stainless used for sale

Stainless steel ball valve, ball valve, 3 parts, full passage MECAFRANCE, MF DN40, PN40 installation dimensions: 110 mm thread: G 1 1/2 ( inch ) length hand lever: 200 mm material: stainless steel ( 1.4408 ), seal of the spindle: PTFE used, tested ! Dimensions: 265 x 79 x 180 mm

Stainless steel tee, stainless steel pipe elbow, welding elbow -Size: DN 40 316L -Size: DN 20 316L -Price: complete -Number: 28 pieces DN 40 -Number: 16 pieces DN 20 -Weight: 8 kg

Used lifting mixer HABEMFA for 50 kg dough - Stainless steel boiler - for 30 kg of flour or 50 kg of dough - Stainless steel kneading arm - with protective grille - 2 forward gears - 1 stop button - repainted - technically tested, cleaned - very nice condition - immediately ready for use. Inspection and test run are possible by arrangement.

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Heated - Cooled Reactor with a liquid volume of 12.000 liters. Our reactor has been used very little and is jacketed on the outside. Feet and stainless pressure pipe, stainless raw material addition funnel will be given together. Its engine is 22 kW and it is GAMAK brand. The reducer is German made Flender Motox brand. The cambers are 8.5 mm, the body is 6 mm thick. Jacket thickness is 5.8 mm. Produced by Şenlikoğlu Inoks in 1997, it was used for 2-3 years and then kept idle. This machine is one of the machines in my plant, actually I built my entire plant by spending over 200,000 USD. I want to continue the business by selling 1 machine in it. I really dont know the price of a single reactor as I bought the complete plant. But if I cant sell 1 reactor, I will sell the entire plant.

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 630 mm / hole spacing 620 mm -Quantity: 1x handle available -Dimension: 630/40/H10 mm -Weight: 0.4 kg

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 700 mm / hole spacing 690 mm -Quantity: 1x handle available -Dimension: 700/41/H10 mm -Weight: 0.5 kg

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 695 mm / hole spacing 685 mm -Quantity: 1x handle available -Dimension: 695/37/H10 mm -Weight: 0.5 kg

Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

This is a Stainless Steel Double Jacket 250liter Vacuum Reactor system used in pharmaceutical or other applications. It is equipped with a vacuum pump able to reach -15psi and heating through oil or water bath. Inside it has a good overhead agitator and an additional bottom stirring system which will not allow any material lay down and stand still. The bottom stirrer is missing its motor but it has ready for connection the cobbler where the motor would fit onto and should be adjusted according the RPM stirring needs of the application. Unit Specifications: - Vacuum Pump with 1hp AEG single phase motor with -15psi (checked to be in working condition) - Agitator Motor with manual RPM regulator (checked to be in working condition) - Double Jacket Oil Heating System with 3 X 6kw resistances (cheched to be in working condition). Total heating 18kw - Capacity 250liter - Stainless Stee ...

Stainless steel steam reactor with agitator capacity 3,000 lts Description Process reactor of 3,000 liters made of stainless steel. It has: agitation with propeller, four baffles, klopper bottoms, manhole on top, tubular coil throughout the container, product inlets on the top, outlet on the bottom bottom and four support legs. Motor power: 5 kw. Test pressure: 10.6 bar. Features Year: 2001 Width: 1800 mm Height: 4600 mm

Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket.

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

cylindrical standing single-walled stainless steel container Content 50 litres Material 1.4301 Operating temperature 40 C Propeller agitator kW 0.37, 1.405 rpm the interior of the container is coated with plastic Spout at the bottom center

Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport.

Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!

Used stainless steel pressure leave filter made by Padovan. 27 leaves.

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

Used stainless steel reactor, AISI 316 steel with a capacity of 12.000 L. New 1980. Technical data: Total capacity: V 12 m3. Pressure 6 Bar. Ex 22 kW motor. Dimensions fi 2200 mm, height 3110 mm.

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

2 centrifugal pumps / centrifugal pumps, self-priming Type: KSP 50 /150-2.3 Manufacturer: Kyhäuserhütte Artern, Germany Power: 10,000 l/h Speed: 1,420 rpm. Head: 14 m Connections: Inlet NW 50 / Drain NW 50 Design: Stainless steel Media: beer, AfG, milk, lye, etc. Connection values: 380 V, 50 Hz; 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

Two stainless steel tanks with drain. About 1500 l individual was sold

Mobile stainless steel tub table with two tubs (up and down on the frame) As good as new Dimensions outside: approx. 214 x 88 x 91 cm (length x width x height) Dimensions Inside: approx. 211 x 85 x 14 cm (length x width x height)

Stainless steel elbow, welding elbow -Size: 40 x 1.5 mm 90° -Price: complete -Number: 39 pieces -Weight: 7 kg

lying, insulated stainless steel tank with 2 concrete brackets (25 m high) Volume: 20 m3 Dimensions: 3.30 m x 3.00 m long

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H800 mm -Weight: 82 kg

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H930 mm -Weight: 82 kg

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Stainless Steel Pressure Expansion Tank 50 L Frequency: 50 Hz Price: on request

Stainless steel conveyor screw with geared motor

There are seven stainless steel tables available, dimensions table 1: 1890x800x960mm, table 2: 1490x800x900mm, table 3: 2150x740x840mm, table 4: 1900x800x960mm, table 5: 2900x1200x910mm, table 6: 2200x700x850mm, table 7: 200x800x940mm.

Description: 2 x Stainless Steel Work Tables Dimensions per table: 1020x620x840mm Weight per table: 45kg Approx. Onsite Dimension. (l x w x h): 1,020 x 620 x 840 mm, weight approx.: 90 kg

Description: Stainless steel kitchen equipment - sink , Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,040 mm, weight approx.: 45 kg

Separating table,stainless steel. standing on 4 legs,roller conveyor in the bottom,L 990 x W 570 mm

Filling machine stainless steel Ada type 2 with 4 filling nozzles

Rotating grater stainless steel,Ø 120 x L 180 mm,2,2 kW variable speed.

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Stainless steel work table with lower shelf with 1x drawer The others are unfortunately missing Very solid, stable robust and heavy! Metrics: Height: 90cm Width: 300cm Depth: 88cm

Stainless steel work table with lower shelf with sheet metal storage Sheet metal dimensions: 47x60cm Height: 85cm Width: 160cm Depth: 80cm