stand by used for sale

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

faceplate diameter: 5000 mm swing diameter: 6300 mm turning height: 4030 mm Control: Siemnens type: 840 D power line Shop Turn live tooling: turning speeds: 25-630 U/min Tool changer: 8 Pos. Max ram stroke: 2000 mm ram head dimension: 300x300 mm cross rail - adjustment: 3200 mm turning speeds: 0,4-50 U/min transmission ratio: 2 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 129 t dimensions of the machine ca.: 14,5x13 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Biscuit Moulding Roller Kalmeijer KGM NEW 1123.900 AHmaker : KalmeijerType : KGM 250NEWPorder number : 1123.900 ADedetails see picturePLUS POINTSThe figure roller heats up, no flour is sprinkled and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Moulding Roller Kalmeijer KGM NEW 1120.930 AHmaker : KalmeijerType : KGM 250NEWProduction number : 1120.930 ADedetails see picturePLUS pointsHeating of the figure roller, no flour sprinkling and thus better baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller 1291.900 A Kalmeijer KGM NEUHeducator : KalmeijerType : KGM 250NEWPor number : 1291.900 A For details see picturePLUS POINTSheating of the figure roller, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller 1120.923 A Kalmeijer KGM NEUHeducator : KalmeijerType : KGM 250NEWProduction number : 1120.923 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller 1100.931 A Kalmeijer KGM NEUHeducator : KalmeijerType : KGM 250NEWPor number : 1100.931 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus better baking styleChanging the figure roller without tools within a minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

1100.932 A Pastry Moulding Roller Kalmeijer KGM NEUHumber : KalmeijerType : KGM 250NEWorder number : 1100.932 ADedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

1100.936 A Pastry Moulding Roller Kalmeijer KGM NEUHeducator : KalmeijerType : KGM 250NEWPorchion number : 1100.936 ADedetails see picturePLUS pointsHeating the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.922 A Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWSorp number : 1120.922 ADedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.925 A Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWPorchion number : 1120.925 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

pressure: 125 t plate thickness: 2 mm no. of strokes: 100-1000 Hub/min Control: Bruderer total power requirement: 50 kW weight of the machine ca.: 23 t dimensions of the machine ca.: ca. B 3 x L 6 x H2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm -Accessories: including foot control -Dimensions: 860/640/H1850 mm -Weight: 273 kg

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

UN75 Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance. Temperature Working temperature range at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C Setting accuracy temperature up to 99.9 °C: 0.1 / from 100 °C: 0.5 Setting temperature range +20 to +300°C Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit Standard equipment Works calibration certificate Calibration at +160°C Door fully insulated stainless steel door with 2-point locking (compression door lock) Internals 2 stainless steel grid(s), electropolished Stainless steel interior Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Volume 74 l extured stainless steel casing Dimensions w(D)  ...

Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB45/S -Motor: 3.3/4.1 kW -Speed speeds: 60 - 1530 rpm, continuously variable -Feed: 0.15/0.2/0.3/0.36 1/rev. -Table size: 450 x 600 mm, travel 640 mm -Spindle mount: MK4 -Spindle stroke: 180 mm -Throat: 350 mm -Columns Ø: 200 mm -Dimensions: 1050/720/H2000 mm -Weight: 728kg

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

SOUND TOP ENERGY 250 – COSTAN Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production 2016 – 2017-2018 Dimensions: (additional dimensions can be found in the details of the images) Length: 250cm Depth: 75cm Height: 230cm Technical details: Very recent vintages: 2016 – 2017 - 2018 State-of-the-art product Regenerated Equipped with Automatic Defrost Inverter. R290 Propane Gas LED Lighting Plug-ins Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 780Lt Each product is refurbished, freezer line is tested and cleaned internally and externally. Ready to use

Exhaust Gas Stack Self Standing 40m Corten Steel with 3 x 900 mm Inner Pipes Good condition self-standing exhaust stack made of Corten steel, insulated and painted outside. Stack height 40 meters and it is equipped with service platform on the top, flight lights and stairs. Originally serving for Wartsila 7 MW Gas Engines which has been running only about 30 000 hours. Manufacturer Vesmeta, Finland Manufacturing year 1999 Stack height 40 m Stack outer diameter 2.6 m, with flanges 3.0 m Outer pipe material Corten E, thickness 8-4 mm Inner pipes 3 x 900 mm Corten E, wall thickness 4 mm Insulation Mineral wool 100 mm

Drilling machine, pillar drilling machine, pillar drilling machine, pillar drilling machine, tapping machine, thread cutting machine -Manufacturer: Alzmetall, column drill type AB 3 ESV -Motor: Loher 1.5 kW -Speeds: 110 - 1450 rpm, continuously right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle mount: MK3 -Spindle stroke: 170 mm -Throat: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830 mm -Weight: 398 kg with pallet

