station used for sale

Bluhm Weber Legi-Air 4050S Labeling Machine 4.14.1 Basic structure The system is designed as a closed aluminium profile frame and has a very compact design. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The facility includes four workplace stops. Operation is via a touch screen. The control panel is mounted on the right side of the frame. In the station, a labeling system from Bluhm Weber is used, here the documentation of the company Bluhm applies accordingly. 4.14.2 Functional sequence - The retracting workpiece carriers with IO modules are stopped, excavated (positioned) and contacted in the substations 10.1 or 10.2. In these two stations erf - In substation 10.3, the IO modules are automatically labelled. The generation of the labels and their content ...

- flat pile feeder - 1st station with 4 buckles - 2nd station with 4 buckles - Gate fold - Mobile cross fold station - stream delivery

Modular labelling machine krones 16 heads - year 2003 Year: 2003 Counterclockwise direction Speed: 15.000 bph Electronic cam with 16 plates 1 modular adhesive station to apply one label 1 modular glue station to apply back label Suitable for 3° modular station (glu or adhesive) Electric adjustment height Plc and inverters tpo regulate machine Turnable panel with touch screen Block entry system Safety protections

FETTE TABLET PRESS, MODEL P3100 Year of construction: 1992 55 station rotary double sided tablet press. Designed for high volume production of a wide range of tablets with an output of up to 594,000 tablets per hour. Machine size: 1650mm x 1600mm x 2900mm height (with vacuum units fitted, or 2000mm high without them) Approx. weight: 3,750kg Key information: - Punch/Die type EU-BB - Maximum fill depth: 18mm - Upper punch entry: 2mm – 6mm - Maximum tablet diameter: 13mm - Maximum tablet thickness: 8.5mm - Initial compression force: 20kN (2 ton) - Maximum compact force: 100 kN (10 ton) - Die plate speed: 15-90 rpm - Fitted with 20kN (2 ton) pre-compression station - Upper punch body lubrication and keyed upper punch bores - Variable frequency drive - Two Stainless Steel PIAB vacuum conveyors mounted on the top of the machine for delivering bulk product - Emer ...

Laminator - paper over board Make Tùnkers Model S-1100 Year ///// Workingwidth 1100 mm As standard laminator Automatic feeder - register - full surface gluing - manual feeder into automatic lamination station - pressing belt - delivery on table As spot label gluer Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt - pressing belt - delivery on table Both options ? Okay ! Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt OR manual feeder into automatic lamination station - pressing belt - delivery on table Delivery delivery on a table Condition example machine sold throughly refurbished by us almost consessionless - this machine is eventually obtainable from the USA - all new pneumatic - all new shafts for the pressing station - all bearings replaced - all new belts - all ...

4-component dosing station with automatic material supply - Motan Year of construction: The station includes: - 4 screw feeders volumetrically with automatic suction conveyors - Station with filter and vacuum pump Touch screen control panel Power supply possible in two ways (to choose from): 1. Supply of a pump with control of the brand Motan. Pump capacity 0.9 kW - sufficient for two material loaders 2. Supply from a vacuum pump. Pump power 4kW - sufficient for 4 loaders. In this case, the device should be integrated into the pump. Price: On request

Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP  ...

Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...

1-Clamp Automated Perfect Binder, Format: Sheet Size: Max. 320x320mm, Min. 148x105, Format: Cover Size: Max. 660x320mm, Min. 230x135mm, Book Thickness: 1 to 50mm, Cover Weight Range: 80-300 g/m², Cover Pile Height: Max. 70mm, Max. Production Speed: 500 Cycles/Hour (About 300-400 Books/Hour), Color Touchscreen Control Display Panel, 200 Memories For Repeat Orders Saveable Jobs, Double And Miss Detection, 1 Carriage Clamp Automatically Adjusted To The Input Book Thickness, Automatic Book Thickness Caliper, Milling And Roughening Station, Adjustable Milling Depth From 0mm To 3mm, Glue Tank With Dual Application Rollers And Side Gluing Roller (Adjustable Amount Of Glue And Glue Lenght Through The Color Touchscreen, Spine Gluing, Side Gluing, Nipping Station, Suction Drum Cover Feeder, 4x Cover Scoring/Creasing, PUR Gluing System SM Klebetechnik, Type: AN 533604, AGE: 2009, Serial No. 090838 ...

Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Muller Martini 3641, Transfer Element To Binder Muller Martini 3643. Perfect Binder: Muller Martini 3016-18 (1998) M-Mo. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmers: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 cycles/hour, Format: min. 100x140mm, Max. 420x305mm, Book thickness: min. 3mm, Max. 60mm, Cover width (open): min. 203mm, max. 642mm.

