stamping used for sale

Impact force, infinitely adjustable, max. 5 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 10 mm; spindle stroke max. 40 mm; usable spindle stroke max. 30 mm

Impact force, infinitely adjustable, max. 5 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 10 mm; spindle stroke max. 40 mm; usable spindle stroke max. 30 mm

equipped with double crankshaft with rear gear transmission; incl. decoiler; bending machine for strip material; Sound-absorbing cabinet and outfeed belt

Impact force, infinitely adjustable, max. 25 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 20 mm; spindle stroke max. 60 mm; usable spindle stroke max. 40 mm

Impact force, infinitely adjustable, max. 5 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 10 mm; spindle stroke max. 40 mm; usable spindle stroke max. 30 mm

Impact force, infinitely adjustable, max. 5 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 10 mm; spindle stroke max. 40 mm; usable spindle stroke max. 30 mm

Impact force, infinitely adjustable, max. 5 kN; Max. stroke sequence per hour approx. 1500; Spindle retraction to impact release approx. 10 mm; spindle stroke max. 40 mm; usable spindle stroke max. 30 mm

Capacity: 800 tons Stroke of slider: 400 mm Distance between table and slider 850 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons

Peddimax 1002 combi punch/shear/notching with CNC Siemens X amp; Y positioning table for punchstation with CNC MPS pushfeed system gt; 6 meter for auto cutting flat steel (with hydraulic workpiece clamping) with conveyor belt for cut pieces central lubrification Dia x sheetthicknessdia: dia 31 in 25 mm / dia 90 in 10 mm Depth of throat 510 mm Max hole dia. Ø 90 mm Max cutting-thickness in plate: 500 x 20 mm Blade length 510 mm 90°-cut corner 150 x 150 xnbsp; 12 mm 45°-cut corner 100 x 100 x 12 mm Cut to length round/square 50 mm Max material -thickness by notching: 90 x 52 x 13 mm Punching pressure: 100 ton Power needed: 11 kW Length: 1980 mm Depth: 1020 mm Height: 2060 mm Weight: 3 ton

Connected load: 7.5kW, documentation available.

Size: 260 x 380 mm Technical details: Printing area: 260 x 350 mm Min. size: 40 x 70 mm Max. size: 260 x 380 mm Power: 1,25 KW Net Weight: 1100 Kg Measurements: 1680L 1240W 1850H Equipments: hot foil system: original HEIDELBERG

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

Section Cutting - round bar: 50 mm - square bar: 50 mm - C amp; I profiles: up to 160 mm Notching - rectangular: 52 mm - material thickness: 13 mm Punching - 33 x 20 mm - 30 x 20 mm - 55 x 12 mm - 38 x 15 mm - bending cap: 250 x 20/10 mm Shearing Flatbar - 380 x 20 mm - 480 x 15 mm - angletrim: 120 x 15 mm Angle Cutting - at 90°: 150 x 15 mm - at 45°: 80 x 10 mm Punching pressure: 85 ton Max sheet thickness by punching + nibbling: 33 x 20 mm Max punching dia: 55 x 12 mm Length: 1830 mm Depth: 790 mm Height: 1920 mm Weight: 2620 kg

Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton Slider force at the distance of 250 mm in the lower dead point: 350 ton Number of single strokes per minute: 11 Slider stroke: 630 mm Slider adjustment: 630 mm The closed height: 1165 mm Table pillow: -Max. stroke: 250 mm -Stroke adjustment: 250 mm -Max. holding force: 250 ton -Max. ejection force: 40 ton Table dimensions: 4000x1800 mm Bolster dimensions: 3950x1800 mm Table gap: 3750x1300 mm Main motor power: 132 kW Stay spacing: 4000 mm Press weight: 215000 kg

max plate dimensions: 1005 x 500 mm toolchanger with 10 positions max 120 str/min with large selection of tools! Punching pressure: 20 ton Max sheet thickness by punching + nibbling: 6 mm Max punching dia: 40 mm Length: 2300 mm Depth: 1700 mm Height: 1900 mm Weight: 4,5 ton

with CNC X amp; Y positioning table for punchstation equipped with 3 punching units which can be selected with the CNC control Fagor Electric backgauge for flat shear Punching cap: 100 ton Dia x sheet thickness: 31 x 26 mm / dia 100 x 8 mm 28 strokes/min Depth of throat: 610 mm Max hole dia: Ø 100 mm Max cutting-thickness in plate: 600 x 15 mm /nbsp;400 x 20 mm Blade length: 605 mm 90°-cut corner: 152 x 152 x 13 mm 45°-cut corner: 70 x 70 x 7 mm Cut to length round/square: 50 mm Max material thickness by notching: 90 x 52 x 13 mm Power: 9 kW Weight: 3,3 ton

