stainless steel transport used for sale

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Tank size -: Diameter 2400 mm x 3500 mm (H)" x 150mm Cone Material: Stainless Steel 304 3.0mm thk 2B Plate. Materials used: 1. sis Plate 5"x10'x3 mm. SUS304 2. s/s Angle bar 50x50x4.5 mm. SS400 3. 3. s/s Shaft Ø1/2" SUS304 4. 4. s/s FB 100x3 mm. SUS304 5. 5. Plate 4'x8'x4.5 mm. SUS304 6. 5. Plate 4'x8'x4.5 mm. SUS304 7. 6. s/s Pipe 2" Sch40 SUS304 8. sis FB 1-1/2"x4.5 mm. SUS304 9. sis Hing 2" SUS304 10. m,'s Plate 4'x8'x9 mm. SS400 11. rn/s Channel 200x90 mm. SS400 12. Filter Plate SUS304 13. Ballvalve 2" (3 pcs) STL316 14. Quick coupling 2" Aluminium 15. Motor 3 hp. 4 Pole 380 V Brand " Guiselley " footmounted 16. Warm gear PO-RD 100 ratio 1:60 brand " Wormac " - Chain coupling KC 5018 17. Coupling MT60 PLEASE CONTACT +660937478585 (THAILAND NUMBER) Factory F6

Tank size -: Diameter 2400 mm x 3500 mm (H)" x 150mm Cone Material: Stainless Steel 304 3.0mm thk 2B Plate. Materials used: 1. sis Plate 5"x10'x3 mm. SUS304 2. s/s Angle bar 50x50x4.5 mm. SS400 3. 3. s/s Shaft Ø1/2" SUS304 4. 4. s/s FB 100x3 mm. SUS304 5. 5. Plate 4'x8'x4.5 mm. SUS304 6. 5. Plate 4'x8'x4.5 mm. SUS304 7. 6. s/s Pipe 2" Sch40 SUS304 8. sis FB 1-1/2"x4.5 mm. SUS304 9. sis Hing 2" SUS304 10. m,'s Plate 4'x8'x9 mm. SS400 11. rn/s Channel 200x90 mm. SS400 12. Filter Plate SUS304 13. Ballvalve 2" (3 pcs) STL316 14. Quick coupling 2" Aluminium 15. Motor 3 hp. 4 Pole 380 V Brand " Guiselley " footmounted 16. Warm gear PO-RD 100 ratio 1:60 brand " Wormac " - Chain coupling KC 5018 17. Coupling MT60 PLEASE CONTACT +660937478585 (THAILAND NUMBER) Factory F6

New 10.000 litre tank, Stock number: T10B4-1, Litre: 10.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1” and Ø 4” - Bottom Ø 2½”, Inner diameter: Ø 2050 mm., Cylinder: H 3000 mm., Total height: H 3954 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 90.000 litre tank, Stock number: T90F4-1, Litre: 90.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3350 mm., Cylinder: H 10500 mm., Total height: H 10977 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 40.000 litre tank, Stock number: T40B4-1, Litre: 40.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 6000 mm., Total height: H 7224 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 25.000 litre tank, Stock number: T25B4-1, Litre: 25.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bund Ø 2½, Inner diameter: Ø 2600 mm., Cylinder: H 4500 mm., Total height: H 5627 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 50.000 litre tank, Stock number: T50B4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 30.000 litre tank, Stock number: T30B4-1, Litre: 30.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bottom Ø 2½”, Inner diameter: Ø 2500 mm., Cylinder: H 6000 mm., Total height: H 7100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,05, Working pressure: None, Manufacturer: Handing

New 20.000 litre tank, Stock number: T20B4-1, Litre: 20.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 3 og Ø 4 - Bottom Ø 3”, Inner diameter: Ø 2350 mm., Cylinder: H 4500 mm., Total height: H 5549 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 80.000 litre tank, Stock number: T80F4-1, Litre: 80.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3400 mm., Cylinder: H 9000 mm., Total height: H 9484 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 60.000 litre tank, Stock number: T60F4-1, Litre: 60.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3250 mm., Cylinder: H 7500 mm., Total height: H 7964 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 70.000 litre tank, Stock number: T70F4-1, Litre: 70.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 7500 mm., Total height: H 7997 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 3.000 litre tank, Stock number: T3B4-1, Litre: 3.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 1560 mm., Cylinder: H 1500 mm., Total height: H 2162 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 5.000 litre tank, Stock number: T5B4-1, Litre: 5.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 2000 mm., Cylinder: H 1500 mm., Total height: H 2349 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 35.000 litre tank, Stock number: T35B4-1, Litre: 35.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2500 mm., Cylinder: H 7000 mm., Total height: H 8100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings are sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 50.000 litre tank, Stock number: T50F4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 2950 mm., Cylinder: H 7500 mm., Total height: H 7923 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 100.000 litre tank, Stock number: T100F4-1, Litre: 100.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 10500 mm., Total height: H 10959 mm., Plate type: The tank is made of pickled B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

