stand diesel used for sale

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model code: Valves 4070... see photos -Dimensions: 340/300/H400 mm -Weight: 40 kg

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Valve block, control block, hydraulic control block, control unit, control valve -Manufacturer: GSL (German Standard Lift), control block for the drive of work platforms -Model Code: Valves 4070... see photos -Dimensions: 340/300/H160 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg

Technical data and features: -Made in Germany -Type Standard Shepherd Series 14/6-2 -Made of high-quality stainless steel sheet -Dimensions length 425 x width 275 mm -Material thickness: 1.5mm -Weight: approx. 1.5 kg -315 shape punches for bayonet closure with the plastic clips -The currently available used workpiece carriers are partly electropolished and partly marked. We offer used and new workpiece carrier systems with different plastic clips, also as custom-made products and in different sizes. In addition, the appropriate basket systems and automation technology are also available if required.

Bagging machine for valves and open bags, Fabr. Wagner Oberursel, Type:WAMA SP-Standart Plus. Weighing range 5-30 kg, Product contact in stainless steel, Many accessories available

Potentiometer, dual potentiometer, regulator, controller, level regulator, control Manufacturer: Elvo, Regulator Controller -Type: COF2AC -Voltage: 115-230 V 50-60 Hz -Number: 2x controllers available Price: per piece -Dimensions: 265/160/H90 mm -Weight: 1 kg/pc.

The scope of delivery includes: 01x Depth web, used Material colour: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm f. Stand depth: approx. 1,100 mm Clear span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Truss support: approx. 53 mm Unit weight: approx. 2.52 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Cutting length: 5.300 mm Cutting height: 2.200 mm Dimensions (L/W/H): 6.470 x 1.281 x 2.885 mm output: 4 kw turning speeds: 4.750 U/min saw-blade dia.: 300 mm Cutting depth: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter: 350 mm turning dia. in gap: 450 mm spindle bore: 40,0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: 55029 D 1-4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 529 kg. range L-W-H: 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest - passage diameter max. 60 mm - Follow-on steady rest - passage diameter max. 60 mm - Clamping plate 250 mm - Quadruple tool holder - Shaft fixing device - Protection device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant device - Extendable chip tray - Frequency converter - Foot pedal with brake function according to CE - Splash guard - Thread gauge - LED machine light - Digital speed dis ...

For sale is a Perfactory 4 LED Standard XL SET A precise and reliable 3D printer for industrial applications. The machine is particularly suitable for use in jewelry, dental, and prototype production, where high levels of detail and surface quality are crucial., Technical highlights:, - Model: Perfactory 4 LED Standard XL, - Technology: DLP (Digital Light Processing), - Light source: High-performance LED for long life and stable exposure, - Construction volume: Large print volume for versatile applications (XL version), - Resolution: Finest details down to the micrometer range, - Operation: User-friendly interface, quick material changes, Advantages:, - Low operating costs thanks to long-lasting LED technology, -, - Robust and reliable for daily use, - Ideal for series production of small components and prototypes, Condition:, - Used, good condition, - Fully functional and ready to use,  ...

One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible.

JRIMAC Slitting Saw STANDARD -NEW- - Cutting length: up to 6,200mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong slat protection, and extraction connection - PLC machine control - Stepless, frequency-controlled, power-stable feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - Saw blade quick clamping system "JRIMAC" - Front table support made of plastic or solid wood - Force-guided splitting wedge - Lower standard extraction duct installed ready for connection - CE compliant, dust tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

General SKU259P364 LocationBarneveld MakeITT standard plateflow (usa) TypePF 35 No.A50535-01 Year of construction1995 Pressure Working pressure10.3 Bar Main Features MaterialStainless steel Surface13 m2 Size length380 mm Sizes width350 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface+/- 13m2 Number of platens41 Plate sizes380x850 mm Connections(4x) 110 mm Max. temperature110 degr.C Information Mounted on framecheck Floorspace0,9X05 M Total height1,0 M Weight500 KG Technical specs Extra informationindicated size is platen sizePlate heat exchangersITT Standard BuffaloHeat exchangers > Plate heat exchangersBrand > ITT Standard Buffalo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Dimensions (L/W/H): 960x900x1460 mm Weight: 200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Side Tables, Air Table, Programmable, Standard Accessories

Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees ., Capacity: 2000 kg/hr, Conditions of sale: As is” or Refurbished , Hopper: Twin Screw , Drive: Self driven by motor and belt with reducer , Outlet: Double jacket outlet for temperature Control , Location: In stock

This 4-axis TAJMAC-ZPS H63 Standard was manufactured in 2005. It features a robust Siemens control system, X-axis travel of 1010 mm, Y-axis of 800 mm, and Z-axis of 1010 mm. The work table measures 800 mm in length and 630 mm in width. Ideal for precision machining, buy this TAJMAC-ZPS H63 Standard horizontal machining centre. Reach out for more information.

