stainless used for sale

Overview This 5 HL brewing equipment was built in 2022 by Polish manufacturer Minibrowary. It was only installed and dismantled in the same month. Equipment Brew kettle/mash tun Vertical tank working capacity of 5 hl, mounted on three supports welded to the cylindrical part supports have adjustable feet with a height adjustment of up to 60 mm, allowing for the leveling of the tank. cylindrical tank is entirely made of stainless steel The brew kettle also serves as a mash tun. The purpose of mashing is to dissolve soluble compounds of malt in water and enzymatically break down starch, proteins, and other compounds. Vessel is equipped with a steam heating system, stirrer, and sensor. The mashing temperature is appropriately regulated. It is possible to carry out mashing using infusion and decoction methods. Equipment of the Tank Two-level stirrer Gearmotor 60 rpm with variable speed contro ...

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 10 litre stainless steel boiler - 1x whisk for 10 litres boiler - 1x flat stirrer for 10 litres boiler - 1x kneading hook for 10 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 20 litre stainless steel boiler - 1x whisk for 20 litres boiler - 1x flat stirrer for 20 litres boiler - 1x kneading hook for 20 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 20 litre sta ...

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 40 litre stainless steel boiler - 1x whisk for 40 litres boiler - 1x flat stirrer for 40 litres boiler - 1x kneading hook for 40 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 40-litre sta ...

Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 60 litre stainless steel boiler - 1x whisk for 60 litres boiler - 1x flat stirrer for 60 litres boiler - 1x kneading hook for 60 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - additional 60-litre stainless steel boilers - additional ...

New machine 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + with integrated dust/spray protection cover + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + hydraulic boiler stroke with two safety switches + Stainless steel boiler support arms + closed planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 80 litre stainless steel boiler - 1x whisk for 80 litres boiler - 1x flat stirrer for 80 litres boiler - 1x kneading hook for 80 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request: - ...

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

Beer Brewery Two Vessel VELO 15hl/brew, two brews/day, up to 4000hl/annum Complete two vessel beer brew line made by Italian VELO (currently TMCI Padovan) suitable for various beer types from ALEs to LAGER’s, non-alcoholic beers to strong, over 10% Imperial Stouts. Normal brew size has been 1500 liters and during high season, they have brewed 2 brews during 10-hour day. Maximum batch of malt is 600 kg. Without adding sugar beer wort has been from 18.5 to 21 Plato and with sugar added, up to 35 Plato. One complete brew batch with CIP will take about 5-6 hours. In operation, this brewery has overlapped brew batches so that once the first batch of the day has been lautered and spend grain has been unloaded, they started next brew. Maximum weekly brewing capacity with 10 hour working days has been 6 brews (3x3000 liters CCT) due to fermenting tank capacity which leads to theoretical 40 ...

6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...

- CYPCUT - high-end CNC with German surface - IPG - laser source - Precitec Lightcutter - cutting head - Interchangeable table - 2 CCD cameras, 2 for indoor use, 1 x for control shuttle table - 2 years warranty -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - Fast Cutting Mode 24 months warranty Working area (mm) 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 4050 Y axis (mm) 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Heights – IPG Laser 4000 W 20 mm / steel - 16 mm /  ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 10.000 liter per hour., Standardization capacity: 15.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

WARWICK container systems lab/product development size cube blender in polished finish 316 grade stainless steel. Cube internal dimensions 265mm x 305mm x 405mm deep, gross capacity 33 litres, approx working capacity 15-18 litres. Top cover with clasp fastening. Stainless steel motor enclosure. Stainless steel control panel with variable speed, cycle time selector RPM or time 0-5mins. 240v 1ph. this extra information is standard for this model. Please always double-check the details during a visit The WARWICK Cube Blender represents a pinnacle in powder blending technology, specifically designed for pharmaceutical lab and product development applications. Crafted from high-quality 316 grade stainless steel with a polished finish, this blender ensures optimal hygiene and durability, meeting the stringent requirements of pharmaceutical manufacturing. With internal dimensions measu ...

Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available. Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

Agitator 150 litres with agitator 0.55 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Stirrer: Two-winged slanted blade stirrer, diameter 244 mm, material stainless steel 1.4581, wings adjustable at angle.

Used double-walled agitator 47 litres with agitator 0.12 KW Double-walled stainless steel container, approx. 47 litres container volume, externally heated up to 70°C with temperature control unit / water bath Haake DC 10 and circulation pump. With aluminium traverse made of profiles 45 45 mm and slow running agitator. Agitator with geared motor: Geared motor Georgii Kobold, 230 volts, 0.12 kW, n1 = 2800 rpm, n2 = approx. 20 rpm. Shaft: precision stainless steel shaft D20, length 300 mm, diameter 20 mm, Material stainless steel. Rigid clutch, bare, material stainless steel Stirring organ: Two-winged slanted blade stirrer, diameter 244mm, material stainless steel. Wings adjustable at angle Electric distribution box with 3 sockets 230V, circuit breaker and FI.

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.

New device 12-month warranty Advantages of cooled ice water: + stable low bulk water temperatures + accurate dough temperature control all year round + fast swelling when mixing without ice + woolier dough seam through freshly cooled, liquid ice water + exact dosing via water mixing and dosing device possible + water-carrying parts are made of stainless steel cleaning-free + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + powerful refrigeration machines + Refrigeration systems with expansion valve + electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchanger + insulated stainless steel ice water bath + Empty tap in the ice water bath + high flow rate + compact dimensions + easy-care surface structure + low energy consumption  ...