steel tank 50 m³ / 50,000 litres underground tank / fire fighting water tank / water cistern underground storage in good condition, diesel fuel tank, fuel oil tank volume: 50 m³ / 50.000 litres material: steel tank dimensions: appr. Ø 2,50 m x ca. 10,00 m weight: appr. 8-10 t single-walled, bitumen insulation on the outside The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, molasses, liquid manure, canola oil, seeping juice, AHL/ASL, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sol ...

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

approx. 25 m ³ / 25,000 litres steel tank / firefighting water tank / water container / water cistern / storage container / water tank: good condition content: 25 m³ / 25,000 litres Material: stainless steel tanks, above ground or underground tank Dimensions: approx. Ø 2.00 m x 8.00 m approximately Weight: approx. 6.0 t The tank is repainted from the outside with a bitumen paint, see picture above. The container is used, inside empty and properly cleaned. According to the age traces are present. The container can be used as storage tank for water, manure, AHL, ASL, seepage juice, rapeseed oil, rain collection tank, fire water tank, water tank, water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changi ...

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

P5 used 50 m³ / 50.000 litres steel tank, double wall, above ground or underground tank, on 2 steel bases, good condition Dimensions: diameter approx. 2,50 m (without base) height: 2.78 m high (with base) length: 10.70 m base width: approx. 0.90 m base distance: 7,86 meters DIN6608 D steel tank, coated on the inside with a 7-fold burnt-in varnish. The tank is double-walled and stands on 2 steel bases. the steel tank / container can be used as fire-fighting water tank, storage tank for water, manure, AHL, ASL, seeping juice, canola oil, rainwater collection tank, etc.. We ca modify the tank to suit your needs as well, e.g. as a fire-fighting water tank or as an underground tank fitted with an outer bitumen coating: please ask us. Price upon request. Transport can be arranged at low cost. Item location is 79098 Freiburg im Breisgau. It is not possible to upd ...

appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Steelyard with tare balancing device Manufacturer: Pfister scales GmbH Augsburg Type: N 300 Minimum load: 50 kg Maximum load: 2000 kg Mass Bridge: 1.5 m x 1.25 m In good condition!

Large number of used food tanks at a special price! Steel tanks in good condition, above ground, standing on 6 bases. Contents: approx. 60 m ³ / 60,000 litres, coated inside Dimensions: approx. Ø 3.10 m x 8.50 m high, with base approximately 10 m overall height weight: 8, 0 t. The tank is lined with a high-quality, food-approved inner coating, see photo. Completely drainable, manhole, and more. Can be used for liquid fertilizer, as raintank, storage tank for water, for liquid feed, whey, animal feed, pig feed, stillage, potato steam skins, molasses, manure, AHL, ASL, seeping juice, canola oil, cooking oil. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has ...

Stainless steel execution Infeed height: 400 mm Spout height: 1700 mm With drive motor With plastic mats chain Mobile on castors

approx. 40 m³ / 40,000 litres steel tank, aboveground storage tanks, 2 steel bases, former palm oil tank, outer side newly painted (color may vary from the picture). As underground tank the tank will be painted with black Bitumen on demand. Contents: approx. 40 m³ / 40,000 litres Material: Steel Length: 9,00 m Diameter: 2,50 m Year of manufacture: 2007 The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, liquid feed, manure, whey, potato steam skins, molasses, seeping juice, canola oil, palm oil, or as a rainwater storage tank, firefighting water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Steel platform with ladder, steel construction, machine platform, steel scaffolding used Manufacturer: EHINGER IMPIANTI Height to platform approx. 4.2 m + 1.1 m railing Pedestal 1.7 x 1.9 m Ladder with back protection Dimensions total approx. 1.7 x 2.7 x 5.3 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.