This Bystronic ByTrans 3015 Standard was manufactured in 2014. Ideal for automation systems, it offers reliable performance for handling tasks. Consider the opportunity to buy this Bystronic ByTrans 3015 Standard automation system. Contact us for more information.

General SKU389X985 LocationBarneveld CEcheck MakeDickow Pumpen Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump MaterialSilicon steel 1.5023 Centrifugal Pumps Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Information TypeNCL s 200/400 Mach.No.24221006 Year of construction2024 Mounted on framecheck Floorspace0,85 x 2,2 m Total height1,05 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Cutting length: 5300 mm Cutting height: 2200 mm output: 4,4 kw turning speeds: 4.750 U/min Cutting depth: 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 2005. This STRIEBIG Standart II TKR 6220A features a robust, torsion-resistant construction and a powerful 5.5 kW motor for efficient cutting. It offers a cutting area of 5300 x 2200 x 80 mm and includes up to 17 ball-bearing mounted support rollers for stability. If you are looking to get high-quality cutting capabilities, consider the STRIEBIG Standart II TKR 6220A machine we have for sale. Contact us for further details.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5200 mm, 2200 mm

STRIEBIG Panel Saw Used machine Wall installation Motor 380 V (50 Hz) 4.4 kW Cutting length 5,200 mm Cutting height 2,200 mm Cutting depth 80 mm Saw blade Ø = 300 mm Revolution: 2,880 rpm. Slatted frame made of wooden strips Suction hose Fold-out center support good condition

1502.930 B Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1502.930 B Details see picture PLUSPOINTS Heating of the figure roller, do not sprinkle flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Leftover bread chopper Hommel Rotormat 1000 StandardUniversal - Chopper, for grinding fresh or dry leftover bread, breadcrumbs, fruits, nuts, cheese rows.The chopper is with 3 kW motor.380 volt / 50 Hz motor 3 kW stainless steel cladding dimensions (H x W x D) 146 / 65 / 90 cm (H/W/D)The picture may differ from the delivered product, as we always get something new. The Hommel Rotormat 1000 is a shredder manufactured by the Hommel company. This machine is often used in bakeries and larger food companies to shred leftover bread.

Kalmeijer 1613.900 B KGM Pastry Forming Roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1613.900 B Details see picture ADVANTAGES Heating of the figure roller, no flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller 1263.900 B NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1263.900 B Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1501.920 B Pastry forming roller Standard rollers NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1501.920 B Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer Pastry Forming Roller KGM  1380.910 Bra Maker : KalmeijerType : KGM 250NEWDedetails see picturePLUSPOINTSThe heating of the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space.  Kalmeijer KGM pastry forming roller Standard rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)Automatic “stop and start“ (machine comes to a stop when there are no more dough sheets or baking trays

Kalmeijer 1383.901 B KGM Pastry Forming Roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1383.901 B Details see picture PLUS POINTS Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space.  Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1612.910 B Pastry forming roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1612.910 B Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller 1612.900 B Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1612.900 B Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

1100.910 B Kalmeijer KGM Â Pastry forming roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.910 B Details see picture ADVANTAGES Heating of the figure roller, no sprinkling flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1291.910 B Pastry forming roller Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1291.910 B Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller 1263.930 B Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1263.930 B Details see picture ADVANTAGES Heating of the figure roller, no sprinkling flour and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer 1383.910 B KGM Â Pastry forming rollerManufacturer : KalmeijerType : KGM 250NEWBordering number : 1383.910 BDetailment number : 1383.910 BDetailment of the figure roller, do not sprinkle flour and thus better baking styleChange of the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer Pastry Forming Roller KGM Â 1380.912 B Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1380.912 B Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within a minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1380.910 B Order Number : 1380.912 B Order Number : 1383.901 B Order Number : 1383.910 B Order Number : 1263.930 B Order Number : 1291.910 B Order Number : 1100.910 B Order Number : 1612.900 B Order Number : 1612.910 B Order Number : 1613.900 B Order Number : 1263.900 B Order Number : 1501.920 B Order Number : 1502.930 B Details see picture

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 45 mm -Stroke: 170 mm -Total length: retracted 580 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 2 pieces -Price: per piece -Dimension: 580/95/H125 mm -Weight: 16.9 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Stroke: 385 mm -Total length: retracted 675 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 16 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder single-acting stroke 20 mm -Type:E0400180H30020 T17 / E0400180H 30020 T19 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 220 mm -Hole: 1x Ø14 mm / 5x Ø15 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 50 x 220 mm -Weight: 2.8 kg/piece