Standard Inductive Sensor BALLUFF BES01ZN BES M12MI-PSH80B-S04G 10 - 55 V DC Range: 8 mm Thread: M12 x 1,0 Length: 50 mm 2x Nut, Wrench Width: 17 mm connector Appliance plug: M12 x 1, 4-pin Material: Brass, nickel plated, LCP ( Active Area ) New ! Dimensions (sensor, without nuts): 65 x 12 x 12 mm Dimensions (packaging): 150 x 105 x 15 mm

Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm

Standard chemical pump, Centrifugal pump without motor, Water pump, Chemical pump KSB CPKN - C1 025 - 200 Q: 3,0 m3/h H: 50.0 m n: 2905 rpm shaft diameter: Ø 24 mm, Wavelength: 50 mm Groove width: 8 mm Input: Inner Diameter: Ø 41 mm flange diameter: Ø 90 / 150 mm bolt circle diameter: Ø 110 mm hole diameter: Ø 17,5 mm output: Inner diameter: Ø 25 mm flange diameter: Ø 68 / 114 mm bolt circle diameter: Ø 85 mm hole diameter: Ø 13.5 mm Material (pump housing): Stainless steel ( 1.4408 ) New ! Dimensions: 465 x 295 x 340 mm

Standard Inductive Sensor BALLUFF BES01PN BES M12EG-PSC80F-S04G 10 - 30 V DC Reach: 8 mm Thread: M12 x 1,0 Length: 40 mm 2x Nut, Wrench Width: 17 mm connector Connector: M12 x 1, 4-pin Material: Brass, nickel plated, BPT ( Active Area ) New ! Dimensions (sensor, without nuts): 65 x 12 x 12 mm Dimensions (packaging): 150 x 105 x 15 mm

Press area: 5000 mm x 1800 mm; Design: Wall mounting; Number of manual hydraulic cylinders: 6; Pressing pressure: 1500 kg; Cylinder stroke: 60 mm; Hold-down: 1; Machine length: 5000mm; Machine Width: Machine height:

Robust, high-quality welding rotator with a load capacity of 10 tons. Diameter range: 100-4000 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

- Grapes: 500 kg - Dimensions: height 100 cm, diameter 90/95 cm - Condition: OK / Used

Description: Support surface 300x80 mm Tube height 270 mm weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 500 x 300 x 400 mm

Standard Inductive Sensor, Inductive Sensor BALLUFF BES01C0 BES 516-325-BO-C-03 10 - 30 V DC Reach: 2 mm Thread: M12 x 1,0 Length: 40.5 mm 2x Nut, Wrench Size: 17 mm Connection: Cable, 3-pin Material: PA 12 ( Active Area ), Stainless Steel ( Housing Material ), PVC ( Sheath Material ) Connection Cable: Length approx. 3.0 m New ! Dimensions (sensor, without nuts): 60 x 12 x 12 mm Dimensions (packaging): 250 x 230 x 20 mm

Standard Inductive Sensor, Inductive Sensor BALLUFF BES01U1 BES Q08ZC-PSC20B-BV06 10 - 30 V DC Range: 2 mm Connection: Cable, 3-pin Material: PBT ( Active Area ), Zinc, Die Casting ( Housing Material ), PVC ( Sheath Material ) Connection Cable: Length approx. 6,0 m New ! Dimensions (sensor, without cable): 40 x 8 x 8 mm Dimensions (packaging): 250 x 160 x 20 mm

Description: Power range: 2/3 HP 1.5/2.2 kW Speed range: 1450/2900 rpm Installed polishing wheel diameter: approx. 250 mm With replacement polishing wheels as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,090 x 600 x 1,320 mm, weight approx.: 250 kg

Description: Each with digital display Measuring ranges ,0 to 25 mm Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 5 kg

Key data: 3 KW, 4 kVA, 10000 V

Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...