Size max: 738 x 1100 mm Size min: 210 x 297 mm Longest fold: 560 mm Shortest fold: 35 mm (58 mm at pocket 1) Paper thickness: 40 - 250 g/m2 Staplehight: Palet feeder: 1200 mm - PFU-74F pallet feeder - Touchscreen Monitor - Automatic setting - 1. Station 6 folding pockets 2. Station 1 knife plus folding pocket left 3. Station 1 knife - Downstream slitter shafts in the first and second folding unit - electron. Ultrasonic-double sheet control - Creasing and perforating device - PSX-56 High-Perfomance Package Delivery

Description Gravimetric dispenser Power supply voltage: 230 V Total installed power: 220 W Mixer motor power: 0.18 Kw Number of hoppers installed: 4 Discharge type: Damper (station 1, 2, 3) / Screw (station 4) Auger station motor power: 15 W Production: 80 Kg/h Hopper capacity: 4 x 18 L Mixing chamber capacity: 7 L

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Size: 570 x 330 x 60 mm, speed: 1.600 c/h, 8 clamps, hotmelt spine gluing unit, hotmelt side gluing unit, milling and roughening station, cover station, pressing station, delivery

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Width 82 cm Year of construction: 2005 Round stack feeder RFH-82 1st station: 6 folded pockets 82 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 2nd station: 4 folded pockets 66 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 3rd station: 2 fold pockets 56 cm automatic folding pocket adjustment automatic folding roller adjustment downstream knife shaft Standing sheet delivery SBP 66 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

We can offer you all spare parts for the following machine: SADDLE STITCHER STAHL-ST100 // Age: 1995 Spare parts: 1) Double feeder ST-100 Station I 2) Double feeder ST-100 Station II 3) Double feeder ST-100 Station III 4) Stitching unit with 2 normal Hohner stitching heads and 4 ring eyelets stitching heads 5) Trimmer 6) Sheet metal & cladding 7) Compressors + motors

Knapp roller conveyor accumulation roller conveyor 1530-510-450 RA1955 Brand: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm length: 1530 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: belt, not included Stowage spaces without drive: 2 Frame height: 90 mm Conveyor speed: motor station dependent, please contact us for details Scope of delivery: without supports, without side guide, without drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one side and on both sides Motor station Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Roll division in mm: 90 Driven: ...

Knapp roller conveyor accumulation roller conveyor 1620-710-650 RA1953 Brand: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm length: 1620 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: belt, not included Stowage spaces without drive: 3 Frame height: 90 mm Conveyor speed: motor station dependent, please contact us for details Scope of delivery: without supports, without side guide, without drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one side and on both sides Motor station Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Nominal / outside width in mm: 710 nominal voltage: 24V Roll division in mm: 90 Roll width in mm: 650 Driven: ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

NILPETER FA4 – 430mm / 8-color FLEXO  Age: 2012  Max web width 420mm  Max print width 410mm  8x UV Flexo station  Unwinder  Rewinder  1x Rotary Die Cutting Section  1x Rotary Hot-Stamping Section  1x Cold Foil Station  1x Corona  1x turn bar  1x lamination station  Tool list

• Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425 • Drive 380V/50Hz

• Designed for sealing cans with a round plastic film punched from the roll • With double punching station and double sealing station • Running direction from left to right • Station adjustment in running direction of the cans • Prepared to accept a conveyor belt (not included in the scope of delivery) to accommodate cans/bottles in transport buckets provided (not included in the scope of delivery) • Rationator transport buckets, type RATILIGHT Puck 1 for object sizes 50-1000 ml were used (see pdf). • Output max. 50-60 objects/min • Max. Object height 400 mm • Punching with punching knives • Existing die-cutting and sealing formats for film diam. 83.1 mm • Foil grid rewinding • PLC Siemens S7-300, Siemens Touch monitor • Drive 400V/50Hz

turning diameter: 36 mm turning length: 100 mm control: Traub TX 8i turning speeds: 6300 U/min c-axis: 0,001 turret (x-stations): 12 angetrieben turning speeds: 6000 U/min x-axis: 370 mm z-axis: 250 mm y-axis: +/- 20 mm gripping station: 36 mm turning speeds: 6300 U/min c-axis: 0,001 0 collet unit: 2x Hainbuch HSP/GSP SK 6970 ZW/G load magazine: FMB turbo 5-42 chip conveyor: ja / yes kW total power requirement: 33 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 1,22 x 1,7 + FMB m parts conveyor: ja / yes front attachment: 5(7) rear station: 5 (4 angetrieben) CNC automatic lathe Traub TNK 36, year 2005, with bar feeder FMB turbo 5-42 This turning-milling centre is in a very good condition and equipped with 2x Y- axes and driven tools on 3 tool carriers. Tool carrier 1 = turret 12-fold driven, Y-axis +/-20mm Tool carrier 2 = front attachment 5 stations (4 driven) Too ...

