station used for sale

Multi-Station Distributor, Collective Terminal Plate PARKER Series MSP MSP4D23BA910 Connection size: A + B: G 3/8 , P + T: G 1/2 Operating pressure: max. 350 bar 8x stud bolt M5 x 120 mm, with screw 4x stud bolt M5 x 80 mm, with screw 4x stud bolt M5 x 70 mm, with screw spare part for machining center HECKERT CWK400 D ! used ! Dimensions ( without connectors ): 220 x 70 x 70 mm Dimensions ( complete ): 265 x 90 x 200 mm

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm Air diaphragm pump ALMATEC AC-E 10 operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Chemical dosing station PAGUS plastic cabinet 710 x 800 x 1690 mm 2 air-operated diaphragm pump and various valves and sensors cabinet almost metal-free ! Dimensions: 750 x 950 x 2100 mm

Mounting station with roller block MKF R 3026 Payload: 2000 kg Roller blocks only screwed on, Sockets and pneumatic connection not checked Dimensions: 1760 x 600 x 1000 mm

90 ° corner station with motor speed control rotating plate diameter 250mm clockwise without foot More then 300 machines new and second hand on our seema .de

90 ° corner station with motor with speed control and rotating plate diameter 250mm without foot - counter clockwise More then 300 machines new and second hand on our seema .de

Double station, fuel oil pump, 2x screw pump KRAL type: DS1 750.11X flow rate: 13.7 l/min delivery pressure: 4 bar speed: 2900 rpm viscosity: 6 mm²/s engine: AEG Type AM 71 NX2 0,55 kW 2760 rpm 218 - 242 / 380 - 420 V 3AC 50 Hz IP55 60 Hz - operation is possible ! used, tested ! Dimensions ( without connecting pipes ): 390 x 360 x 430 mm

Ref. -No.: 10198 Manufacturer: N/A Storage location: Halberstadt Further information: autom. welding station with positioner

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camer ...

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Soldering station, soldering iron, chip solder, soldering system -Temperature adjustable: 100-375 ° -Dimensions: 200/105 / H90 mm -Weight: 2.7 kg

Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current bra number only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for th ...

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Hydroelectric power station - Power 790 kW composed of: 1 Turbine Pelton / Effective gradient 223m / Water volume 400 l/s / 1 piece generator 1 shut-off device 1 hydraulic power unit 1 piece transformer

Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass.

3-axis welding station including 6-axis robotic arm complete with extraction hood and torch cleaning fume purification

TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500150 Min Tooling Area : 350250 Max Forming Area ( ROLL ) : 720500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.

Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Compressed air screwdriving station 4 PCS available Price per piece VAT not deductible Please inquire with location and postcode.

Modular cell culture station in hypoxia Biospherix X2-072514-1-00 1. Isolated workstation for cell culture work under controlled conditions. 2. Multiple incubation chambers, with independent O2/CO2/RH programming. Various sizes and configurations. 3. The incubation sub-chambers have doors that open into a large glove handling area with an aseptic and temperature, O2 and CO2 controlled environment. 4. O2 control from 0.1% to 99.9% is possible in each incubator. 5. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. 6. Heated interior atmosphere and work surface. 7. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. 8. Control of the O2 level also in the SAS or input/output exchange airlock for ...

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

TF Winding Technology Rewinding Station TFU 1202 The rewinder can be programmed via a hand-held terminal and offers a fully automatic winding process. It can be rewound from left to right or right to left, with or without a loop. The torque is also adjustable. The device is fully functional and has hardly been used. Feel free to contact us if you have any further questions.

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

CNC gluing station, manufacturer: MAW / NOTTMEYER, year of manufacture: 1999, serial no.: 80560002, multi-spindle drilling unit, 11 drilling spindles, pitch approx. 32 mm, pneum. Clamping table, gluing unit, glue pump WIWA, controlled stop system, panel transport system, PLC control with operator panel, Fabr. Siemens, type Simatic OP 27, infeed belt conveyor belt, aluminium transition bridge, (hammer bid is conditional, sum of bids 334-350 or collective bid of item 333 will be compared after the auction ends)

Labelling station More then 300 machines new and second hand on our seema .de

Elpress hygiene station with sole cleaner, hand disinfection unit and inlet control, number: 83202050, year of construction: 20.11.13, 400 V, 50 Hz, 16 A, 1 kW, weight: 225 kg, length brush: (2x) 930 mm, total dimensions: 1600 mm x 900 mm x 1200 mm.

Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg

Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg

Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg

Width 66 cm Year of construction 2008 Pocket Folder 2nd station: 4 folded pockets 66 cm downstream knife shaft Delivery date: immediately Price on request. We deliver and install worldwide!

Seeding Station Lippelt Moli 580 Working width: 580 mm One-sided seed application 1x seeding container with brush 1x seeding container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seeds to the dough pieces Wire belts, removable Movable underframe for seed collection container Control with start/stop button, 2x potentiometer for belt speed and the seeding rate and emergency stop button

propulsion: SEW motors description: We are offering a complete empty pallet checking station incl. a GOOD pallet magazina and a BAD pallet magazine, incl. chain- and roller conveyors as well as incl. a protecting fence The placement can be adapted individually. Pallet inspector, pallet inspection machine. We do also have more conveyors on stock which we could offer you. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or  ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 25,000 liters double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic pumpgun new . Container dimensions Length 8,390 mm Diameter 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank system. We are happy to offer yo ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 80 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 80 (new) . Flow rate approx. 70 LTR/min . Hose length 4mtr can be extended. Automatic Zapfpisole is new . Container dimensions Length 3,710 mm Diameter 1,600 mm Weight approx. 1,450 kg Of course, you can also use your tank system. We are happy to offe ...

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

Heating method: steam or electric CIP is controlled by processor SIEMENS- S7

Stationary air compressor Lutos Oil-free air blower Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Gas filling device / scale with rolling landing Manufacturer: Ninnelt International GmbH Type: CTE 110 In good condition!

Gas filling facility with weighing technology / scale manufacturer: Ninnelt International GmbH Type: What 110 p In good condition!