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

Universal - Register punch Karl Tränklein - Type.: USM 900 - Year of construction: 1992 - Masch. Product no.: 1745 - Table size: 900 x 600 mm - Insert height: max.- 80 mm - with several punching heads

Model: Super 210 - 20 (electro mechanical) with electric backgauge with feed-in table with large selection of tools Punching cap: 100 ton Dia x sheet thickness: 30 xnbsp; 25 mm / 90 x 8 mm Max cutting-thickness in plate: 250 x 20 mm Blade length: 300 mm 90°-cut corner: 160 x 100 x 15 mm 45°-cut corner: 150 x 100 x 14 mm Cut to length round: 55 mm Cut to length square: 50 mm Max material thickness by notching: 16 mm Length: 2250 mm Depth: 1210 mm Height: 2420 mm Weight: 4250 kg

force: 80 ton punching cap: dia 25 x 23 mm / dia 50 x 12 mm stroke: 100 mm depth of throat: 310 mm power: 7,5 HP

with hydraulic plateclamp for shear Punching cap: 80 ton Dia x sheet thickness: 40 xnbsp; 15 mm / dia 60 x 10 mm Depth of throat: 510 mm Max cutting-thickness in plate: 500 x 20 mm /nbsp;400 x 19 mm Blade length: 510 mm 90°-cut corner: 120 x 120 x 13 mm 45°-cut corner: 90 x 90 x 10 mm Cut to length round: 45 mm Cut to length square: 40 mm Max material thickness by notching: 90 x 10 x 13 mm

Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355

Platen with Hotstamping

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000

RATED CAPACITY TN 2500 INTERMEDIATE SHAFT YES CONNECTING ROD N° 1 SLIDE STROKE MM 350 CONTINUOUS STROKE PER MINUTE N° 60 SINGLE STROKE PER MINUTE N° 14 DIE SPACE MM 890 DIE SPACE ADJUSTMENT IN THE TABLE MM 10 TABLE DIMENSIONS L TO R MM 1200 F TO B MM 1400 SPACE BETWEEN UPRIGHTS MM 1320 RAM DIMENSIONS L TO R MM 1070 F TO B MM 1120 SUPERIOR KNOCKOUT POWER TN 6 STROKE MM 50 PUSHERS N° 1 LOWER KNOCKOUT POWER TN 10 STROKE MM 50 PUSHERS N° 1 DIMENSIONS SIDE E931468 WINDOWS LEFT RIGHT MM 720 HEIGHT MM 890 MAIN MOTOR POWER KW 132 OVERALL DIMENSIONS L TO R MM 5350 F TO B MM 4680 HEIGHT ABOVE FLOOR LEVEL MM 6840 PRESS TOTAL WEIGHT TN 198

Punching tools for window construction -different types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete -Weight: 50 kg

Stempelmaschine STEFAN HERTWECK KG Type D1 0,09 kW 220 / 380 V Year of construction: 1989 used, tested ! Dimensions: 850 x 700 x 1050 mm

Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct

electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles,

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Register punch Masch-No.: 52757/6 with printer 2 FA-OR. Cutting length 315 mm, depth 4 mm, max. 40 mm. Cutting thickness max. 7 mm. Clamping thickness: 1-9 books, max. 50 mm. Spine length max. 400 mm. min. Book width: without printer min. 4 mm cutting depth, max. book thickness 10 - 88 mm (with printer up to 95 mm). Connection 220V, 50/60 Hz, compressed air 6 bar, max. Speed 120/ min. Various knife sets

Die holder, notching tool, punching tool, punch, punching die, punching punch, punching punch, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: Shots 105 - 80 mm -Total dimensions: Ø 150 x 60 mm -Weight: 4.7kg

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 52 mm -Type: Mubea 52 -Total dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Praegeflaeche / Embossing surface 100mm x 133mm Einsatzhoehe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Praegetemperatur / Embossing temperature 50°C - 400°C Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

capacity 315 ton., table 1250x2500mm., stroke 400mm., shut height 750mm., number of strokes per min. 25, weight 50,9ton.