Built in 2007 Size max: 430 x 320 x 60 mm Size: 140 x 100 x 3 mm working hours: 17.900 h Speed:max 5.000 c/h Equipment: gathering machine: • 24 stations • 24 feeder 1571 controls: • ASIR automatic signature image reader • ASAC automatic self-adjusting calipers perfect binder: • 20 clamps • double kombined spine preparation station • hotmelt spine gluing unit • hotmelt side gluing unit • rotary coverfeeder • cover scoring • cover pressing station • 2nd cover pressing station • lay down device optional equipment --- not included ---: • PUR spine gluing unit Bl7yrcc8tb • PVA (cold glue) spine gluing unit • conveyor belts to trimmer • trimmer Müller Martini Merit

Packaging line V2000 for laminate Infeed with quality assurance control station and product collection Erecting Station Cardboard Backing Transport Adhesive application Station Overlap Labelling Inlet Shrink Tunnel Collection Packages Palletizing Strapping Spout More items new and used - you can find them in our shop! International shipping costs on request!

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Turning device, edge processing, turning station, turning table, turning station, turntable, transport system, roller conveyor -for edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: Narrow -Roll width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable baffle -Roller conveyor: wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Turning head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg

Illig RV 53 thermoforming machine Year: 1990 Model: RV 53 Molding area (VxH): 500 × 350 Molding depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max.): 1.40 mm Feed systems: roll fed Lower mobile table stacker Machine in production The stacker is incomplete, the top and bottom table components are missing. Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient. Capacity approx. 25 cycles per minute. Cutting station regeneration, pump regeneration, chain regeneration, The drive for transporting the film has been replaced with a servo motor with an inverter

Custom-designed spotting robot for transferring liquid solutions from 384-well plates to a µ-array plate that can accommodate up to 9216 spots about 300 µm in diameter. It consists of 2 modules A & B. - A: FIFO unit (fill in fill out) with a storage capacity of 40 µ-arrays under argon flow, manual or automatic in-out transport system - B: Spotting unit with 384 pin print head (X-Y axis system), washing station & vacuum drying station for the print head and storage station for 24 plates 384 wells; Camera system for positioning / indexing µ-arrays The transfer of the 384-well and µarray plates within the 2 modules and from one module to the other is done using several wrought transport segments

Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 9300 € : 192.51 € : 36 to : 170 mm : 3 : 27x10 mm : 15 mm : 24 1/min : 350x6 mm : 80x8 mm : 2,2 kW : 1100 mm : 800 mm : 1400 mm : 485 kg 3 working stations foot pedal hydraulically driven oil filled table at punching station with gauge user manual in GERMAN and ENGLISH FLAT STEEL SHEAR flat steel mm 200 x 13 with small deform. mm 350 x 6 blade lenght mm 356 round bars mm 30 square bars mm 25 working hight mm 980 &,nbs ANGLE IRON SHEAR L profiles 90° mm 80 x 80 x 8 L profiles 45° mm 50 x 50 x 6 round bars (optional) mm 35 square bars (optional) mm 30 &,nbs NOTCHING STATION (optional) sheet mm 8 L profiles mm 60 notching depths mm 53 PUNCHING STATION max. punching cap. to 36 max. sheet diam. mm 27 x 10 gap mm 170 stroke mm 28 working height mm 980 The data for this ad was created with ModulMWS - the software s ...

- Pallet feeder FP110 - MBO Navigator Control - 1. Station 4 buckles - 2. Station 960/6 buckles - 3. Station (Herzog Heymann) 52/4 buckles - Mobil Cross Fold Z2 - Mobile delivery S BAP 82 ME - Mobile delivery ASP 66-2ME

Used machine in excellent condition year 2002 Stainless steel monobloc composed of: • Deaeration station (vacuum in the bottle + Nitrogen or CO2) • Gravity filler with slight depression with 9 taps. • Vacuum capper for flat caps. Hourly production: 1500 bottles/hour Fits standard 0.75 l bottles FIMER is a company that has been producing bottling machinery for more than 50 years, with particular attention to fillers which are the only machines that come into contact with the product to be bottled. as regards the wine product, it is particularly important to minimize oxidative stress which, if not regulated, can negatively impact the product by reducing its useful life. This machine is therefore equipped with a deaeration station which, after creating a vacuum in the bottle, fills it with inert gas (choice of nitrogen or CO2). These gases, having a greater density than air,  ...

