stainless used for sale

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

various large foods available: Always full wine-hater 220 l diameter: 550 mm Immer-weinhaelter 530 l diameter: 820 mm Immer-weinhaelter 1100 l Diameter: 1000 mm Immer-Weinhaelter 2200 l diameter: 1400 mm; NEW - best condition

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Standing cylinder-conical tanks (distrib), fermentation tanks with 2 bar pressure tanks are built and ready for pickup in 35390 GieÃ?en Dimensions: Ã? 3.80 (including ISO) Ã? 12.5 m high insulation: 15 cm

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

2 with each ca 1000 l  

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

20,000 liters tank with thermal insulation not used tanks

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Two stainless steel tanks with drain. About 1500 l individual was sold

Exhibition model) - Material : DIN 1.4301 - Inner surface: IIId, welds stained and ground - Outer surface: Sheath sanded-SBR - Volume : approx. 1940L Dimensions: - Diameter : approx. 1110 mm - Sheath height : approx. 2000 mm - Ground clearance: approx. 400 mm - Total height with boom : approx. 2900 mm Equipment : - 3 adjustable feet - Rectangular door 420x320 mm - Residual drain with ball valve NW50, DIN 11851 - Clear drain with ball valve NW50, DIN 11851 - Stand indicator with handwheel - Sampling with handwheel - Dip shaft sleeve with digital thermometer - Pillow plate - Holder for labeling board - Ladder bracket - Mobile lid with NW50 connection, pump and air hose - Winch to lift the lid

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 cph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.