Type: 115XS Punching cap: 115 ton Dia x sheet thickness: 34 xnbsp; 26 mm / 55 x 16 mm Max cutting-thickness in plate: 380 x 25 mm Blade length: 610 mm 90°-cut corner: 150 x 18 mm 45°-cut corner: 80 x 10 mm Cut to length round: 55 mm Cut to length square: 55 x 55 mm Max material thickness by notching: 13 mm Power: 7,5 kW Punching pressure: 115 ton Length: 1880 mm Depth: 790 mm Height: 1990 mm Weight: 3,1 ton

Platen press / Diecutter - clamp shell die cutter Make Crosland Model A2 Year 1960 ? Max size 46 x 67 mm Details 2 chases Available direct

max. format 50 x 70 cm Built in 1952 Hot foil embossing device HAKRO Computer control with digital display 2 heating zones Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Stamping standard

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Yawa TYM 790 Age: 2015 DESCRIPTION: Max. sheet: 790 x 560 mm, Min. sheet: 310 x 210 mm, Max. die-cutting area: 750 x 520 mm, Max. hot-stamping area: 760 x 525 mm, 3 longitudinal foil shafts, 2 transversal foil shafts, 6 x separately adjustable heating zones Features: Efficient and easy to operate. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting. Five pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy. Air blast system helps to separate foil from stock on critical jobs. Accurate and programmable control system with servo motor and encoder. Micrometer adjustment on side guide and front gripper guide. Mechanical dwell on impression guarantees perfect foil stamping/foil embossing performance. Missed sheet detector. Honeycomb base is convenient for loading. 6 heating zones with digital control. 24 ...

Machine: Gallus R250 Internal Machines No.: 567 Internal C3 No.: Variant 5 Printing Process: Letterpress Printing Units: 5c+Varnish Own Coating Unit: YES Printing Ink: UV Printing Inks Drying: UV Drying Painting-partial: YES / Flexo-Cliché Painting-full-f.: YES / Flexo-Cliché Varnishes: Gloss Varnish, Matt Varnish, TTF Varnish, Luminescent Varnish Lamination: NO Paper material width: min. 130mm / max. 270mm Print width: max.: 255mm Printing capacity: max. rolls Ø - From: 700mm / max. rolls Ø - On: 700mm Punching width: max. 255mm Pressure feed: min. 304.8mm (96T) Pressure feed: max. 596.9mm (188T) Format punching: Flat & rotary WGR 220 Punching units: 1x flat / 1x rotary Flat Stamping: YES Punching Plate: YES Punching Cylinder: YES Airshock Cylinder: YES Upper punching: YES Bottom punching: YES with pass. Umfg. to the Upper Punches Sheet Cutting (Cross) / Sheet C ...

Codimag viva 340 waterless offset 8 colors Electrical equipment and control panel. Longitudinal cutting device with 4 knives. Plate bending device for waterless plates Base with register trolley with flexographic printing unit for varnishing including varnish pump and anilox roller (angle 60°, grid width 80L/cm, volume 9 cm³/m²) Magnetic cylinder for Flexowerk Stork screen printing units each with base and register carriage including ink pump and automatic ink level control UV drying 8 statons Make IST, type M40-8x1-MBS-G-Co-CMK-SLC4 printing units à 120 Watt 4 printing units each 160 Wat (printing unit, varnishing unit, 2xscreen printing) Air-cooled spotlight unit including CMK reflector, telescopic slide and SLC stepless power control Hot foil stamping unit with servo drive incl. -1Hot foil stamper -Foil saving circuit -Special base with register trolley -electronic e ...

NILPETER MO4 – 8-color  Year 2010  8 colors including 6 offset DW2 – DW7  2 stamping units and register control  With roll lifter and edge control  2 Corona system Vetaphone 2 kw, Teknec web cleaning  First platform Delam Relam, turning cross on rail  MO stations : Color control system GMI Mircocolor 1 lifting control and color agitator  M - station flexo  Stamping unit : 2 stamping units 1 x with K B Gapmaster  Nonstop grid with transport wall  GEW UV system : Rhino/E2C  Cooling Unicold TAE 081  Baldwin Water Treatment Basic Liner 4.0 L  Main control panel with GMI  Silkscreen inserts 1 Stork RSI  Flexo: 3 cameras, ink pump  Lamination units : 3 stations on rail Down or up  1 plate bending system  BST camera (passport control) print formats 19 – 25 throughout  with accessories   ...