380 mm x 133 mm Price €36 per piece 500 units In stock

Schatz Advanced screwdriving system Schatz screwdriving system Length: 5450 mm Height: 3000 mm Roll-off block Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist 1 x Treasure 907500 System without Advantech TPC-1260 TE Touch Panel PC Item location: 42859 Remscheid Disassembly and transport by the buyer. The disassembly, loading, as well as transport can alternatively be offered by us. Find more screwdriving systems in other sizes - new and used -

Muller Martini Presto 8 stations + put cover The machine is like new and has had little work Trilateral put cover and 8 overlapping stations plus omega heads

MWM Motor Generator used on base frame MN : 61612001501 E 60 in 2020 incl. new camshafts

weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,500 x 1,250 mm