stand by used for sale

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

Edwards pump station consisting of: Rotary vane vacuum pumps: Edwards E1M175 Booster pump Rootspumpe: Edwards EH1200 Condition: used General overhaul of the devices is possible with a warranty of 12 months. Delivery time: In stock; ready for operation

Standing molasser

Rothenberger Stehbolzenausdreer. NEW and unused or with stock tracks. About 20 shepherd's boxes M12 are best than a decrease. Price is per piece not per shepherd's box. Of course, singles positions are also possible, please enquire. Also very extensive metric sizes, as well as 6, 7, 9, 10, 10.5, 11.5, 13, 14, 16, 20, 22 Inch sizes 3/16, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price! (Changes and errors to technical data and prices reserve ...

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Technical data Speed 1420 rpm. Engine power - 400 volts 2.2 KW Shaft diameter approx. 35 mm Size polishing disc diameter 500 mm Weight approx. 260 kg Dimensions (LxWxH) approx. 1450 x 400 x 760 mm

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

Drive power 0.73 kW

We have 2pcs MAK 6M20 standard Crankshafts in our stock available for Sale. MARKING 1) 34072 221 6916 34crNi Mo6v 86026 GL 1517 LLOYDS BER500241 51981B 653009 2) 24072 221 6915 34crNi Mo6v 86026 GL 1513 LLOYDS BER500585 51981B 653007

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

Loading mobile for 200 litres standard car

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

Separating table,stainless steel. standing on 4 legs,roller conveyor in the bottom,L 990 x W 570 mm

: neu : ca. 10 Wochen ab Auftrags : Italien : 100 to : 5 mm : 1000 mm : 630 mm : 180 mm : 15 - 140 mm : 45 - 70 1/min : 8 : 90 mm : 320 mm : 570 mm : 11 kW : 1320 mm : 2200 mm : 3080 mm : 10000 kg 8-fold ram guide fixed table semi-automatic stroke adjustment motorized ram adjustment Variable speed motor hydraulic overload protection dynamic braking platen automatic circulation lubrication front protection by photocells user manual in GERMAN or ENGLISH Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - Press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector The data for this ad was created with ModulMWS - the softwa ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 160 to : 6 mm : 1200 mm : 650 mm : 200 mm : 16 - 160 mm : 35 - 55 1/min : 740x420 mm : 8 : 100 mm : 330 mm : 690 mm : 15 kW : 1410 mm : 2220 mm : 3544 mm : 16000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 630 mm : 10-25 mm/s : 300 mm/s : 750x625 mm : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6200 mm y-travel: 1070 mm z-travel: 1000 mm Table dimensions: 1030 x 8000 mm control: Siemens Sinumerik 8 MC taper ISO: 50 spindle speeds: 15 - 1595 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

pressure: 25 t throat: 250 mm stroke: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 1000 x 1700 x 2600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 320 mm stroke: 8 - 120 mm table-size: 800 x 600 mm ram surface: 500 x 400 mm throat: 315 mm dayligth: 410 mm ram adjustment: 70 mm no. of strokes: 56 / 90 Hub/min total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions: 2,10 x 1,52 x 2,72 m inclinable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm total power requirement: 97 kW weight of the machine ca.: 25000 t dimensions of the machine ca.: m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V -  ...

x-travel: 8000 mm y-travel: 1000 mm z-travel: 1250 mm dividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mm clamping plate: 1500x4000 mm clamping plate: 1500x4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t Table dimensions: 1000 x 360 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition machine was overhauled new control optional you can buy a shifting table as well optional you can buy a surrogate column as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm turning height: 1500 mm turning diameter over bed: 2700 mm turning speeds: 1,9 - 60 (16x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 415 taper ISO: 50 P.D.B. spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2750 mm y-travel: 400 mm z-travel: 325 mm spindle taper ISO: 50 throat: 450 mm turning speeds: 31,5-2000 U/min Feed: 0,4-200 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 20000 mm y-travel: 2800 mm z-travel: 1050 mm control: Heidenhain 530i taper ISO: 50 P.D.B. spindle speeds: 0 - 2000 mm voltage: 380 V total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm turning height: 1500 mm turning diameter over bed: 2400 mm table load: 10 t turning speeds: 2 - 100 (18x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 200 to : 1200 mm : 1000 mm : 250 mm : 180 mm : 35 1/min : 900x700 mm : 18,5 kW : 2400 mm : 1650 mm : 4000 mm : 18500 kg 8-fold ram guide light guard motorized ram adjustment hydraulic overload safety device motorized lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.