Description: Voltage 230 V , 4 spotlights , Adjustable in height Approx. Onsite Dimension. (l x w x h): 800 x 5 x 1,100 mm, weight approx.: 20 kg

Description: Advantages: Approx. Onsite Dimension. (l x w x h): 290 x 110 x 1,700 mm, weight approx.: 5 kg

Description: serial number: 1314303 Approx. Onsite Dimension. (l x w x h): 2,300 x 1,500 x 1,900 mm, weight approx.: 1 kg

Bystar 3015 5.2 KW Hours of operation: 30.100 h (stand 11.04.2017) Cutting hours: 10.760 h (stand 11.04.2017) Year of construction: 2004 Available from: August 2017

Operating hours machine: approx. 59,000 h (stand 11-21) Operating hours laser: approx. 11,000 h (stand 11-21) Working area X x Y x Z: 3048 x 1524 x 170 mm Laser Laser Type: DC Semiconductor Excitation Laser power CW: 4400 Watt Laser power range: 150 - 4400 Watt Machine CNC control: Bystronic Byvision Cooling unit: E. Furrer WKL 430 Dust collector: Donaldson Torrit DFPRO 6 SPRK Total electrical connection: 52 KW machine + 5.5 KW suction Space requirement approx.: 12,900 x 7,100 x 2,070 mm Total weight approx.: 15.000 KG Cutting material types and thicknesses Steel ( EN 10027-1 S 235JR+AR o. correspondingly. Raex quality) 25 mm Inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm Aluminum alloys (e.B. 3.3535 AlMg3 ) 12 mm Machinery Standard: • Cutting machine with operator protection according to occupational health and safety regulations in the cutting, lo ...

working hours machine: 59,000 h (stand 11-21) working hours laser: 20,000 h (stand 11-21) working range X x Y x Z: 3048 x 1524 x 170 mm laser laser type: Raycus Fiber RFL-C 3000 S (single module) laser capacity CW: 3000 Watt laser range capacity: 300 - 3000 Watt cutting head: Raytools with auto-focus Machine CNC-control: CNC Bystronic Byvision cooling unit: S&A CWFL-3000 ANS dust extraction: Donaldson Torit DCE – DFPRO 6 electrian capacity total: approx. 37 KW machine + 5 KW dust extraction space needs approx.: 12,900 x 4,000 x 2,350 mm total weight approx.: approx. 13,000 KG cutable materials and thicknesses mild steel ( EN 10027-1 S 235JR+AR or rec. Raex quality) 25 mm inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm aluminum (e.B. 3.3535 AlMg3 ) 12 mm brass 10 mm machine description standard options: • cutting machine with operator safety advice ...

Operating hours machine: approx. 7,700 h (stand 12-19) Laser operating hours: approx. 3,500 h (stand 12-19) Working area X x Y x Z: 3048 x 1524 x 70 mm Laser Laser Type: Fiber IPG Laser power CW: 6000 Watt Laser power range: 600 - 6000 watts Machine CNC control: Bystronic Byvision Cooling unit: E. Furrer WKL 90 Dust collector: Donaldson Torrit DF PRO + 3-SPRK Total electrical connection: 30 KW machine + 3 KW suction Space requirement approx.: 11,000 x 6,050 x 2,565 mm Total weight approx.: 12.000 KG Cutting material types and thicknesses Steel ( EN 10027-1 S 235JR+AR o. correspondingly. Raex quality) 25 mm Inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 30 mm Aluminium alloys (e.g. 3.3535 AlMg3 ) 30 mm Machinery Standard: • Cutting machine with operator protection according to occupational health and safety regulations in the cutting, loading and unloading  ...

VERTIGRAN ENTGRANNER Power 80 t/h 30 kw immediately available Mob. +491715213204

Sheet: 3000x 1500mm Laser: 4000w Auto pallet changer / Extraction

3000 x 1500mm Year: 2004 Cutting hours: 21,350 Turbo: 37,990 With Byloader / Pallet change

CNC laser cutting machine Bystronic Bystar 3015 - Total power 125 KVA Co2 laser source Bylaser Power 5200 watts, CNC rotary axis for chuck 315 mm with counter bearing for pipe processing cutting power ST37 - approx. 25 mm stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm cutting speed max. 50 m/min, positioning simultaneously max. 113m/min car. Loading device Byloader with sheet metal dusting device Only one-layer operation ! approx.27,500 power-on hours - approx. 6000 hours of laser hours; ready for immediate use

Laser cutting machine Bystar 3015 with Bylaser 4000 , 4 KW laser source incl. interchangeable table system, cooling system, kompl. Switch cabinet combination with CNC and laser control, operator protection in the cutting area, 2 cutting buttons, reflection absorbers, cross-jet , documentation documentation laser a 19,000 h maintained by Bystronic.

Bystar 3015 5.2 KW operating hours: 30,100 h (as of April 11, 2017) cutting hours: 10,760 h (as of April 11, 2017) Year of construction: 2004 Available from: August 2017 ; ready to use

Bystar 4025 NT 65 plate size:6500mm x 2500mm changetable system axis of rotation: 15 - 315mm 4.4 kw CO2 laser steel up to 25mm switching hours 18000 vacuum pump 16000 With filter system is already dismantled; ready for immediate use

3000 x 1500mm 4400w 38,000 hours With Rotary Axis