130,507 used machines on RESALE, but how to find them? Machine Search
Sold without content Batch that is part of a combination of batches
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m
Lot of MIG welding wire steel G3Si1 rolls - Ø1.0 mm (D300 / 15 kg per roll) Weight: 725KG net
Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired
Key data: 45 mm, 130 mm, 13 mm
Punching force: 70 ton Punching capacity: Ø 28 in 20 mm steel Projection: 300 mm Scissors: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flat steel 45 mm round steel Notching: 100 x 13 mm Equipped with: - Electric length stop 1000 mm - Various accessories - 2 stations machine Country of origin: Spain Motor power: 7.5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg
Bundle steel tube; diameter 51mm; Number of tubes on a bundle is 51 pieces
Grinding wheel diameter: approx. 60 mm
Measuring and marking plateCast steel-grey cast iron heavily ribbedLength 1000 mmWidth 1000 mmThickness 54/225 mmWorking height approx. 800 mm- 4 pieces feet with adjustment screws for aligning the plateWeight 390 kggood surface; used
Profile steel shears with - 1 foot trigger - Support tables - Rectangular notches - Hole punch incl. tools Round steel 32 mm Square steel 30 mm Angle steel 80 x 80 x 8 mm Cutting capacity flat steel 80 x 13 mm Punching force 36 t Projection 170 mm Working stroke 28 mm Working height 980 mm Material thickness 28 x 13 mm Hole diameter in sheet thickness 25x10 / 30x8 mm Machine weight approx. 0.8 t Space requirement approx. 1.2 x 0.8 x 1.9 m Condition: unchecked (6)
Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380
Bundle steel tube; diameter 51mm; Number of tubes on a bundle is 51 pieces
Buyer is responsible for proper and safe dismantling on the collection day
A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.
20.000 litre, Stock number: T1168, Sugar silo, steel 37,, closed, standing., Insulated, outside coated with trapez plate., Conical top and bottom., Tank cover in the top., Cyclone in the top., Vibrating conveyor., Cell sluice in the bottom., Ø 2650 mm., Litre: 20.000, Material: Steel 37
Anleger Einzelbogen - Single Sheet Feeder Stahl Solo M2222 Year 1985 - Serial-No. 29327/85 Solo Feeder / Einzel-Anleger Unterflur-Sauganleger / Non-Stop Feeder
Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used
Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg
S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...
pressure: 60,0 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120x120x12 mm punching cross-cut in cmm: Ø28 in 15 / Ø38 in 11 mm throat: 220 mm flat steel: 200x20 / 300x15 mm blade length: 317 mm oil volume: 45,0 ltr. work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: 55,0 mm total power requirement: 4,0 kW weight of the machine ca.: 1425 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg
️ Astron steel hall 30 × 78 × 5.5 m (approx. 2,340 m²) – cantilevered, insulated, for dismantling Used industrial steel hall from Astron – self-supporting without internal supports, with insulated roof, complete SHEV continuous roofs and large door systems. Ideal for reuse as a warehouse, production or logistics hall. Technical data at a glance • Type: Astron AZM 1. • Dimensions: 30.00 m × 78.00 m × 5.50 m → approx. 2,340 m². • Frame spacing: 10 × 7.80 m. • Roof pitch: 10% (≈ 5.71°). • Snow load: 0.75 kN/m² – Wind load: 0.50 kN/m². • Supporting structure: steel St 52 – self-supporting, coated (similar. RAL 7040 grey). • Purlins/latches: galvanized, Z and C profiles. • Roof: double-skinned with 100 mm insulation (WOF), plastisol 100 μm on the outside. • Walls: trapezoidal sheet metal cream white (RAL 9001 / 1015), south s ...
A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.
used
1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm
used
gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation
Measuring and marking plate cast steel-grey cast iron strongly ribbedwith mounting bracket made of steel, 565 mm highYear of construction approx. 1985Length: 1200 mmWidth: 800 mmThickness: 35/150 mmWorking height: 1030 mmWeight approx. 550 kgwith metal basevery good surface; used
Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used
maximum number of results exceeded
please refine your search