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

1 used filling line for ironing bottles. Original in use for filling beer (2C) in 330 ml printed glass bottles (diameter 60 mm x height 230 mm) with handle closure, with a capacity of 1,900 bottles/H. Additional format parts for 500, 750 and 1,000 ml bottles. E- connection 415V/50Hz. System has run very little and is in top condition! Consisting of: Task table, with 5 rows of stainless steel chains. Stainless steel frame, with inliner and adjustable drive. Built 2006. 1 bottle transport system for empty and full bottles. Stainless steel chain on stainless steel frame. Built 2006. 1 Rinser/Filler Monobloc, Make Cime Careddu (Italy), Type DPS 9-8, built 2006, 9-head rotating Rinser, no-bottle/no-spray, 8-head rotating back pressure filler with 2x pre-evacuation (built-in vacuum pump). Heights adjustable. Min/max bottle diameter 50 - 90 mm, min/max bottle height 180 - 350 mm. Drain CIP. Wi ...

It is an AERA slicer line for the preparation of cordon bleus. GENERAL TECHNICAL SPECIFICATIONS: - Overall dimensions of the bridge (L x W x H): 8000 x 4700 x 3800 mm. - Overall dimensions of the conveyor (L x W x H): 6400 x 1000 x 970 mm. - Overall dimensions of a slicer (L x W x H): 1880 x 1030 x 2460 mm. - Number of tracks: 4 - The maximum noise level of the line: 80 dba - Operation of the line: continuous - Capacity: 15000 products/h COMPOSITION: 1 platform with access staircase 1 packing conveyor 3 ribbon slicers suspended under the walkway 3 preparation tables on the bridge PACKING CONVEYOR - Overall dimensions (L x W x H): 6400 x 1000 x 970mm. - Weight: 970 kg - Sliding plane height: 960 +/- 50mm. - Stainless steel tubular legs and jacks - Synchronous tape width 600mm. - Lyre winding - Pneumatically operated belt quick release system Control by servo-mo ...

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.

Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...

Complete compact vertical packaging system including 10-head multihead weighing unit (1.3 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal parts or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching devi ...

Complete compact vertical packaging system including 10-head multihead weighing unit (2.5 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German etc. ),date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching device, sui ...

Complete compact vertical packaging system including 10-head multihead weighing unit (1.3 l/head), z conveyor, platform, outfeed conveyor and rotary table for finished products. Suitable for packing of bulk materials with irregular shape such as potato chips, cornflakes, biscuits, peanuts, sweets, shrimps, industrial parts in general such as screws, nails, metal or plastic components etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing ? vacuum is not generated), supporting device of finished bags, euro hole punching device, su ...

UN75 Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance. Temperature Working temperature range at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C Setting accuracy temperature up to 99.9 °C: 0.1 / from 100 °C: 0.5 Setting temperature range +20 to +300°C Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit Standard equipment Works calibration certificate Calibration at +160°C Door fully insulated stainless steel door with 2-point locking (compression door lock) Internals 2 stainless steel grid(s), electropolished Stainless steel interior Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Volume 74 l extured stainless steel casing Dimensions w(D)  ...

- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside

Romaco Fryma Koruma Dinex process mixing vessel suite in UNUSED condition comprising of the following:- Main Process Vessel: 1300L scraped wall, contra rotating, jacketed, full vacuum +6bar. Bottom entry homogeniser mounted in vessel base unit which also houses the hydraulic raise/lower powerpack for the vessel lid, vacuum pump, centrifugal CIP pump, shrouded in stainless steel. 8 off top connections and level sensor, 300mm dia hinged safety interlocked chargeport with sightglass and light. Scrape wall mixer 5kw, contra rotating mixer 4kw. 45kw 2865rpm homogeniser. Additional vessels: 1300L jacketed premix vessel on load cells, scraped wall mixer with baffles. 400mm dia safety interlocked hinged chargeport with sightglass and light. 4 off top entry infeed connections, 3 stainless steel lobe pump mounted onto vessel framework, 4 outlet with pneumatic actuated valve. 100L powde ...

Delitech IFOOMA 15 Liter Cutter Stainless Steel used Stainless steel cutter with 3 cutter head and knife shaft brake Two speeds for knife shaft and bowl The bowl is made of solid cast stainless steel and the case is made entirely of stainless steel. Since an auxiliary contactor is currently hanging, the machine does not stay on in 2nd gear. That's why we opened the case and saw the best workmanship here as well. The electronics are also installed in a stainless steel housing, which can be pulled out of the machine on rails to check the fuses, for example. Width: 815mm Depth: 590mm Voltage: 400V Power: 2.4/3kW knife shaft; 0.45/0.55kW bowl drive Knife shaft speed: 1400/2800rpm Bowl speed: 9/18rpm Knives: 3 Bowl volume: 15 liters Weight: 110kg Year of construction: 2016 Machine must be thoroughly cleaned before use. Video about test run available

Overview  The complete filling line for returnable glass is located at a brewery and was used for filling beer and lemonade. The line has been regularly serviced and is in very good condition. All machines are from 1995, except the unscrewing machine, which was built in 2005 and has a Siemens S7-300 installed.  Output: 10,000-12,000 bph at 0.5l  Formats: 0.5l Euro and 0.5l NRW  Closure: crown cap and screw cap Euro crate 4x5, modular crate 4x5, Euro pallet Slip ring rotor was recently replaced List of machines Decapper, 2 heads | Rink | KM740/2K | 2005  Unpacker, 2 heads | Joha | Opal 10 | 1995  Bottle washer | Krones | LAVAPUR KESK 168/16-80 | 1995  16 bottle cells In stainless steel Partially insulated  Bottle cell for 0.5 l maximum bottle size Finger feed Rotary tube spraying Heated with steam  Guide and housing at the rear recently completely renewed Lubrication points centr ...

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...