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm from a maintenance workshop New price ~ 13.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication Machine link: http://mhp.logotech.de/hpm/ ...

NEX QC - Energy Dispersive X-ray Fluorescence Spectrometer (EDXRF) Excitation • 50kV X-ray tube • Maximum power 4W • 6 filter positions with a shutter Detection system • High performance semiconductor detector • Thermo-electric cooling using the Peltier effect • Optimal balance between spectral resolution and the maximum number of pulses counted Sample chamber (possibilities) • Large internal dimension of the sample chamber: 190 x 165 x 60 mm • Single station for 32 mm diameter samples • Single station for 40 mm diameter samples • 6-position sample feeder with a diameter of 32 mm • 5-position sample feeder with a diameter of 40 mm • Single station for 32 mm diameter samples with sample rotation • Analysis in air or helium Environmental conditions • Temperature 10-35°C (50-95°F) • Relative humidity ≤ 85%, non-condensing • Vibratio ...

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

Buchstrasse-Hardcover - Casing In Line Kolbus BF 40T Year 1977 - Serial-No. 558 Format / Size min. 100x125mm - max. 270x365mm Buchblock Dicke / Book block thickness 6 - 70mm Leistung / Mechanical speed max. up to 40 Takte/min. Buchstrasse Ausstattung / Casing in Line consists of: Fliessdreischneider / Three knife Trimmer Wohlenberg Modell 44 Rundungsstation / Rounding Station Hinterklebestation fuer Gaze Kapitalbandstation / head-tailbanding and backlining station Deckenanleger / Case Bending Station Falzeinbrennstation / Pressing Unit Kolbus FE Pressing Stations with Heated Joint Forming Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feeder Baujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mm Aussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz fuer Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed station Ratiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rueckenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heissleim / Hotmelt side gluing unit Faelzelstation / Back Lining station Buchblock- und Ganzpresse FM 405 fuer fadengeheftete Bu ...

Width 82 cm Year of construction 2015 Circular Pile Feeder RFH-82 1st station: Knife wave station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra Grip Automatic folding pocket adjustment Automatic Folding Roller Adjustment Dual power device Standing arch delivery SBP 86 Completely overhauled and workshop tested Machine condition: cleaned Delivery date: immediately Price on request. We deliver and install worldwide!

punching pressure: 80.0 t punch diameter: 28 x 20.0 mm punch diameter: 57 in 9.0 mm throat: 320 mm round bar steel: 45.0 mm square edge steel: 45.0 L-beam: 150 x 13.0 mm shear: flat material: 300 x 20.0 mm adjustment of stroke: 0 - 55 mm work height max.: 1130 / 890 mm strokes per minute: 34.0 punch diameter: max. 160 mm voltage: 400 V total power requirement: 7.5 kW weight: 2095 kg dimensions: 1760 x 710 x 1830 mm New price ~ 24.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shears with a large radius - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - KINGSLAND electrical contact length stop - Protective devices at workstations - 2x freely movable foot switches - User manual (PDF) Machine link: http:/ ...

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40-50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, piping ...

Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for  ...

The 2017 Mikformen TM800/3 is a versatile plastic thermoforming machine designed for sale. With a weight of 13,000 kg, this robust and precise machine offers a compact design, measuring 11.50 meters in length, 2.75 meters in width (including the electrical cabinet), and 2.85 meters in height. It is specifically designed for plastic thermoforming processes, with a maximum sheet width of 840 mm (with a 60 mm stretch) and the ability to handle sheet thicknesses ranging from 0.2 mm to 3.0 mm. The TM800/3 features a maximum product height of 130 mm in both positive and negative directions, and it achieves a cycle speed of 75 cycles per minute during dry-run operations. Equipped with powerful pressure forces of 60,000 daN for the forming station, 75,000 daN for the punching station, and 80,000 daN for the cutting station, this machine delivers precise and efficient results in plastic thermofor ...

OMAS model ML16 Monobloc fully automatic machine, constructed in 316L grade stainless steel, Four head inline diving head liquid filling station, positive shut off tips can be used if required. Variable speed 100mm wide slat -band conveyor and infeed/out-feed gating control. Star-wheel transfer of filled bottles to the plugging/ insert and cap placement station supplied from two stainless OZAF vibratory feeders located at the rear of the machine. Bottles then progress to the pre-set torque capping station and then back onto the line conveyor. Separate control panel for all machine functions. It is fully guarded with electrical safety interlock devices on all opening panels. Fill range 50 to 500ml: max bottle dia 65mm: max speed 50 bpm: Installed power 4kw: Approx overall dimensions 2.7 x 1.7 x 2.1m high: weight 1,300kg. Standard nozzles to be supplied to suit clients bottles.

Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...